多选题The command output that follows was gathered from router R1. If correctly referenced by an EIGRP distribution list that filters outbound Updates, which of the following statements is true about the filtering of various prefixes by this Prefix list?（） R1#sh ip prefix - list ip prefix - list question: 4 entries seq 5 deny 10.1.2.0/24 ge 25 le 27 seq 15 deny 10.2.0.0/16 ge 30 le 30 se q 20 permit 0.0.0.0/0APrefix 10.1.2.0/24 will be filtered due to clause 5BPrefix 10.1.2.224/26 will be filtered due to clause 5CPrefix 10.2.2.4/30 will be filtered due to clause 15DPrefix 10.0.0.0/8 will be permitteDEPrefix 0.0.0.0/ 0 will be permitteD
多选题
The command output that follows was gathered from router R1. If correctly referenced by an EIGRP distribution list that filters outbound Updates, which of the following statements is true about the filtering of various prefixes by this Prefix list?（） R1#sh ip prefix - list ip prefix - list question: 4 entries seq 5 deny 10.1.2.0/24 ge 25 le 27 seq 15 deny 10.2.0.0/16 ge 30 le 30 se q 20 permit 0.0.0.0/0
A
Prefix 10.1.2.0/24 will be filtered due to clause 5
B
Prefix 10.1.2.224/26 will be filtered due to clause 5
C
Prefix 10.2.2.4/30 will be filtered due to clause 15
D
Prefix 10.0.0.0/8 will be permitteD
E
Prefix 0.0.0.0/ 0 will be permitteD
参考解析
解析：
暂无解析
相关考题：
Which of the following three BGP filtering methods enabled with the neighbor command will filter BGP prefixes based on the prefix and prefix length?() A. A neighbor distribute - list out command, referencing a standard ACLB. A neighbor prefix - list out commandC. A neighbor filter - list out commandD. A neighbor distribute - list out command, referencing an extended ACLE. A neighbor route - map out command
R1 is currently advertising prefixes 1.0.0.0/8, 2.0.0.0/8, and 3.0.0.0/8 over its eBGP connection to neighbor 2.2.2.2 (R2). An engineer configures a prefix list (fred) on R1 that permits only 2.0.0.0/8 and then enables the filter with the neighbor R2 prefix- list fred out command. Upon exiting configuration mode, the engineer uses some show commands on R1, but no other commands.Which of the following is true in this case?（）A. The show ip bgp neighbor 2 .2.2.2 received -routes command lists the three original prefixes.B. The show ip bgp neighbor 2.2.2.2 advertised - routes command lists the three original prefixes.C. The show ip bgp neighbor 2.2.2.2 routes command lists the three original prefixes.D. T he show ip bgp neighbor 2.2.2.2 routes command lists only 2.0.0.0/8.E. The show ip bgp neighbor 2.2.2.2 advertised - routes command lists only 2.0.0.0/8.
