Which command would correctly configure a serial port on a router with the last usable host address in the 192.216.32.32／29 subnet?() A.Router(config-if)# ip address 192.216.32.38 255.255.255.240B.Router(config-if)# ip address 192.216.32.39 255.255.255.224C.Router(config-if)# ip address 192.216.32.63 255.255.255.248D.Router(config-if)# ip address 192.216.32.39 255.255.255.248E.Router(config-if)# ip address 192.216.32.38 255.255.255.248
Which command would correctly configure a serial port on a router with the last usable host address in the 192.216.32.32／29 subnet?()
A.Router(config-if)# ip address 192.216.32.38 255.255.255.240
B.Router(config-if)# ip address 192.216.32.39 255.255.255.224
C.Router(config-if)# ip address 192.216.32.63 255.255.255.248
D.Router(config-if)# ip address 192.216.32.39 255.255.255.248
E.Router(config-if)# ip address 192.216.32.38 255.255.255.248
相关考题：
Given that you have a class B IP address network range, which of the subnet masks below will allow for 100 subnets with 500 usable host addresses per subnet?A．255.255.0.0B．255.255.224.0C．255.255.254.0D．255.255.255.0E．255.255.255.224
You‘re working at TestKing as a network administrator when your MCSE assistant calls you for help. He has attempted to configure Router TK1 and incorrectly configured the router interface with a subnet broadcast address. You have to correct this by first removing the incorrect IP address and then re-entering the first usable IP address of the same subnet.How will you do this?（）A.B.C.D.E.
After executing the "show host" command, which of the information below would you see?() A. The IP addresses of workstations allowed gain access to the router via an access listB. Permanent name-to-address mappings created using the ip host command.C. Temporary and permanent DNS entries.D. The names of the routers created using the hostname command.E. The length of time of users logged into the router, as well as the duration
Which command will assign the last usable IP address from the 192.168.32.128／28 subnetwork to a router interface?() A. TestKingA(config-if)# ip address 192.168.32.142 255.255.255.240B. TestKingA(config-if)# ip address 192.168.32.143 255.255.255.240C. TestKingA(config-if)# ip address 192.168.32.158 255.255.255.240D. TestKingA(config-if)# ip address 192.168.32.145 255.255.255.240E. TestKingA(config-if)# ip address 192.168.32.144 255.255.255.240
The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?() A. The default administrative distance is used.B. The command is used to establish a static route.C. The command is used to configure the router interfaces.D. The command is used to establish a stub network.E. The subnet mask for the source address is 255.255.255.0
The ip subnet zero command is not configured on a router. What would be the IP address of Ethernet0／0 using the first available address from the sixth subnet of the network 192.168.8.0／29? () A.192.168.8.25B.192.168.8.41C.192.168.8.49D.192.168.8.113
If an Ethernet port on a router was assigned an IP address of 172.1.1.1／20,what is the maximum number of host sallowed on this subnet?() A.4094B.1024C.8190D.2046E.4096
Which command would correctly configure a serial port on a router with the last usable host address in the 192.216.32.32/29 subnet？（）A、Router(config-if)# ip address 192.216.32.38 255.255.255.240B、Router(config-if)# ip address 192.216.32.39 255.255.255.224C、Router(config-if)# ip address 192.216.32.63 255.255.255.248D、Router(config-if)# ip address 192.216.32.39 255.255.255.248E、Router(config-if)# ip address 192.216.32.38 255.255.255.248
You work as a technician at TestKing. You are configuring a Cisco router. You want to configure the IP address on an interface.Which command should you use?（）A、router(config-if)#ip address 142.8.2.1 subnet mask 255.255.252.0B、router(config-if)#142.8.2.1 0.0.3.255C、router(config-if)#ip address 142.8.2.1 255.255.252.0D、router(config-if)#142.8.2.1 subnet mask 255.255.252.0E、router(config-if)#ip address 142.8.2.1 0.0.3.255F、router(config-if)#ip address 142.8.2.1 subnet mask /22
In which of the following scenarios would the "show cdp neighbors detail"command be an appropriate troubleshooting tool?（）A、Two switches are connected via a trunk. Both switches have been assigned an IP address, subnet mask, and default gateway. A ping is successful between the two switches. However, VLAN information is not passed from one switch to the other switch.B、A router and a switch have been assigned an IP address, a subnet mask, and a default gateway. They are directly connected, but a ping between the two devices fails.C、A router connects to another router through a serial interface. Both routers have been assigned an IP address, subnet mask, and default gateway. The routers are running RIP and the networks directly connected to the first router do not pass to the second router. However, a ping from one router to the serial interface of the directly connected neighboring router is successful.D、A router connects to another router via a switch. Both routers and the switch have been assigned an IP address, subnet mask, and default gateway. Neither the routers nor the switch are able to ping one of the hosts that is directly to the switch.
A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?（）A、The default gateway is configured on a different subnet form this host.B、The host is a member of the fifth usable subnet of the 192.168.16.0 network.C、The subnetwork address for this host is 192.168.16.160/28.D、The address of the next higher subnet is 192.168.16.192.E、The address of the router interface that is attached to this subnetwork is 192.168.16.190.F、There are 60 usable host addresses on this subnet.
