单选题A customer wants to run eight production partitions each with the following： ？ 0.7 CPU 1.65-GHz ？ 4GB of RAM ？ 2 Ethernet adapters They do not have room for many RIO drawers since rack space is currently scarce in their data center. They have significant unused SAN attached disk. In addition to the Advanced POWER Virtualization feature， which of the following is the minimum recommended configuration needed to meet the customer’s requirements？（）Ap5-570 6-way 1.65-GHz， 32GBBp5-570 8-way 1.65-GHz， 32GBCp5-570 6-way 1.65-GHz， 48GBDp5-570 8-way 1.65-GHz， 48GB
单选题
A customer wants to run eight production partitions each with the following： ？ 0.7 CPU 1.65-GHz ？ 4GB of RAM ？ 2 Ethernet adapters They do not have room for many RIO drawers since rack space is currently scarce in their data center. They have significant unused SAN attached disk. In addition to the Advanced POWER Virtualization feature， which of the following is the minimum recommended configuration needed to meet the customer’s requirements？（）
A
p5-570 6-way 1.65-GHz， 32GB
B
p5-570 8-way 1.65-GHz， 32GB
C
p5-570 6-way 1.65-GHz， 48GB
D
p5-570 8-way 1.65-GHz， 48GB
参考解析
解析：
暂无解析
相关考题：
A customer wants to run eight production partitions each with the following： ？ 0.7 CPU 1.65-GHz ？ 4GB of RAM ？ 2 Ethernet adapters They do not have room for many RIO drawers since rack space is currently scarce in their data center. They have significant unused SAN attached disk. In addition to the Advanced POWER Virtualization feature， which of the following is the minimum recommended configuration needed to meet the customer’s requirements？（）A、p5-570 6-way 1.65-GHz， 32GBB、p5-570 8-way 1.65-GHz， 32GBC、p5-570 6-way 1.65-GHz， 48GBD、p5-570 8-way 1.65-GHz， 48GB
A database administrator wants a unique IP address for each of three instances of a database. Normally，all instances run on a large production node，but they may fallover to different standby nodes according to the dynamic node priority configuration. What is the best way to obtain unique addresses for each of the three database instances？（）A、 There is no way since this cannot be configured with HACMPB、 Use IP Replacement address takeover and define all service addresses on the same NICC、 Use IP Aliasing for address takeover and define each alias in a separate resource groupD、 Use EtherChannel to map the three alias IP addresses to the common service address defined to HACMP
You need to design a monitoring strategy to meet business requirements for data on servers in the production department. What should you do？（）A、Use the Microsoft Baseline Security Analyzer （MBSA） to scan for Windows vulnerabilities on all servers in the production departmentB、Run Security and Configuration Analysis to analyze the security settings of all servers in the production departmentC、Enable auditing for data on each server in the production department. Run System Monitor on all servers in the production department to create a counter log that tracks activity for the Objects performance objectD、Create a Group Policy Object （GPO） that enables auditing for object access and link it to the product department’s Servers OU. Enable auditing for data on each server in the production department
A small organization is purchasing a POWER5 to consolidate four applications. Currently， each application has two Host Bus Adapters （HBA） connected to an Enterprise Storage Server （ESS）. The customer is concerned about the cost of purchasing eight new HBAs. Which feature of virtualization will be most beneficial to this organization？（）A、Virtual EthernetB、Micro-PartitioningC、Virtual I/O ServerD、Capped and uncapped partitions
Companycom is planning to do server consolidation on POWER5. The customer has a test environment, a QA environment and a production environment for two applications. Both the test and QA environments are very small and are only utilized when new releases are being developed and tested. They require less than 1 CPU each. Both production applications require 2 CPUs for day-to-day operation and can require up to an additional 2 CPUs each during abrupt peak requirements. What is the best design for the LPARs?（）A、Use micropartitioning for test and QA environments, and DLPAR for the production applications B、Use micropartitioning for test and QA environment, and CPU pooling for the production applications C、Create standard LPARs for all test, QA, and production applications to keep all partitions separate and isolated. D、Create DLPAR partitions for all test, QA, and production applications to keep test from disturbing production environment.
A system is being planned with three production partitions, one each for an IBM i, AIX standard edition, and Power Linux applications. One fibre-channel attached TS3100 tape library will be shared between the partitions for backup. Which solution provides tape library sharing with minimum operator intervention?（）A、Configure VIO Server Express Edition to control the tape library through one fibre channel card.Assign the library to the production partitions when needed.B、Configure the IBM i partition to own the tape library.Use IBM i virtualization to host a virtual tape libraryconnection to the AIX and Linux partition.Assign the library to the production partitions when needed.C、Configure a fibre channel card for each partition， and a configure fibre switch.Connect the partitions and tape library to the switch.Zone the switch so all partitions can enable the tape when needed and disable the tape when finished.D、Configure AIX to control the tape library through one fibre channel adapter.Use AIX virtualization to host a virtual tape library connection to the IBM i and Linux partitions.Assign the library to the production partitions when needed.
