单选题our network consists of a single Active Directory domain. The network contains two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 (SP2). You log on to Server1 by using the Administrator account for the domain. You open Event Viewer and attempt to connect to Server2 but receive the following error message. You verify that you can connect to Server2 by using Windows Explorer and that Windows Firewall is disabled on Server2.You open the Services snap-in on Server2 as shown in the exhibit. (Click the Exhibit button.)，You need to ensure that you can connect to Server2 remotely by using Event Viewer. What should you do on Server2?（）A Add the Administrator account to the HelpServicesGroup. B Set the Startup Type for the Remote Registry service to Automatic and then start the service. C Set the Startup Type for the Secondary Logon service to Disabled and then stop the service. D Set the Startup Type for the Special Administration Console Helper service to Automatic and then start the service.
单选题
our network consists of a single Active Directory domain. The network contains two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 (SP2). You log on to Server1 by using the Administrator account for the domain. You open Event Viewer and attempt to connect to Server2 but receive the following error message. You verify that you can connect to Server2 by using Windows Explorer and that Windows Firewall is disabled on Server2.You open the Services snap-in on Server2 as shown in the exhibit. (Click the Exhibit button.)，You need to ensure that you can connect to Server2 remotely by using Event Viewer. What should you do on Server2?（）
A
Add the Administrator account to the HelpServicesGroup.
B
Set the Startup Type for the Remote Registry service to Automatic and then start the service.
C
Set the Startup Type for the Secondary Logon service to Disabled and then stop the service.
D
Set the Startup Type for the Special Administration Console Helper service to Automatic and then start the service.
参考解析
解析：
暂无解析
相关考题：
our network consists of a single Active Directory domain. The network contains two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 (SP2). You log on to Server1 by using the Administrator account for the domain. You open Event Viewer and attempt to connect to Server2 but receive the following error message. You verify that you can connect to Server2 by using Windows Explorer and that Windows Firewall is disabled on Server2.You open the Services snap-in on Server2 as shown in the exhibit. (Click the Exhibit button.)，You need to ensure that you can connect to Server2 remotely by using Event Viewer. What should you do on Server2?（）A、 Add the Administrator account to the HelpServicesGroup. B、 Set the Startup Type for the Remote Registry service to Automatic and then start the service. C、 Set the Startup Type for the Secondary Logon service to Disabled and then stop the service. D、 Set the Startup Type for the Special Administration Console Helper service to Automatic and then start the service.
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You enable and configure Terminal Server on a server named Server1. A firewall separates Server1 from the internal network. Internal users report that they cannot connect to Server1 by using Remote Desktop Connection. You need to ensure that the users can connect to Server1 by using Remote Desktop Connection. Which port should you open on the firewall? （）A、389B、3268C、3389D、5900
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2).You have two servers named Server1 and Server2. Both servers have Windows Server Update Services (WSUS) 3.0 installed.You need to configure WSUS so that Server2 uses Server1 as the upstream server. What should you do on Server2?（）A、From the command prompt, run wuauclt.exe. B、From the command prompt, run wsusutil.exe. C、From the Update Services console, run the WSUS Server Configuration Wizard. D、From the Local Computer Policy, specify the location on the intranet for the Microsoft update service.
Your network consists of a single Active Directory domain. The network contains two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 （SP2）.You log on to Server1 by using the Administrator account for the domain. You open Event Viewer and attempt to connect to Server2 but receive the following error message.You verify that you can connect to Server2 by using Windows Explorer and that Windows Firewall is disabled on Server2. You open the Services snap-in on Server2 as shown in the exhibit.You need to ensure that you can connect to Server2 remotely by using Event Viewer. What should you do on Server2？（）A、Add the Administrator account to the HelpServicesGroup.B、Set the Startup Type for the Remote Registry service to Automatic and then start the service.C、Set the Startup Type for the Secondary Logon service to Disabled and then stop the service.D、Set the Startup Type for the Special Administration Console Helper service to Automatic and then start the service.
Your network consists of a single Active Directory domain. You have two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 (SP2). Server1 is the site license server for the Default-First-Site-Name site. You need to configure Server2 to be the site license server. What should you do? （）A、From the Licensing console on Server1, modify the Products View configuration.B、From the Licensing Control Panel applet on Server2, modify the Replication configuration.C、From the Active Directory Sites and Services console, modify the Licensing Site Settings.D、From the Active Directory Users and Computers console, modify the AdminSDHolder object.