Which of the following answers is most true about the BGP Update message?() A. It lists a set of path attributes, along with a list of prefixes that use those PAsB. It lists a prefix/length, plus the PA settings for that prefixC. It lists withdrawn routes, but never in the same Update message as newly advertised routesD. A single Update message lists at most a single prefix/lengtH
On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）A. show ip routeB. show ip eigrp topologyC. show ip ospf topologyD. show ip eigrp topology 10.1.1.0/24
Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（）External data:Originating router is 10.1.1.1AS number of route is 1External protocol is OSPF, external metric is 64Administrator tag is 0 (0x00000000)A. R1 is the router that redistributed the routeB. R1‘s metric to reach subnet 10.2.2.0/24 is 64C. The route was redistributed on a router that has a router ospf 1 command configuredD. R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF
The following command output was gathered from Router R1, an ABR between areas 0 (backbone) and area 1. In this internetwork, area 0 contains all the subnets of cla ss A network 10.0.0.0. R1‘s OSPF process has a distribute - list prefix question in command configured. Assuming the subnets listed in the answers actually exist in area 0.Which of the following occurs on router R1?（）R1sh ip prefix - listip prefix - list question: 4 entriesseq 5 deny 10.1.2.0/24 ge 25 le 27seq 15 deny 10.2.0.0/16 ge 30 le 30seq 20 permit 0.0.0.0/0 le 32A. R1 will not create/flood a type 3 LSA for subnet 10.1.2.0/26 into area 1B. R1 will not create/flood a Type 3 LSA for subnet 1 0.1.2.0/24 into area 1C. R1 will not have an OSPF route for subnet 10.1.2.0/26 in its IP routing tablED. R1 will not have an OSPF route for subnet 10.1.2.0/24 in its IP routing tablE
R1 has correctly configured EIGRP to filter routes using a route map named question. The configuration that follows shows the entire route map and related configuration. Which of the following is true regarding the filtering action on prefix 10.10.10.0/24 in this case?（）route - map question deny 10match ip address 1route - map question permit 20match ip address prefix- list fred!access - list 1 deny 10.10.10.0 0.0.0.255ip prefix - list fred permit 10.10.10.0/23 le 25A. It will be filtered due to the deny action in route map clause 10B. It will be allowed because of the double negative (two deny references) in clause 10C. It will be permitted due to matching clause 20‘s reference to prefix - list freDD. It will be filtered due to matching the implied deny all route map clause at the end of the route map
The command output that follows was gathered from router R1. If correctly referenced by an EIGRP distribution list that filters outbound Updates, which of the following statements is true about the filtering of various prefixes by this Prefix list?（）R1sh ip prefix - listip prefix - list question: 4 entriesseq 5 deny 10.1.2.0/24 ge 25 le 27seq 15 deny 10.2.0.0/16 ge 30 le 30se q 20 permit 0.0.0.0/0A. Prefix 10.1.2.0/24 will be filtered due to clause 5B. Prefix 10.1.2.224/26 will be filtered due to clause 5C. Prefix 10.2.2.4/30 will be filtered due to clause 15D. Prefix 10.0.0.0/8 will be permitteDE. Prefix 0.0.0.0/ 0 will be permitteD
Router R1 has been configured for EIGRP. The configuratio n also includes an ACL with one line -access - list 1 permit 10.100.32.0 0.0.15.255 - and the EIGRP configuration includes the distribute -list 1 in command.Which of the following routes could not be displayed in the output of the show ip eigrp topology comm and as a result?（）A. 10.10.32.0/19B. 10.10.44.0/22C. 10.10.40.96/27D. 10.10.48.0/23E. 10.10.60.0/30
Refer to the exhibit. Routers R1 and R2 have established a neighbor relationship and are exchanging routing information. The network design requires that R1 r eceive routing updates from R2, but not advertise any routes to R2. Which configuration command sequence will successfully accomplish this task? （）A. R1(config)# router eigrp 1 R1(config - router)# passive - interface serial 0B. R1(config)# access - list 2 0 deny any R1(config)# router eigrp 1 R1(config - router)# distribute - list 20 out serial 0C. R2(config)# access - list 20 permit any R2(config)# router eigrp 1 R2(config - router)# distribute - list 20 in serial 0D. R1(config)# access - list 20 permit any R 1(config)# router eigrp 1 R1(config - router)# distribute - list 20 in serial 0E. R2(config)# access - list 20 deny any R2(config)# router eigrp 1 R2(config - router)# distribute - list 20 out serial 0F. R2(config)# router eigrp 1 R2(config - router)# passive - interface serial 0
Refer to the exhibit. ROUTE Enterprises has many stub networks in their enterprise network, such as router B and its associated network. EIGRP is to be implemented on router A so that neither the prefix for the S/0/0/0 interface nor the prefixes from router B appear in the routing tables for the router in the enterprise network. Which action will accomplish this goal?（）A. Declare router B a stub router using the eigrp stub command.B. Use the passive - interface command for interface Serial0/0/0.C. Use a mask with the network command to exclude interface Serial0/0/0.D. Implement a distribute list to exclude the link prefix from the routi ng updates.
