单选题A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）AThe profile data was not initialized after restoring the backup CDBThe profile data was not backed up before doing the Critical Console Data backupCA Critical Console Data backup was performed which backs up user data， but not profile dataDA Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included
单选题
A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）
A
The profile data was not initialized after restoring the backup CD
B
The profile data was not backed up before doing the Critical Console Data backup
C
A Critical Console Data backup was performed which backs up user data， but not profile data
D
A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included
参考解析
解析：
暂无解析
相关考题：
An administrator has shut down a server to install additional memory. When the administrator restarts the server after the upgrade, it times out. Which of the following could be the cause of the problem?（）A. Processor failureB. Third party memoryC. Disk drive failureD. ESD during the upgradeE. Backplane failure
A system administrator notices that one of the mirrored disks, hdisk7 on datavg, has had a hardware failure. What is the best method of recover without causing additional problems?() A.unmirrorvg datavg hdisk7 reducevg datavg hdisk7 replace the physical volume, run cfgmgr extendvg datavg hdisk7 mirrovg datavg hdisk7B.varyoffvg datavg Rmdev -l hdisk7 -d Replace the physical volu,e run cfgmgr The system will automatically remirror when the disk is replacedC.unmirrorvg datavg hdisk7 rmdev -l hdisk7 - d replace the physical volume, run cfgmgr extendvg datavg hdisk7 The system will automatically remirror when the disk is replaced.D.unmirrorvg datavg hdisk7 reducevg data hdisk7 rmdev -l hdisk7 -d replace the physical volume, run cfgmgr extendvg datavg hdisk7 mirrovg datavg
Disk boot failure insert system disk and pressenter是什么意思（）A、系统错误引起文件丢失B、内存条问题引起文件丢失C、系统问题电子盘丢失D、系统问题引起文件丢失
An administrator has shut down a server to install additional memory. When the administrator restarts the server after the upgrade, it times out. Which of the following could be the cause of the problem?（）A、Processor failureB、Third party memoryC、Disk drive failureD、ESD during the upgradeE、Backplane failure
A technician receives an error message ‘inaccessible boot device’ on their monitor. Which of thefollowing components is causing the issue?（）A、Hard disk drive failureB、NTLDR file is missingC、BIOS is corruptedD、System board failure
What must an administrator do to create two new volume groups on a system with only one spare disk?（）A、Run the 'mkvg -M' command to create multiple volume groups on a single diskB、Add a new disk to the system or release a disk from the one of the existing volume groupsC、Run the 'mkvg' command to create multiple volume groups on a single disk providing the disk does nothave a PVIDD、Run the 'mkvg' command to create multiple volume groups on a single disk providing the volume groups have the same PP size
After using the alt_disk_install command to clone a system image to another disk, the system administrator noticed a large number of defined devices not allocated to the LPAR. Which of the following is the most likely cause of this situation?（）A、The cfgmgr command was not run to reconfigure the devicesB、The machine was not booted into SMS MultiBoot mode after configurationC、The machine was not in full system partition mode when the volume was createdD、The alt_disk_install command was not run with the -O option to remove references in the ODM
An AIX system administrator has setup disk quotas. Where can the reports be found on the system?（）A、/var/adm/acct/sum B、/var/adm/ras C、/usr/sbin/acct D、/var/adm/wtmp
A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）A、The profile data was not initialized after restoring the backup CDB、The profile data was not backed up before doing the Critical Console Data backupC、A Critical Console Data backup was performed which backs up user data， but not profile dataD、A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included
A system administrator issued the errpt command and had no results. The system administrator determined that error logging was turned off. Which of the following commands should be used to start logging system errors？（）A、/usr/bin/errmsgB、/usr/lib/errdemonC、/usr/lib/errloggerD、/usr/bin/errinstall
An administrator is notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 has been powered off. Upon restarting Node1 the administrator checks the AIXerror log and the cluster.log Which of the following is the most likely cause of the failure of Node1？（）A、The operating system crashedB、A disk failure forced a volume group off lineC、The System Resource Controller executed a system haltD、The topology services daemon has crashed due to an ODM mismatch
A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）A、The routes on the HMCB、The firewall setting of the LAN adapterC、The name resolution protocol on the p5 590 serverD、The subnet mask settings on the Ethernet adapters
If a system administrator wants to show only a disk report for disk2, at two second intervals, what is the correct command to run?（）A、 iostat disk1 1 B、 iostat -d disk1 2 C、 iostat disk2 1 D、 iostat -d disk2 2
A system administrator received the following message while trying to ssh to a server： connection timed out.The administrator pinged the server and had no response. The administrator then pinged the gateway， and was successful. Which tool could the administrator use next to isolate the problem？（）A、routeB、tracerouteC、netstat -nrD、broadcast ping
A system administrator was able to boot a system from the AIX installation CDROM. The migration install was selected, but the process hung at 92% complete. The system administrator then rebooted the system, which subsequently hung at LED 552. Which of the following options is the most probable cause?（）A、The ODM is corrupted.B、There is a hardware failure.C、The bosboot command failed.D、Not enough space is available in the filesystems.