Given that you have a class B IP address network range, which of the subnet masks below will allow for 100 subnets with 500 usable host addresses per subnet?（）A、255.255.0.0B、255.255.224.0C、255.255.254.0D、255.255.255.0E、255.255.255.224
You are a systems administrator and you are about to assign static IP addresses to various servers on your network. For the network 192.168.20.24/29 the router is assigned to the first usable host address, while the last usable host address goes to your Sales server. Which one of the following commands would you enter into the IP properties box of the sales server?（）A、IP address: 192.168.20.14 Subnet Mask: 255.255.255.248 Default Gateway:192.168.20.9B、IP address: 192.168.20.254 Subnet Mask: 255.255.255.0 Default Gateway:192.168.20.1C、IP address: 192.168.20.30 Subnet Mask 255.255.255.248 Default Gateway:192.168.20.25D、IP address: 192.168.20.30 Subnet Mask 255.255.255.240 Default Gateway:192.168.20.17E、IP address: 192.168.20.30 Subnet Mask 255.255.255.240 Default Gateway:192.168.20.25
The ip subnet zero command is not configured on a router. What would be the IP address of Ethernet0/0 using the first available address from the sixth subnet of the network 192.168.8.0/29? （）A、192.168.8.25B、192.168.8.41C、192.168.8.49D、192.168.8.113
A network administrator must configure 200 switch ports to accept traffic from only the currently attached host devices.What would be the most efficient way to configure MAC-level security on all these ports？ （）A、Visually verify the MAC addresses and then telnet to the switches to enter the switchport-port security mac-address command.B、Have end users e-mail their MAC addresses. Telnet to the switch to enter the switchport-port security mac-address command.C、Use the switchport port-security MAC address sticky command on all the switch ports that have end devices connected to them.D、Use show mac-address-table to determine the addresses that are associated with each port and then enter the commands on each switch for MAC address port-security.
Which command can be a router to verify the layer 3 path to a host?（）A、traceroute addressB、tracert addressC、ssh addressD、telnet address
The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）A、The default administrative distance is used.B、The command is used to establish a static route.C、The command is used to configure the router interfaces.D、The command is used to establish a stub network.E、The subnet mask for the source address is 255.255.255.0
After executing the "show host" command, which of the information below would you see?（）A、The IP addresses of workstations allowed gain access to the router via an access listB、Permanent name-to-address mappings created using the ip host command.C、Temporary and permanent DNS entries.D、The names of the routers created using the hostname command.E、The length of time of users logged into the router, as well as the duration
You would like to configure your PC’s IP address of 10.10.0.156 as an FTP host with au ser name of user anda password of mypass.Which configuration command accomplishes this goal？（）A、host userpc 10.10.0.156 ftp usermypassB、host userpc 10.10.0.156 tftp usermypassC、host nameuserpc 10.10.0.156 ftp usermypassD、host nameuserpc 10.10.0.156 tftp usermypass
单选题Which command would correctly configure a serial port on a router with the last usable host address in the 192.216.32.32/29 subnet？（）ARouter(config-if)# ip address 192.216.32.38 255.255.255.240BRouter(config-if)# ip address 192.216.32.39 255.255.255.224CRouter(config-if)# ip address 192.216.32.63 255.255.255.248DRouter(config-if)# ip address 192.216.32.39 255.255.255.248ERouter(config-if)# ip address 192.216.32.38 255.255.255.248
多选题The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）AThe default administrative distance is used.BThe command is used to establish a static route.CThe command is used to configure the router interfaces.DThe command is used to establish a stub network.EThe subnet mask for the source address is 255.255.255.0
单选题An administrator must assign static IP addresses to the servers in a network.For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address. Which of the following should be entered into the IP propertied box for the sales server?（）AIP address:192.168.20.14 Subnet Mask:255.255.255.248 Default Gateway:192.168.20.9BIP address:192.168.20.254 Subnet Mask:255.255.255.0 Default Gateway:192.168.20.1CIP address:192.168.20.30 Subnet Mask:255.255.255.248 Default Gateway:192.168.20.25DIP address:192.168.20.30 Subnet Mask:255.255.255.240 Default Gateway:192.168.20.17EIP address:192.168.20.30 Subnet Mask:255.255.255.240 Default Gateway:192.168.20.25
单选题If an Ethernet port on a router was assigned an IP address of 172.1.1.1/20，what is the maximum number of host sallowed on this subnet？（）A4094B1024C8190D2046E4096
单选题The ip subnet zero command is not configured on a router. What would be the IP address of Ethernet0/0 using the first available address from the sixth subnet of the network 192.168.8.0/29?（）A192.168.8.25B192.168.8.41C192.168.8.49D192.168.8.113
单选题Which command will assign the last usable IP address from the 192.168.32.128/28 subnetwork to a router interface?（）ATestKingA(config-if)# ip address 192.168.32.142 255.255.255.240BTestKingA(config-if)# ip address 192.168.32.143 255.255.255.240CTestKingA(config-if)# ip address 192.168.32.158 255.255.255.240DTestKingA(config-if)# ip address 192.168.32.145 255.255.255.240ETestKingA(config-if)# ip address 192.168.32.144 255.255.255.240
多选题A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?（）AThe default gateway is configured on a different subnet form this host.BThe host is a member of the fifth usable subnet of the 192.168.16.0 network.CThe subnetwork address for this host is 192.168.16.160/28.DThe address of the next higher subnet is 192.168.16.192.EThe address of the router interface that is attached to this subnetwork is 192.168.16.190.FThere are 60 usable host addresses on this subnet.