单选题A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）A OSPFB RIPC FSPFD VSANs
单选题
A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）
A
OSPF
B
RIP
C
FSPF
D
VSANs
参考解析
解析：
暂无解析
相关考题：
An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs.For each given LPAR how should they add the PCI card to the LPAR profile?() A.Add the fibre channel card as hared?Add the fibre channel card as ?hared?B.Add the fibre channel card as irtual?Add the fibre channel card as ?irtual?C.Add the fibre channel card as esired?Add the fibre channel card as ?esired?D.Add the fibre channel card as equired?Add the fibre channel card as ?equired?
A virtual storage area network (VSAN) is a collection of ports from a set of connected Fibre Channel switches, that form a virtual fabric. Which technology allows centralized storage services to be shared across different VSANs?（）A.IVRB.FSPFC.FICOND.SANTap
Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking.Fibre Channel is standardized in the T11 Technical Committee of the InterNational Committee for Information Technology Standards (INCITS), an American National Standards Institute (ANSI) Caccredited standards committee.Which two of these correctly describe Fibre Channel?（）A. supports multiple protocolsB. works only in a shared or loop environmentC. allows addressing for up to 4 million nodesD. provides a high speed transport for SCSI payloads
In a Cisco Unified Computing System， where are SAN port channels connected to？（）A、 Only to Cisco Fibre Channel switchesB、 Only to Cisco Fibre Channel switches in NPIV modeC、 To any Fibre Channel switchD、 Directly to storage arraysE、 Only to Nexus Switches
What is the appliance port used to connect to in a Cisco Unified Computing System？（）A、 Fibre Channel storageB、 UCS C-Series serversC、 NFS storageD、 UCS chassisE、 Other fabric interconnect
A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）A、 OSPFB、 RIPC、 FSPFD、 VSANs
Which command is used to determine if a host has logged in to the Fibre Channel fabric？ （）A、 show flogi databaseB、 show system fc loginC、 show npv flogi-tableD、 show npv fcns databaseE、 show interface vfc X flogiF、 show interface flogi
A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other services. Higher redundancy over FC-AL, P2P.Which path selection protocol is used by Fibre Channel fabrics?（）A、OSPFB、RIPC、FSPFD、VSANs
Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）A、The FCoE card provides both LAN and fibre channel function from a single card on the blade. B、The FCoE advanced technology removes the need for any BladeCenter switching to support this function.C、Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.D、The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.
Which statement about Cisco Unified Fabric switches is correct？ （） A、 The Nexus 5000 family of switches does not support vPC when running in either NPV or FCoE NPV mode.B、 The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C、 The Nexus 7000 Series Switches can support the NPIV mode of operation， but cannot function as a complete Fibre Channel Forwarder.D、 The Nexus 7000 Series Switches cannot support advanced Cisco Fibre Channel features such as IVR.E、 The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions.
Which two Fibre Channel features are not supported in Cisco Nexus 5500 and Nexus 5000 platforms？ （）A、 port securityB、 fabric bindingC、 IVRD、 port trackingE、 FICON
Fibre channel requires which of the following elements？（）A、 FC InitiatorB、 Multi-Mode fibreC、 Physical AdapterD、 Fibre Target Management Agent
What types of host connectivity are available on the Storwize V7000?（）A、Fibre Channel and SAS B、Fibre Channel and iSCSI C、Fibre Channel, iSCSI and SAS D、Fibre Channel, iSCSI and InfiniBand
A customer is ready to order a pSeries solution. However， the pSeries technical specialist is unsure whether the customer preferred the fibre channel or the external SCSI disk attachment option. What is the most appropriate action for the specialist to take next？（）A、Ask the customer to confirm which option is best for their environment.B、Order the fibre channel option and purchase a converter later if necessary.C、Order both SCSI and fibre channel adapters to cover both potential options.D、Inform the customer that fibre channel was selected for performance reasons.
A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）A、Configure 2CFFh combination fibre channel / gigabit Ethernet adaptersB、Configure 1CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapterC、Configure 1CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapterD、Configure 1CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter
An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs. For each given LPAR how should they add the PCI card to the LPAR profile?（）A、Add the fibre channel card as hared?Add the fibre channel card as ?hared?B、Add the fibre channel card as irtual?Add the fibre channel card as ?irtual?C、Add the fibre channel card as esired?Add the fibre channel card as ?esired?D、Add the fibre channel card as equired?Add the fibre channel card as ?equired?
A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）A、You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch B、Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch C、Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switchD、The NPIV switch will count against the number of domains in a fabric
A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）A、Configure 2 CFFh combination fibre channel / gigabit Ethernet adaptersB、Configure 1 CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapterC、Configure 1 CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapterD、Configure 1 CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter
单选题Fibre channel requires which of the following elements？（）A FC InitiatorB Multi-Mode fibreC Physical AdapterD Fibre Target Management Agent
单选题A virtual storage area network (VSAN) is a collection of ports from a set of connected Fibre Channel switches, that form a virtual fabric. Which technology allows centralized storage services to be shared across different VSANs?（）AIVRBFSPFCFICONDSANTap
单选题Which command is used to determine if a host has logged in to the Fibre Channel fabric？ （）A show flogi databaseB show system fc loginC show npv flogi-tableD show npv fcns databaseE show interface vfc X flogiF show interface flogi
单选题In a Cisco Unified Computing System， where are SAN port channels connected to？（）A Only to Cisco Fibre Channel switchesB Only to Cisco Fibre Channel switches in NPIV modeC To any Fibre Channel switchD Directly to storage arraysE Only to Nexus Switches
单选题Which statement describes multihop FCoE function when an FCoE switch receives an FCoE frame from the directly connected FCoE host？（）A The switch receives the FCoE frame and forwards it to another switch over its VE port.B The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the fabric over its Fibre Channel uplink port.C The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the Fibre Channel target over its Fibre Channel port.D The switch receives the FCoE frame and forwards it to another FCoE device over its VN port.
多选题What is the use of NPV in Cisco Unified Computing Systems？ （）ACompatibility with third-party Fibre Channel switchesBFaster throughputCReduce domain IDs in a Fibre Channel environmentDSupport for increased number of VSANsESupport for SAN port channels
单选题A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）AYoucan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet SwitchBUsing blade servers with the NPIV switch will require morefibre ports on the external fibre switchCStorage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.DThe NPIV switch will count against the number of domains in a fabric
多选题Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking.Fibre Channel is standardized in the T11 Technical Committee of the InterNational Committee for Information Technology Standards (INCITS), an American National Standards Institute (ANSI) Caccredited standards committee.Which two of these correctly describe Fibre Channel?（）Asupports multiple protocolsBworks only in a shared or loop environmentCallows addressing for up to 4 million nodesDprovides a high speed transport for SCSI payloads
单选题What is the appliance port used to connect to in a Cisco Unified Computing System？（）A Fibre Channel storageB UCS C-Series serversC NFS storageD UCS chassisE Other fabric interconnect