You are the network consultant from Cisco.com. Please point out two statements correctly describe an IPS device() A. It resembles a Layer 2 bridge.B. Traffic flow through the IPS resembles traffic flow through a Layer 3 router.C. Inline interfaces which have no IP addresses cannot be detected.D. Malicious packets that have been detected are allowed to pass through, but all subsequent traffic is blocked.
You are the network consultant from Cisco.com. Please point out two statements correctly describe an IPS device()
A. It resembles a Layer 2 bridge.
B. Traffic flow through the IPS resembles traffic flow through a Layer 3 router.
C. Inline interfaces which have no IP addresses cannot be detected.
D. Malicious packets that have been detected are allowed to pass through, but all subsequent traffic is blocked.
相关考题：
Which two of these are characteristics of an IPS device?() A. passively listens to network trafficB. is an active device in the traffic pathC. has a permissive interface that is used to monitor networksD. traffic arrives on one IPS interface and exits on another
You are the network consultant from Cisco.com. Please point out the reason that STP required when VLANs do not span access layer switches.() A. ensure a loop-free topologyB. protect against user-side loopsC. support business applicationsD. risk of lost connectivity without STP
You are the network consultant from Cisco.com. Please point out which Layer 2 access designs does not support VLAN extensions?() A. Flex LinksB. loop-free UC. looped squareD. looped triangle
Refer to the exhibit. Which three statements correctly describe Network Device A?() A.With a network wide mask of 255.255.255.128, each interface does not require an IP address.B.With a network wide mask of 255.255.255.128, each interface does require an IP address on a unique IP subnet.C.With a network wide mask of 255.255.255.0, must be a Layer 2 device for the PCs to communicate with each other.D.With a network wide mask of 255.255.255.0, must be a Layer 3 device for the PCs to communicate with each other.E.With a network wide mask of 255.255.254.0, each interface does not require an IP address.
You are the Cisco Network Designer in Cisco.com. Which of these statements is true of clientless end-user devices?（）A、They do not receive unique IP addresses.B、RADIUS or LDAP is required.C、They are assigned addresses from the internal DHCP pool.D、Their traffic appears to originate from the originating host network.
Which two of these are characteristics of an IPS device？（）A、 passively listens to network trafficB、 is an active device in the traffic pathC、 has a permissive interface that is used to monitor networksD、 traffic arrives on one IPS interface and exits on another
You are the network consultant from passguide.com. You have been asked for which two features of optical networks allow data to be transmitted over extremely long distances? （）A、EncryptionB、Bandwidth limitsC、Minimal signal lossD、No EMI
Which two statements about configuration an unconnected Catalyst Express 500 switch from setup mode using a PC are true？（）A、You may use Cisco Network Assistant to set up the initial configurationB、You must use CLI for initial configurationC、You may use either CLI or CAN for configurationD、You may make a direct connection to the PC from any point on the switchE、You may only make a direct connection from the port with the flashing green LED to the PC
You are the network consultant from passguide.com. Could you please tell customers what strategy will protect network resources and services from unauthorized actions?（）A、Content storage networkingB、Network optimizationC、Network managementD、Network security
You are the network consultant from Cisco.com. Please point out two statements correctly describe an IPS device（）A、It resembles a Layer 2 bridge.B、Traffic flow through the IPS resembles traffic flow through a Layer 3 router.C、Inline interfaces which have no IP addresses cannot be detected.D、Malicious packets that have been detected are allowed to pass through, but all subsequent traffic is blocked.
Which two statements describe the functions and operations of IDS and IPS systems？（）A、A network administrator entering a wrong password would generate a true-negative alarm.B、A false positive alarm is generated when an IDS/IPS signature is correctly identified.C、An IDS is significantly more advanced over IPS because of its ability to prevent network attacks.D、Cisco IDS works inline and stops attacks before they enter the network.E、Cisco IPS taps the network traffic and responds after an attack.F、Profile-based intrusion detection is also known as "anomaly detection".
In which two locations in an enterprise network can an IPS sensor be placed？ （）A、 bridging VLANs on two switchesB、 bridging two VLANs on one switchC、 between two Layer 2 devices with trunkingD、 between two Layer 2 devices without trunkingE、 between a Layer 2 device and a Layer 3 device with trunking
You are the network consultant from Cisco.com. Please point out which Layer 2 access designs does not support VLAN extensions?（）A、Flex LinksB、loop-free UC、looped squareD、looped triangle
The Lightweight Access Point Protocol （LWAPP） is in use within the Company wireless network. Which two statements correctly describe features of this protocol？ （）A、 Control traffic between an access point and a controller is encrypted within LWAPP.B、 Data traffic between an access point and a controller is encrypted within LWAPP.C、 Layer 3 mode packets are transmitted in TCP frames.D、 Data traffic between an access point and a controller is encapsulated within LWAPP.E、 VLAN tagging and QoS markings are applied at the access point.