A customer wants to run VMWare ESX on an x445 with a large number of virtual machines running Windows 2003 Server as a Disaster Recovery （DR） Site for the production environment. Which of the following questions would most impact the memory configuration？（）A、What version of VMWare ESX Server is being considered？B、Do the systems currently use Double Data Rate （DDR） memory？C、What is the total number of processors installed in the production systems？D、What is the total amount of memory currently being used across all the production systems？
A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000. What is required for the customer to be able to perform this？（）A、Fibre Channel Expansion Card for each Blade ServerB、cKVM Card for each Blade ServerC、iSCSI Expansion Card for each Blade ServerD、4Gb Modular Flash Drive
A customer is installing an HMC-managed Power 720 with two partitions, one for Production the other for Testing. They plan to use the Testing partition only occasionally and want to minimize hardware. Which of the following meets these requirements?（）A、Create a system profile for each partition. Assign all needed resources as 'required'.B、Define all system resources as 'desired' on the Testing partition. Activate only as needed.C、Create two shared processor pools. Assign the minimal I/O resources required for each partition to the shared pools.D、Create both partitions with minimal 'required' resources, and optional resources as 'desired'. Activate each partition as necessary.
A customer has 12 x445s and 20 x365s in their datacenter that are dedicated to production workloads. The customer wants to standardize on IBM Director as their Intel environment systems management platform. Which server platform is supported as a Director server？（）A、zSeriesB、pSeriesC、iSeriesD、iSeries with IXA Adapter
A customer wants to run DB2 on a Power 780 with uncapped partitions. They have licensed DB2 for 32 of the 64 active cores， and will use it in multiple partitions. How can the customer ensure that the number of licenses purchased for DB2 is not exceeded？（）A、Create a 32-core shared processor pool for the DB2 partitions.B、Limit the number of virtual processors on each DB2 partition to 32.C、Use the IBM License Metric Tool to dynamically manage DB2 usage in the partitions.D、Set the ‘Desired Processing Units’ in each DB2 partition profile so that the sum of all partitions equals 32.
A customer has an HMC-managed Power Systems server with 6 partitions. Four production partitions are subject to varying workloads throughout the day, and two are used for development and testing. The production applications have different licensing limitations on the number of physical cores that may be used. The development partitions can use no more than 1 core. The customer would like to dynamically optimize processor utilization within the licensing limits, with minimal operator intervention. Which of the following meets the customer requirement?（）A、Define the production partitions' maximum CPU to the licensing limitations. Define the development/test partition maximums to one core. Configure each partition to be capped.B、Define the production partitions' maximum CPU to the licensing limitations. Define the development/test partition maximums to one core. Configure each partition to be uncapped.C、Define the production partitions' maximum CPU to the licensing limitations. Define the development/test partitions to use no more than one core. Configure the HMC scheduler to dynamically assign processors among the pools over a day.D、Create a shared processor pool for each production partition, with the maximum processor limit set to the licensing limit for the application in the pool. Assign the development and testing partitions to a processor pool with a maximum of 1 core. Configure each partition to use uncapped processing.
An administrator wants to test the performance of an application at different memory sizes. What is the most effective way to perform the test and collect statistical information for each test？（） A、Run DLPAR to change the LPAR memory for each test.B、Run rmss command to simulate different memory for each test.C、Run chdev command to limit the system memory size for each test.D、Run chattr command to limit the system memory size for each test.
A customer is looking for a reliable well-performing， cost-effective solution to a growing commercial workload. Initially， they want to run 12 UDB partitions， each of which would need two processors and 8GB of memory. They are looking at the p655 and want to start with three LPARS on each p655 node using a total of four nodes. Each LPAR would need at least 4 x 6239 fibre cards and 2 x 5706 2-port 10/100/1000 Ethernet cards. At a later date， they want to add an additional LPAR to each node to expand to a total of 16 UDB partitions. Which of the following major limitations of this solution should be mentioned to the customer？（）A、The p655 supports only two LPARs.B、The p655 supports only four LPARs.C、There are not enough available slots for three LPARs.D、There are not enough available slots for four LPARs.
A retail customer has an 8-core Power 740 server with 2 partitions. Production has 4 dedicated cores and the test partition has 2 dedicated cores. Both partitions run during the day without problems. At night, batch processing is exceeding the run window. Which solution addresses this problem without requiring additional hardware?（）A、AddingVMControl will automate processor resource allocation during peak workloads.B、Enable Dynamic Symmetric Multithreading in the HMC to balance workloads across processors.C、Add processing resources during the times they are required using Utility Capacity on Demand.D、Changing the partitions to Uncapped can make use of additional processor cycles during peak workloads.