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You enable and configure Terminal Server on a server named Server1. A firewall separates Server1 from the internal network. Internal users report that they cannot connect to Server1 by using Remote Desktop Connection. You need to ensure that the users can connect to Server1 by using Remote Desktop Connection. Which port should you open on the firewall? （）A、389B、3268C、3389D、5900
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The domain contains a member server named Server1. Server1 is a file server. You accidentally delete the computer account for Server1 from the domain. You need to ensure that users can access the file shares on Server1 by using their domain user accounts. You must achieve this goal by using the minimum amount of administrative effort. What should you do? （）A、On Server1, run the Netdom reset command.B、On Server1, add the computer to a workgroup and then add the computer to the domain. Restart Server1.C、From Active Directory Users and Computers, create a new computer account named Server1 in the domain. Restart Server1.D、On a domain controller, perform an authoritative restore in Active Directory for the Server1 computer account. Restart Server1.
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You deploy a server named Server1 and install Terminal Server. After four months, users report that they can connect to Server1 by using Remote Desktop Connection, but are unable to log on. You verify that the user permissions have not changed. You need to ensure that users can log on to Server1 by using Remote Desktop Connection. What should you do? （）A、Restart Server1.B、Restore the system state of Server1.C、Install and configure Terminal Server Licensing.D、Modify the Terminal Services service account on Server1.
our network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125.You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100.You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200.You need to ensure that Printer1’s IP address always remains the same. What should you create on Server2?（）A、an exclusion range B、a reservation C、a superscope D、a user class
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The domain contains a member server named Server1. Server1 is a file server. You accidentally delete the computer account for Server1 from the domain. You need to ensure that users can access the file shares on Server1 by using their domain user accounts. You must achieve this goal by using the minimum amount of administrative effort. What should you do? （）A、On Server1, run the Netdom reset command.B、On Server1, add the computer to a workgroup and then add the computer to the domain. Restart Server1.C、From Active Directory Users and Computers, create a new computer account named Server1 in the domain. Restart Server1.D、On a domain controller, perform an authoritative restore in Active Directory for the Server1 computer account. Restart Server1.
Your network consists of a single Active Directory domain. The domain contains a server named Server1. Server1 runs Windows Server 2003 Service Pack 2 （SP2）. You install Windows Support Tools on Server1. You need to view the IPSec settings applied to Server1. What command should you run on Server1？（）A、Netstat–r IPB、Netdiag/test：ipsecC、Sc query policyagentD、Netsh ipsec static show all
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). You have two servers named Server1 and Server2. Both servers have Windows Server Update Services (WSUS) 3.0 installed.You need to ensure that Server2 automatically receives the same update approvals as Server1.What should you do?（）A、On Server2, modify the Update Source and Proxy Server settings. B、On Server2, modify the Update Files and Languages settings. C、On Server2, run the Windows Server Update Services 3.0 setup wizard. D、On Server1, run the WSUS Server Configuration Wizard.
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125. You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100. You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200. You need to ensure that Printer1s IP address always remains the same. What should you create on Server2?（）A、an exclusion rangeB、a reservationC、a superscopeD、a user class
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You enable and configure Terminal Server on a server named Server1. A firewall separates Server1 from the internal network. Internal users report that they cannot connect to Server1 by using Remote Desktop Connection. You need to ensure that the users can connect to Server1 by using Remote Desktop Connection. Which port should you open on the firewall? （）A389B3268C3389D5900
单选题Your network consists of a single Active Directory domain. You have two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 (SP2). Server1 is the site license server for the Default-First-Site-Name site. You need to configure Server2 to be the site license server. What should you do? （）AFrom the Licensing console on Server1, modify the Products View configuration.BFrom the Licensing Control Panel applet on Server2, modify the Replication configuration.CFrom the Active Directory Sites and Services console, modify the Licensing Site Settings.DFrom the Active Directory Users and Computers console, modify the AdminSDHolder object.
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You deploy a server named Server1 and install Terminal Server. After four months, users report that they can connect to Server1 by using Remote Desktop Connection, but are unable to log on. You verify that the user permissions have not changed. You need to ensure that users can log on to Server1 by using Remote Desktop Connection. What should you do? （）ARestart Server1.BRestore the system state of Server1.CInstall and configure Terminal Server Licensing.DModify the Terminal Services service account on Server1.