Refer to the exhibit. Routers R1 and R2 are running EIGRP and have converged. On the basis of the information that is presented, which statement is true? () A. Both outgoing and incoming routing updates on R1 will be permitted because the d istribute - list 20 out Serial0/0 command cannot be used with association with the outgoing interface.B. All incoming routing updates from R2 will be suppressed, but the outgoing updates will continue to be sent.C. Both outgoing and incoming routing up dates on R1 will be stopped because of the passive - interface Serial0/0 configuration statement.D. All outgoing routing updates from router R1 to router R2 will be suppressed, but the inbound updates will continue to be received.
Based on the exhibited output, which three statements are true?() A. The route to 10.2.0.0/16 was redistributed into EIGRP.B. A default route has been redistributed into the EIGRP autonomous system.C. R1 is configured with the ip summary - address command.D. R1 is sourcing a n external EIGRP route from Null0.E. The router at 10.1.1.2 is configured with the ip default - network 0.0.0.0 command.F. R1 is configured with the variance command.
Which of the following answers is most true about the BGP Update message?（）A、It lists a set of path attributes, along with a list of prefixes that use those PAsB、It lists a prefix/length, plus the PA settings for that prefixC、It lists withdrawn routes, but never in the same Update message as newly advertised routesD、A single Update message lists at most a single prefix/lengtH
Which of the following access list statements would deny traffic from a specifichost?（）A、Router(config)# access-list 1 deny 172.31.212.74 anyB、Router(config)# access-list 1 deny 10.6.111.48 hostC、Router(config)# access-list 1 deny 172.16.4.13 0.0.0.0D、Router(config)# access-list 1 deny 192.168.14.132 255.255.255.0E、Router(config)# access-list 1 deny 192.168.166.127 255.255.255.255
On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）A、show ip routeB、show ip eigrp topologyC、show ip ospf topologyD、show ip eigrp topology 10.1.1.0/24
Which of the following three BGP filtering methods enabled with the neighbor command will filter BGP prefixes based on the prefix and prefix length？（）A、A neighbor distribute - list out command, referencing a standard ACLB、A neighbor prefix - list out commandC、A neighbor filter - list out commandD、A neighbor distribute - list out command, referencing an extended ACLE、A neighbor route - map out command
What is a route filter?（）A、a list of prefixes that can be configured in a poilcyB、a single prefix that is configured separately and be referenced in a policyC、a list of prefixes that is configured separately and can be referenced in a policyD、a single prefix that can be configured within a policy
R1 is currently advertising prefixes 1.0.0.0/8, 2.0.0.0/8, and 3.0.0.0/8 over its eBGP connection to neighbor 2.2.2.2 (R2). An engineer configures a prefix list (fred) on R1 that permits only 2.0.0.0/8 and then enables the filter with the neighbor R2 prefix- list fred out command. Upon exiting configuration mode, the engineer uses some show commands on R1, but no other commands. Which of the following is true in this case?（）A、The show ip bgp neighbor 2 .2.2.2 received -routes command lists the three original prefixes.B、The show ip bgp neighbor 2.2.2.2 advertised - routes command lists the three original prefixes.C、The show ip bgp neighbor 2.2.2.2 routes command lists the three original prefixes.D、T he show ip bgp neighbor 2.2.2.2 routes command lists only 2.0.0.0/8.E、The show ip bgp neighbor 2.2.2.2 advertised - routes command lists only 2.0.0.0/8.