You have a computer that runs Windows XP Professional. The computer has an 802. 11g wireless network card. You have a wireless access point that is secured by using WiFi Protected Access (WPA). The service set identifier (SSID) of the wireless access point does not broadcast. You need to establish a wireless connection to the wireless access point. What should you do?（） A、From the Device Manager, open the wireless network adapter properties and click Advanced. B、From the Device Manager, right-click the wireless network adapter and click Scan for hardware changes. C、From the Wireless Network Connection Properties, select View Wireless Networks. D、From the Wireless Network Connection Properties, click Change Advanced Settings. From the Wireless Networks tab, select Add a preferred network.
Your network contains a wireless access point. You have a computer that runs Windows 7. The computerconnects to the wireless access point. You disable Service Set Identifier (SSID) broadcasts on the wirelessaccess point. You discover that you are now unable to connect to the wireless access point from theWindows 7 computer. You need to ensure that the computer can connect to the wireless access point. What should you do?（）A、From Credential Manager， modify the generic credentials.B、From Credential Manager， modify the Windows credentials.C、From Network and Sharing Center， turn on Network discovery.D、From Network and Sharing Center， modify the wireless network connection settings.
多选题The Lightweight Access Point Protocol （LWAPP） is in use within the Company wireless network. Which two statements correctly describe features of this protocol？ （）AControl traffic between an access point and a controller is encrypted within LWAPP.BData traffic between an access point and a controller is encrypted within LWAPP.CLayer 3 mode packets are transmitted in TCP frames.DData traffic between an access point and a controller is encapsulated within LWAPP.EVLAN tagging and QoS markings are applied at the access point.
多选题Refer to the exhibit. Which three statements correctly describe Network Device A?（）AWith a network wide mask of 255.255.255.128, each interface does not require an IP address.BWith a network wide mask of 255.255.255.128, each interface does require an IP address on a unique IP subnet.CWith a network wide mask of 255.255.255.0, must be a Layer 2 device for the PCs to communicate with each other.DWith a network wide mask of 255.255.255.0, must be a Layer 3 device for the PCs to communicate with each other.EWith a network wide mask of 255.255.254.0, each interface does not require an IP address.
单选题You are the network consultant from Cisco.com. Please point out the reason that STP required when VLANs do not span access layer switches.（）Aensure a loop-free topologyBprotect against user-side loopsCsupport business applicationsDrisk of lost connectivity without STP
多选题You are the network consultant from passguide.com. You should tell your clients Two technologies help them save much time from complex computing. （）AVPNBInfiniBandCSCSI over IPDRemote Direct Memory Access
单选题You are the network consultant from passguide.com. Could you please tell customers what strategy will protect network resources and services from unauthorized actions?（）ANetwork managementBNetwork optimizationCNetwork securityDContent storage networking
多选题In which two locations in an enterprise network can an IPS sensor be placed?（）Abridging VLANs on two switchesBbridging two VLANs on one switchCbetween two Layer 2 devices withtrunkingDbetween two Layer 2 devices withouttrunkingEbetween a Layer 2 device and a Layer 3 device withtrunking
多选题In which two locations in an enterprise network can an IPS sensor be placed？（）Abridging VLANs on two switchesBbridging two VLANs on one switchCbetween two Layer 2 devices with trunkingDbetween two Layer 2 devices without trunkingEbetween a Layer 2 device and a Layer 3 device with trunking
多选题Which two of these are characteristics of an IPS device?（）Apassively listens to network trafficBis an active device in the traffic pathChas a permissive interface that is used to monitor networksDtraffic arrives on one IPS interface and exits on another
单选题You have a computer that runs Windows XP Professional. The computer has an 802. 11g wireless network card. You have a wireless access point that is secured by using WiFi Protected Access (WPA). The service set identifier (SSID) of the wireless access point does not broadcast. You need to establish a wireless connection to the wireless access point. What should you do?（）AFrom the Device Manager, open the wireless network adapter properties and click Advanced. BFrom the Device Manager, right-click the wireless network adapter and click Scan for hardware changes. CFrom the Wireless Network Connection Properties, select View Wireless Networks. DFrom the Wireless Network Connection Properties, click Change Advanced Settings. From the Wireless Networks tab, select Add a preferred network.
单选题You are the Cisco Network Designer in Cisco.com. Which of these statements is true of clientlessend-user devices？（）A They do not receive unique IP addresses.B RADIUS or LDAP is required.C They are assigned addresses from the internal DHCP pool.D Their traffic appears to originate from the originating host network.
多选题You are the network consultant from passguide.com. You have been asked for which two features of optical networks allow data to be transmitted over extremely long distances? （）AEncryptionBBandwidth limitsCMinimal signal lossDNo EMI
单选题You are the Cisco Network Designer in Cisco.com. Which of these statements is true of clientless end-user devices?（）AThey do not receive unique IP addresses.BRADIUS or LDAP is required.CThey are assigned addresses from the internal DHCP pool.DTheir traffic appears to originate from the originating host network.