单选题What is the proper command to create a DHCP address pool?（）Aip local-poolBip local poolCip dhcp local poolDip dhcp-local pool
单选题
What is the proper command to create a DHCP address pool?（）
A
ip local-pool
B
ip local pool
C
ip dhcp local pool
D
ip dhcp-local pool
参考解析
解析：
暂无解析
相关考题：
在路由器上建立一个名为test的DHCP地址池，并为其分配IP地址202.112.7.0、24，子网地址中的202.112.7.2～202.112.7.10作为静态地址分配，正确的DHCP配置是A．Router(config)#ip dhcp pool test Router(config)#ip dhcp excluded-address 202.112.7.2-10 Router(dhcp-config)#network 202.112.7.0 255.255.255.0B．Router(config)#ip dhcp excluded-address 202.112.7.2-10 Router(config)#ip dhcp pool test Router(dhcp-config)#network 202.112.7.0/24C．Router(config)#ip dhcp excluded-address 202.112.7.2-10 Router(config)#ip dhcp pool test Router(dhcp-config)#network 202.112.7.0 0.0.0.255D．Router(config)#ip dhcp excluded-address 202.112.7.2-10 Router(config)#ip dhcp pool test Router(dhcp-config)#network 202.112.7.0 255.255.255.0
在路由器上建立一个名为test的DHCP地址池，并为其分配IP地址202.112.7.0/24，子网地址中的202.112.7.2～202.112.7.10作为静态地址分配，正确的DHCP配置是______。A．Router(config) #ip dhcp pool test Router(config) #ip dhcp excluded-address 202.112.7.2-10 Router(dhcp-config) #network 202.112.7.0-255.255.255.0B．Router(config) #ip dhcp excluded-address 202.112.7.2-202.112.7.10 Router(config) #ip dhcp pool test Router(dhcp-config) #network 202.112.7.0/24C．Router(config) #ip dhcp excludeaddress 202.112.7.2-202.112.7.10 Router(config) #ip dhcp pool test Router(dhcp-config) #network 202.112.7.0-0.0.0.255D．Router(config) #ip dhcp excluded-address 202.112.7.2-202.112.7.10 Router(config) #ip dhcp pool test Router(dhcp-config) #network 202.112.7.0-255.255.255.0
What is the proper command to create a DHCP address pool?() A.ip local-poolB.ip local poolC.ip dhcp local poolD.ip dhcp-local pool
What is true about the functions provided by a DHCP Relay Proxy over the DHCP Relay agent?() A. Monitors and manages leases.B. Creates host route dynamically after address assignment.C. Provides an IP address from a pool.D. Must be on same subnet as DHCP server
Which command is used to display a address pool for a DHCP Local Server?() A. show ip local poolB. show ip dhcp local poolC. show ip dhcp-local poolD. show ip pool
Refer to the exhibit. A network administrator has configured DHCP services on the router asshown. DHCP clients connected to the FastEthernet0/0 interface are working properly. DHCP clients connected to the FastEthernet0/1 interface are not receiving addresses.Which two statements contain recommendations that will solve the problem?（）A.The network shown in the output under the ip dhcp pool Central command should be changed to network 10.10.0.0 with a mask of 255.255.255.0B.A second DHCP pool for network 10 .10.0.0/24 should be configuredC.An ip dhcp excluded - address global configuration command for network 10.10.0.0/24 should be issuedD.The ip helper -address 10.0.0.1 command should be issued so that the address can be added to the Fast Ethernet0/0 c onfigurationE.The ip helper -address 10.0.0.1 command should be issued so that the address can be added to the Fast Ethernet0/1 configuration
Refer to the exhibit. Which statement is true about the configuration?() A. Hosts belonging to DHCP pool 1 and pool 2 will retain their IP settings for 30 hours before they must renew.B. Hosts will receive IP settings from pool 1 until the addresses run out, and then hosts will receive the settings from pool 2.C. Hosts in the 10.10.20.0/24 subnet will u se 10.10.20.50 as its DNS server.D. DHCP pool 0 needs to have the ip dhcp excluded - address command to exclude the default router and DNS servers.