A System p administrator needs to replace a failed internal disk in a mirrored rootvg. Which of thefollowing is one of the steps that would need to be followed（）A、Run cfgmgrB、odmdelete CuAtC、exportvg rootvgD、Deallocate LPs from failed disk
A system administrator notices that one of the mirrored disks, hdisk7 on datavg, has had a hardware failure. What is the best method of recover without causing additional problems?（）A、unmirrorvg datavg hdisk7 reducevg datavg hdisk7 replace the physical volume, run cfgmgr extendvg datavg hdisk7 mirrovg datavg hdisk7B、varyoffvg datavg Rmdev -l hdisk7 -d Replace the physical volu,e run cfgmgr The system will automatically remirror when the disk is replacedC、unmirrorvg datavg hdisk7 rmdev -l hdisk7 - d replace the physical volume, run cfgmgr extendvg datavg hdisk7 The system will automatically remirror when the disk is replaced.D、unmirrorvg datavg hdisk7 reducevg data hdisk7 rmdev -l hdisk7 -d replace the physical volume, run cfgmgr extendvg datavg hdisk7 mirrovg datavg
An administrator is ordering a new Power 550. They will mirror rootvg and are concerned about single points of failure. Which of the following features should be ordered（）A、Dual I/O planar， dual disk drives， dual SCSI adaptersB、Dual disk drive enclosures， dual disk drives， extra media bayC、Dual disk drive enclosures， dual disk drives and dual SCSI adaptersD、Dual I/O planar， extra media bay， dual disk drives
单选题A system administrator issued the errpt command and had no results. The system administrator determined that error logging was turned off. Which of the following commands should be used to start logging system errors？（）A/usr/bin/errmsgB/usr/lib/errdemonC/usr/lib/errloggerD/usr/bin/errinstall
单选题A system administrator was able to boot a system from the AIX installation CDROM. The migration install was selected, but the process hung at 92% complete. The system administrator then rebooted the system, which subsequently hung at LED 552. Which of the following options is the most probable cause?（）AThe ODM is corrupted.BThere is a hardware failure.CThe bosboot command failed.DNot enough space is available in the filesystems.
单选题An administrator identifies that a server is shutting down. The administrator powers up the server and OS loads but after a few minutes it powers down again. Which of the following is the cause?（）ARedundant power supply failureBCPU overheatingCMemory failureDHard disk failure
单选题A system administrator ran the iostat command because of system performance problems. The following iostat output is provided： Based on the output， which of the following is insufficient？（）A CPUB MemoryC Paging spaceD Disk capacityX
单选题If a system administrator wants to show only a disk report for disk2, at two second intervals, what is the correct command to run?（）A iostat disk1 1 B iostat -d disk1 2 C iostat disk2 1 D iostat -d disk2 2
单选题A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）AThe routes on the HMCBThe firewall setting of the LAN adapterCThe name resolution protocol on the p5 590 serverDThe subnet mask settings on the Ethernet adapters
单选题After using the alt_disk_install command to clone a system image to another disk, the system administrator noticed a large number of defined devices not allocated to the LPAR. Which of the following is the most likely cause of this situation?（）AThe cfgmgr command was not run to reconfigure the devicesBThe machine was not booted into SMS MultiBoot mode after configurationCThe machine was not in full system partition mode when the volume was createdDThe alt_disk_install command was not run with the -O option to remove references in the ODM
单选题A system administrator has a failed disk drive that is mirrored to another disk drive. They successfully removed the logical volume copies off of the failed disk drive. Which of the following commands should be used to remove the failed disk drive from the volume group？（）AchvgBrmdevCreducevgDexportvg
单选题An administrator is notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 has been powered off. Upon restarting Node1 the administrator checks the AIXerror log and the cluster.log Which of the following is the most likely cause of the failure of Node1？（）AThe operating system crashedBA disk failure forced a volume group off lineCThe System Resource Controller executed a system haltDThe topology services daemon has crashed due to an ODM mismatch
单选题A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）AThe profile data was not initialized after restoring the backup CDBThe profile data was not backed up before doing the Critical Console Data backupCA Critical Console Data backup was performed which backs up user data， but not profile dataDA Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included