Company.com is adding a new I/O drawer to an existing p5-570 with four LPARs and wants to re-balance the network cards in the I/O drawers. What is the best way to accomplish this？（）A、Add the devices as virtual adapters to a VIO server first,then add the I/O drawer and create the shared ethernet adaptersB、Power down the partitions,run the diag a command when the system is brought back up and reconfigure the network cardsC、Use the rmdev command to remove the devices,shut down the partitions and move the cads,then run the cfgmgr command after rebootD、Detach the network cards,run rmdev on the devices and then dynamically reassign theadapters to the partitions and reconfigure
A customer wants to run a Domino e-mail application，a Business Intelligence database，and a batch processing application on Linux.The workloads have different behaviors and do not have peaks at the same time. What is a benefit of running these applications on a Power Systems server instead of running on separate x86 servers？（）A、Each Linux application can run in a Workload Partition， reducing the management efforts.B、Total cost of Linux applications on Power Systems is more cost effective than on x86 because of platform licensing.C、Memory cloning can be used on the Power Systems to have a single image of the Linux kernel shared by all partitions.D、Using micro-partitions on Power Systems allow the workloads to share the processing resources， increasing the overall system utilization.
单选题A customer wants to run a Domino e-mail application，a Business Intelligence database，and a batch processing application on Linux.The workloads have different behaviors and do not have peaks at the same time. What is a benefit of running these applications on a Power Systems server instead of running on separate x86 servers？（）AEach Linux application can run in a Workload Partition， reducing the management efforts.BTotal cost of Linux applications on Power Systems is more cost effective than on x86 because of platform licensing.CMemory cloning can be used on the Power Systems to have a single image of the Linux kernel shared by all partitions.DUsing micro-partitions on Power Systems allow the workloads to share the processing resources， increasing the overall system utilization.
单选题A toy manufacturing customer wants to run Microsoft SQL Server. Which category is applicable for such a solution？（）AE-mailBDatabaseCNetwork InfrastructureDSystems Management
单选题A customer has two Power 770 systems with 4 enclosures each. Thirty two cores and 1TB of memory are activated on each system. Each system has 3 database partitions and each partition has 10 cores and 300GB of memory. Which solution will provide automated recovery of unplanned outages at least cost？（）APurchase PowerVM Enterprise Edition.Use System Director to automate Live Partition Mobility to recover from partition failureBCreate additional shared processor partitions as standby nodes.Use PowerHA SystemMirror to activate and use CoD resources when a failover occursCPurchase an additional 32-core Power 750 with PowerHA SystemMirror Standard Edition.Use the new system as standby node with the XD component of PowerHADPurchase an additional Power 770 system.Locate production and standby database partitions on each system.Use DB2 pureScale to provide automated partition monitoring and failover
单选题Company.com with limited AIX skills has purchased a p5-520 2-way which will run Micro-Partitions. To reduce the initial cost of purchase， the customer will be sharing the system resources using a VIO server. The customer is concerned about managing the installation of the operating system. Which of the following should the customer perform？（）AUse alt_disk_install to install AIX on all logical partitions.BConfigure the DVD as a desired resource on all partitions.CConfigure all resources as shared resources between all partitions.DCreate a separate NIM server to manage the installation of all partitions.
单选题A customer is looking for a reliable well-performing， cost-effective solution to a growing commercial workload. Initially， they want to run 12 UDB partitions， each of which would need two processors and 8GB of memory. They are looking at the p655 and want to start with three LPARS on each p655 node using a total of four nodes. Each LPAR would need at least 4 x 6239 fibre cards and 2 x 5706 2-port 10/100/1000 Ethernet cards. At a later date， they want to add an additional LPAR to each node to expand to a total of 16 UDB partitions. Which of the following major limitations of this solution should be mentioned to the customer？（）AThe p655 supports only two LPARs.BThe p655 supports only four LPARs.CThere are not enough available slots for three LPARs.DThere are not enough available slots for four LPARs.
单选题A small IT department is deploying Power 720 servers exploiting virtualization technologies. Each Power 720 will have two partitions， one with 6 cores and one with 2 cores， and both partitions having 32GB of memory each. Live Partition Mobility is being considered at some point in the future. What is the minimum AIX Edition required to support the customer？（）AAIX Basic EditionBAIX Express EditionCAIX Standard EditionDAIX Enterprise Edition
单选题A customer is purchasing a 12-way p5-570 to run light development workloads on eight AIX 5.3 partitions with two network adapters each. When the current network configuration was reviewed， it was discovered that they only have four Ethernet ports available on their network switch. Which of the following solutions would prevent them from having to buy another network switch or hub？（）AAdd two HMCs with two Ethernet adapters each and run EtherChannel for the original eight partitions.BAdd two HMCs with two Ethernet adapters each and run Virtual Ethernet for the original eight partitions.CAdd two hosting partitions with two Ethernet adapters each and run EtherChannel for the original eight partitions.DAdd two hosting partitions with two Ethernet adapters each and run Virtual Ethernet for the original eight partitions.