In a Bridged 1483 service offering， how does an end user’s workstation dynamically obtain an IP address？ （）A、RADIUS serverB、external DHCP serverC、address pool on the DSL modemD、address pool on the provider router
What is the function of the Cisco IOS command ip nat inside source static 10.1.1.5 172.35.16.5（）。A、It creates a global address pool for all outside NAT transactionsB、It establishes a dynamic address pool for an inside static addressC、It creates dynamic source translations for all inside local PAT transactionsD、It creates a one-to-one mapping between an inside local address and an inside global addressE、It maps one inside source address to a range of outside global addresses
Which statement is correct regarding the operation of DHCP?（）A、A DHCP client uses a ping to detect address conflicts.(ARP)B、A DHCP server uses a gratuitous ARP to detect DHCP clients.C、A DHCP client uses a gratuitous ARP to detect a DHCP server.D、If an address conflict is detected, the address is removed from the pool and an administrator must resolve the conflict.E、If an address conflict is detected, the address removed from the pool for an amount of time configurable by the administrator.F、If an address conflict is detected, the address is removed from the pool and will not be reused until server is rebooted.
What is the function of the Cisco IOS command ip nat inside source static 10.1.1.5 172.35.16.5？（）A、It creates a global address pool for all outside NAT transactions.B、It establishes a dynamic address pool for an inside static address.C、It creates dynamic source translations for all inside local PAT transactions.D、It creates a one-to-one mapping between an inside local address and an inside global address.E、It maps one inside source address to a range of outside global addresses.
You have a DHCP server named Server1 and an application server named Server2. Both servers run Windows Server 2008. The DHCP server contains one scope. you need to ensure that server2 alwaysreceives the same IP address. Server2 must receive its DNS settings and its Wins settings from DHCP. What should you do？（）A、Create a multicast scopeB、Assign a Static IP address to Server2C、Create an exclusion range in the DHCP scopeD、Create a DHCP reservation in the DHCP scope.
You have a DHCP server named Server1 and an application server named Server2. Both servers run Windows Server 2008 R2. The DHCP server contains one scope.You need to ensure that Server2 always receives the same IP address. Server2 must receive its DNS settings and its WINS settings from DHCP.What should you do？（）A、Create a multicast scope.B、Assign a static IP address to Server2.C、Create an exclusion range in the DHCP scope.D、Create a DHCP reservation in the DHCP scope.
Refer to the exhibit. Which rule does the DHCP server use when there is an IP address conflict?（）A、The address is removed from the pool until the conflict is resolved.B、The address remains in the pool until the conflict is resolved.C、Only the IP detected by Gratuitous ARP is removed from the pool.D、Only the IP detected by Ping is removed from the pool.E、The IP will be shown, even after the conflict is resolved.
Which command is used to display a address pool for a DHCP Local Server?（）A、show ip local poolB、show ip dhcp local poolC、show ip dhcp-local poolD、show ip pool
you have a DHCP server named server1 and an application server named server2. Both servers run windows server 2008. The DHCP server contains one scope. You need to ensure that server2 always receives the same ip address. Server2 must receive its DNS settings and its wins settings from DHCP. What should you do?（）A、Create a multicast scope.B、Assign a static ip address to server2.C、Create an exclusion range in the DHCP scope.D、Create a DHCP reservation in the DHCP scope.
You are designing the IP address assignment strategy for the VPN users. Which two actions should you perform.（）A、 Configure VPN1 as a DHCP Relay Agent.B、 Configure VPN1 to assign IP Address by using DHCP server.C、 Configure VPN1 to have a static pool of IP Address from the network address of 131.107.1.0/24.D、 Configure VPN1 to have a static pool of IP Address from the network address of 192.168.1.0/24.E、 Configure the perimeter firewall to allow inbound DHCP traffic to be passed to VPN1.F、 Configure the interval firewall to allow DHCP broadcasts to be forwarded from the external network to the internal network.
