Which two statements correctly identify considerations to take into account when deciding on Campus QoS Design elements?() A. Voice needs to be assigned to the hardware priority queue.B. Voice needs to be assigned to the software priority queue.C. Call signaling must have guaranteed bandwidth service.D. Strict-priority queuing should be limited to 50 percent of the capacity of the link.E. At least 33 percent of the link bandwidth should be reserved for default best-effort class.
Which two statements correctly identify considerations to take into account when deciding on Campus QoS Design elements?()
A. Voice needs to be assigned to the hardware priority queue.
B. Voice needs to be assigned to the software priority queue.
C. Call signaling must have guaranteed bandwidth service.
D. Strict-priority queuing should be limited to 50 percent of the capacity of the link.
E. At least 33 percent of the link bandwidth should be reserved for default best-effort class.
相关考题：
Before deciding which form. of transport to use, a()will take into account the factors of cost, speed and safety. A、consignorB、consigneeC、shipperD、shipowner
When deciding the composition of the engineering watch, which may include____ appropriately, many factors shall be taken into account.A.satisfied engineersB.qualified ratingsC.satisfied chief engineerD.qualified chief' engineer
Which two considerations must you take into account when deploying a Junos Pulse Access Control Service cluster?() A. State synchronization occurs only through the internal network interface card (NIC)B. Latency of the WAN must be less than 300 ms.C. Authenticating endpoints must be on the same LAN segment.D. Cluster members must use the same hardware platfor
Which two statements correctly describe a situation in which an Active／Standby Service Module design is being used?() A. Troubleshooting is more complicated.B. Service and switch modules are underutilized.C. Layer 2 adjacency is required with the servers that use this design.D. Layer 3 adjacency is required with the servers that use this design.E. Load balancing will always occur across both access layer uplinks.
When you decide on Campus QoS Design elements, which two statements correctly identify considerations to be taken into account?() A. Voice needs to be assigned to the hardware priority queue.B. Voice needs to be assigned to the software priority queue.C. Call signaling must have guaranteed bandwidth service.D. Strict-priority queuing should be limited to 50 percent of the capacity of the link.
As a Cisco Network Engineer, you have to master the knowledge of the Cisco validated Design program. Which two of the following descriptions correctly identify its features? （）(Choose two.)A、It strives to protect access to design documentation.B、It facilitates customer deployments that are more predictable.C、It facilitates customer deployments that are less reliable.D、It incorporates products and technologies into a broad portfolio.
Which two statements correctly describe a Cisco WLC configuration of Wireless QoS Profiles Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?（）A、It must always be set on all QoS profile types because this sets the type of markings as either CoS or DSCP.B、It is optional if the Cisco WLC attached switch operates on a trust DSCP model.C、It must be set if the Cisco WLC attached switch operates on a trust CoS model.D、It sets the EDCF queue used for the radio-transmitted frames.
Which of the following statements best describes a Pre-sales Solution Assurance Review？（）A、An account team proposal reviewB、An installation planning meetingC、A solution design development methodologyD、A technical inspection of a completed solution design
Which two statements correctly identify considerations to take into account when deciding on Campus QoS Design elements?（）A、Voice needs to be assigned to the hardware priority queue.B、Voice needs to be assigned to the software priority queue.C、Call signaling must have guaranteed bandwidth service.D、Strict-priority queuing should be limited to 50 percent of the capacity of the link.E、At least 33 percent of the link bandwidth should be reserved for default best-effort class.
Which two statements correctly describe a situation in which an Active/Standby Service Module design is being used?（）A、Troubleshooting is more complicated.B、Service and switch modules are underutilized.C、Layer 2 adjacency is required with the servers that use this design.D、Layer 3 adjacency is required with the servers that use this design.E、Load balancing will always occur across both access layer uplinks.
Which two statements correctly identify factors to consider when Configuring WAN QoS？（）A、Voice Traffic uses Assured ForwardingB、Voice Signaling traffic uses Assured ForwardingC、Voice Signaling traffic uses priority queuingD、Voice Traffic uses priority queuingE、Voice signaling traffic should use priority queuing with Assured Forwarding
You need to determine where the trust boundaries will be in a new Company VOIP design. Which two statements are true about these trust boundaries？（）A、Trust boundaries are configured in the core of the network to provide the most efficient forwarding based upon QoS markings，B、Setting trust boundaries at the edge of the network allows intermediate hop devices to administer QoS policies without detailed packet identification.C、Trust boundaries are used to determine which QoS mechanism will be applied to the traffic. D、At the trust boundaries， the untrusted traffic will be marked with a new QoS value appropriate for the policy in place at the point where the traffic entered the campus network. E、Trust boundaries define the firewall rules for QoS admission into a network.