单选题Your network consists of a single Active Directory domain. The domain contains a server named Server1. Server1 runs Windows Server 2003 Service Pack 2 （SP2）. You install Windows Support Tools on Server1. You need to view the IPSec settings applied to Server1. What command should you run on Server1？（）ANetstat–r IPBNetdiag/test：ipsecCSc query policyagentDNetsh ipsec static show all
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You enable and configure Terminal Server on a server named Server1. A firewall separates Server1 from the internal network. Internal users report that they cannot connect to Server1 by using Remote Desktop Connection. You need to ensure that the users can connect to Server1 by using Remote Desktop Connection. Which port should you open on the firewall? （）A389B3268C3389D5900
单选题Your network consists of a single Active Directory domain. You have two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 (SP2). Server1 is the site license server for the Default-First-Site-Name site. You need to configure Server2 to be the site license server. What should you do? （）AFrom the Licensing console on Server1, modify the Products View configuration.BFrom the Licensing Control Panel applet on Server2, modify the Replication configuration.CFrom the Active Directory Sites and Services console, modify the Licensing Site Settings.DFrom the Active Directory Users and Computers console, modify the AdminSDHolder object.
单选题our network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125.You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100.You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200.You need to ensure that Printer1’s IP address always remains the same. What should you create on Server2?（）Aan exclusion range Ba reservation Ca superscope Da user class
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125.You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100.You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200.You need to ensure that Printer1’s IP address always remains the same. What should you create on Server2?（）Aan exclusion range Ba reservation Ca superscope Da user class
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). You have two servers named Server1 and Server2. Both servers have Windows Server Update Services (WSUS) 3.0 installed.You need to ensure that Server2 automatically receives the same update approvals as Server1.What should you do?（）AOn Server2, modify the Update Source and Proxy Server settings. BOn Server2, modify the Update Files and Languages settings. COn Server2, run the Windows Server Update Services 3.0 setup wizard. DOn Server1, run the WSUS Server Configuration Wizard.
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). You have two servers named Server1 and Server2. Both servers have Windows Server Update Services (WSUS) 3.0 installed. You need to configure WSUS so that Server2 uses Server1 as the upstream server. What should you do on Server2?（）AFrom the command prompt， run wuauclt.exe.BFrom the command prompt， run wsusutil.exe.CFrom the Update Services console， run the WSUS Server Configuration Wizard.DFrom the Local Computer Policy， specify the location on the intranet for the Microsoft update service.
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The domain contains a member server named Server1. Server1 is a file server. You accidentally delete the computer account for Server1 from the domain. You need to ensure that users can access the file shares on Server1 by using their domain user accounts. You must achieve this goal by using the minimum amount of administrative effort. What should you do? （）AOn Server1, run the Netdom reset command.BOn Server1, add the computer to a workgroup and then add the computer to the domain. Restart Server1.CFrom Active Directory Users and Computers, create a new computer account named Server1 in the domain. Restart Server1.DOn a domain controller, perform an authoritative restore in Active Directory for the Server1 computer account. Restart Server1.
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 （SP2）. The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125.You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100.You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200.You need to ensure that Printer1’s IP address always remains the same. What should you create on Server2？（）Aan exclusion rangeBa reservationCa superscopeDa user class
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The domain contains a member server named Server1. Server1 is a file server. You accidentally delete the computer account for Server1 from the domain. You need to ensure that users can access the file shares on Server1 by using their domain user accounts. You must achieve this goal by using the minimum amount of administrative effort. What should you do? （）AOn Server1, run the Netdom reset command.BOn Server1, add the computer to a workgroup and then add the computer to the domain. Restart Server1.CFrom Active Directory Users and Computers, create a new computer account named Server1 in the domain. Restart Server1.DOn a domain controller, perform an authoritative restore in Active Directory for the Server1 computer account. Restart Server1.
单选题Your network consists of a single Active Directory domain. The network contains two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 （SP2）.You log on to Server1 by using the Administrator account for the domain. You open Event Viewer and attempt to connect to Server2 but receive the following error message.You verify that you can connect to Server2 by using Windows Explorer and that Windows Firewall is disabled on Server2. You open the Services snap-in on Server2 as shown in the exhibit.You need to ensure that you can connect to Server2 remotely by using Event Viewer. What should you do on Server2？（）AAdd the Administrator account to the HelpServicesGroup.BSet the Startup Type for the Remote Registry service to Automatic and then start the service.CSet the Startup Type for the Secondary Logon service to Disabled and then stop the service.DSet the Startup Type for the Special Administration Console Helper service to Automatic and then start the service.