单选题What is the function of the Cisco IOS command ip nat inside source static 10.1.1.5 172.35.16.5？（）AIt creates a global address pool for all outside NAT transactions.BIt establishes a dynamic address pool for an inside static address.CIt creates dynamic source translations for all inside local PAT transactions.DIt creates a one-to-one mapping between an inside local address and an inside global address.EIt maps one inside source address to a range of outside global addresses.
单选题What is the proper command to create a DHCP address pool?（）Aip local-poolBip local poolCip dhcp local poolDip dhcp-local pool
单选题What is the function of the Cisco IOS command ip nat inside source static 10.1.1.5 172.35.16.5（）。AIt creates a global address pool for all outside NAT transactionsBIt establishes a dynamic address pool for an inside static addressCIt creates dynamic source translations for all inside local PAT transactionsDIt creates a one-to-one mapping between an inside local address and an inside global addressEIt maps one inside source address to a range of outside global addresses
单选题What is true about the functions provided by a DHCP Relay Proxy over the DHCP Relay agent?（）AMonitors and manages leases.BCreates host route dynamically after address assignment.CProvides an IP address from a pool.DMust be on same subnet as DHCP server
单选题What is the proper procedure to recover a lost tempfile?（）ARestore the backup copy of the tempfile from the backup media. BRe-create the tempfile with the create tempfile command. CCopy an existing tempfile from another database. DRe-create the tempfile with the create tablespace command. ERe-create the tempfile with the alter tablespace command.
单选题In JUNOS software, what is the purpose of the eui-64 command?（）AAutomatically create the IS-IS NET id.BDynamically create an OSPFV3 router idCAutomatically assign the host portion of an ipv6 address.DDynamically assign amac address to an ethernet interface.
单选题Which statement is correct regarding the operation of DHCP?（）AA DHCP client uses a ping to detect address conflicts.BA DHCP server uses a gratuitous ARP to detect DHCP clients.CA DHCP client uses a gratuitous ARP to detect a DHCP server.DIf an address conflict is detected, the address is removed from the pool and an administrator must resolve the conflict.EIf an address conflict is detected, the address removed from the pool for an amount of time configurable by the administrator.FIf an address conflict is detected, the address is removed from the pool and will not be reused until server is rebooted.
单选题Refer to the exhibit. Given the DHCP pool configuration shown on Router A, the Cisco IP phone will not boot up in the Teleworker location. What is missing from the Teleworker DHCP pool configuration?（）A The DHCP pool needs to have an import all statement. B The DHCP pool is missing an option 150 ip 10.59.138.1 statement.C The DHCP pool is missing an option 139 ip 10.59.138.1 statementD The DHCP pool is missing a dns-server 10.59.138.1 statement.
单选题In JUNOS software， what is the purpose of the eui-64 command？（）AAutomatically create the IS-IS NET IDBDynamically create an MPLS router IDCAutomatically assign the host number of an IPv6 address.DDynamically assign a MAC address to an Ethernet interface.
单选题In what situation would the command ip helper-address be required？（Choose the best answer.）（）AOnly when there is a duplicate IP address caused by a combination of static and dynamic IPaddress allocationsBOn each router that exists between the client and the serverCOnly when a router separates the client from the serverDOnly if the DHCP sever issues a DHCPNAK to the initial requestEOnly when the client is on the same subnet as the serverFOnly when the DHCP pool is out of IP addresses
单选题What is the proper procedure to recover a lost tempfile？（）A Restore the backup copy of the tempfile from the backup media.B Re-create the tempfile with the create tempfile command.C Copy an existing tempfile from another database.D Re-create the tempfile with the create tablespace command.E Re-create the tempfile with the alter tablespace command.