Which two statements about the QoS functionality of the Cisco SDM are true？（）A、the first step when using the SDM QoS wizard is to select the inbound interface on which the QoS policy must be appliedB、the SDM QoS wizard can be used to optimize LAN， WAN， and VPN interfacesC、he SDM QoS wizard supports network-based application recognition （NBAR） to provide deep and stateful packet inspectionD、he SDM QoS wizard will apply custom queuing and priority queuing policies to the identified interfacesE、he SDM QoS wizard will apply low latency-queuing，custom-queuing and priority-queuing policies to the identified interfacesF、to create and manage the QoS settings， the user must select the QoS wizard task under the Monitor option
which one of the following database elements is not updated when the design task is run?（）A、formsB、viewsC、rolesD、agents
Which two statements are true about record groups?（）A、They are stored in the database. B、They are stored in local Forms memory. C、The type is specified explicitly at design time. D、The type is implied by when and how it is created.
多选题Which two statements correctly identify considerations to take into account when deciding on Campus QoS Design elements?（）AVoice needs to be assigned to the hardware priority queue.BVoice needs to be assigned to the software priority queue.CCall signaling must have guaranteed bandwidth service.DStrict-priority queuing should be limited to 50 percent of the capacity of the link.EAt least 33 percent of the link bandwidth should be reserved for default best-effort class.
多选题Which two statements correctly identify considerations to take into account when deciding onCampus QoS Design elements？ （）AVoice needs to be assigned to the hardware priority queueBVoice needs to be assigned to the software priority queueCCall signaling must have guaranteed bandwidth serviceDStrict-priority queuing should be limited to 50 percent of the capacity of the linkEAt least 33 percent or the link bandwidth should be reserved tor default best effort class
单选题When deciding the composition of the engineering watch, which may include appropriately, many factors shall be taken into account（）.Asatisfied engineersBqualified ratingsCsatisfied chief engineerDqualified chief engineer
多选题Refer to the exhibit. Which three statements are true about trust boundaries in the campus network？ （Choose three.）（）AA device is trusted if it correctly classifies packets.BA device is trusted if it correctly declassifies packets.CThe outermost trusted devices represent the trust boundary.DClassification and marking occur using 802.1ab QoS bits before reaching the trust boundary.ENetwork trust boundaries are automatically configured in IOS version 12.3 and later.FFor scalability， classification should be done as close to the edge as possible.
多选题Which two code fragments correctly create and initialize a static array of int elements？（）AABBCCDD
多选题Which two considerations must you take into account when deploying a Junos Pulse Access Control Service cluster?（）AState synchronization occurs only through the internal network interface card (NIC)BLatency of the WAN must be less than 300 ms.CAuthenticating endpoints must be on the same LAN segment.DCluster members must use the same hardware platfor
多选题Which two statements are true about record groups?（）AThey are stored in the database.BThey are stored in local Forms memory.CThe type is specified explicitly at design time.DThe type is implied by when and how it is created.
多选题Which two statements correctly describe a Cisco WLC configuration of Wireless QoS Profiles Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?（）AIt must always be set on all QoS profile types because this sets the type of markings as either CoS or DSCP.BIt is optional if the Cisco WLC attached switch operates on a trust DSCP model.CIt must be set if the Cisco WLC attached switch operates on a trust CoS model.DIt sets the EDCF queue used for the radio-transmitted frames.
多选题When designing the IP routing for the Enterprise Campus network， which of these following twoiBGB considerations should be taken into account？（）AiBGB dual horning with different iSPs puts the Enterprise at the risk of becoming a transitnetworkBiBGP requires a full mesh of eBGP peersCRouters will not advertise iBGP learned routers to other iBGP peers.DThe use of route reflections or Confederation eliminate any full mesh requirement while helpingto scale iBGPEiGBP peers do not add any information to the AS path
多选题When you decide on Campus QoS Design elements, which two statements correctly identify considerations to be taken into account?（）AVoice needs to be assigned to the hardware priority queue.BVoice needs to be assigned to the software priority queue.CCall signaling must have guaranteed bandwidth service.DStrict-priority queuing should be limited to 50 percent of the capacity of the link.
单选题Which of the following statements best describes a Pre-sales Solution Assurance Review？（）AAn account team proposal reviewBAn installation planning meetingCA solution design development methodologyDA technical inspection of a completed solution design
多选题As a Cisco Network Engineer, you have to master the knowledge of the Cisco validated Design program. Which two of the following descriptions correctly identify its features? （）(Choose two.)AIt strives to protect access to design documentation.BIt facilitates customer deployments that are more predictable.CIt facilitates customer deployments that are less reliable.DIt incorporates products and technologies into a broad portfolio.
多选题Which two statements correctly identify factors to consider when Configuring WAN QoS？（）AVoice Traffic uses Assured ForwardingBVoice Signaling traffic uses Assured ForwardingCVoice Signaling traffic uses priority queuingDVoice Traffic uses priority queuingEVoice signaling traffic should use priority queuing with Assured Forwarding