What is a route filter?（）A、a list of prefixes that can be configured in a policyB、a single prefix that is configured separately, and can be referenced in a policyC、a list of prefixes that is configured separately and can be referenced in a policyD、a single prefix that can be configured within a policy
多选题On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）Ashow ip routeBshow ip eigrp topologyCshow ip ospf topologyDshow ip eigrp topology 10.1.1.0/24
单选题R1 has correctly configured EIGRP to filter routes using a route map named question. The configuration that follows shows the entire route map and related configuration. Which of the following is true regarding the filtering action on prefix 10.10.10.0/24 in this case?（） route - map question deny 10 match ip address 1 route - map question permit 20 match ip address prefix- list fred ! access - list 1 deny 10.10.10.0 0.0.0.255 ip prefix - list fred permit 10.10.10.0/23 le 25AIt will be filtered due to the deny action in route map clause 10BIt will be allowed because of the double negative (two deny references) in clause 10CIt will be permitted due to matching clause 20's reference to prefix - list freDD It will be filtered due to matching the implied deny all route map clause at the end of the route map
单选题What is a route filter?（）Aa list of prefixes that can be configured in a policyBa single prefix that is configured separately, and can be referenced in a policyCa list of prefixes that is configured separately and can be referenced in a policyDa single prefix that can be configured within a policy
多选题Router R1 has been configured for EIGRP. The configuratio n also includes an ACL with one line -access - list 1 permit 10.100.32.0 0.0.15.255 - and the EIGRP configuration includes the distribute -list 1 in command. Which of the following routes could not be displayed in the output of the show ip eigrp topology comm and as a result?（）A10.10.32.0/19B10.10.44.0/22C10.10.40.96/27D10.10.48.0/23E10.10.60.0/30
多选题The command output that follows was gathered from router R1. If correctly referenced by an EIGRP distribution list that filters outbound Updates, which of the following statements is true about the filtering of various prefixes by this Prefix list?（） R1#sh ip prefix - list ip prefix - list question: 4 entries seq 5 deny 10.1.2.0/24 ge 25 le 27 seq 15 deny 10.2.0.0/16 ge 30 le 30 se q 20 permit 0.0.0.0/0APrefix 10.1.2.0/24 will be filtered due to clause 5BPrefix 10.1.2.224/26 will be filtered due to clause 5CPrefix 10.2.2.4/30 will be filtered due to clause 15DPrefix 10.0.0.0/8 will be permitteDEPrefix 0.0.0.0/ 0 will be permitteD
单选题What is a route filter?（）Aa list of prefixes that can be configured in a poilcyBa single prefix that is configured separately and be referenced in a policyCa list of prefixes that is configured separately and can be referenced in a policyDa single prefix that can be configured within a policy
单选题The following command output was gathered from Router R1, an ABR between areas 0 (backbone) and area 1. In this internetwork, area 0 contains all the subnets of cla ss A network 10.0.0.0. R1's OSPF process has a distribute - list prefix question in command configured. Assuming the subnets listed in the answers actually exist in area 0. Which of the following occurs on router R1?（） R1#sh ip prefix - list ip prefix - list question: 4 entries seq 5 deny 10.1.2.0/24 ge 25 le 27 seq 15 deny 10.2.0.0/16 ge 30 le 30 seq 20 permit 0.0.0.0/0 le 32AR1 will not create/flood a type 3 LSA for subnet 10.1.2.0/26 into area 1BR1 will not create/flood a Type 3 LSA for subnet 1 0.1.2.0/24 into area 1CR1 will not have an OSPF route for subnet 10.1.2.0/26 in its IP routing tablEDR1 will not have an OSPF route for subnet 10.1.2.0/24 in its IP routing tablE
多选题Which of the following three BGP filtering methods enabled with the neighbor command will filter BGP prefixes based on the prefix and prefix length？（）AA neighbor distribute - list out command, referencing a standard ACLBA neighbor prefix - list out commandCA neighbor filter - list out commandDA neighbor distribute - list out command, referencing an extended ACLEA neighbor route - map out command