You would like to configure your PC’s IP address of 10.10.0.156 as an FTP host with au ser name of user anda password of mypass.Which configuration command accomplishes this goal？（）A、host userpc 10.10.0.156 ftp usermypassB、host userpc 10.10.0.156 tftp usermypassC、host nameuserpc 10.10.0.156 ftp usermypassD、host nameuserpc 10.10.0.156 tftp usermypass
You would like to configure your PC’s IP address of 10.10.0.156 as an FTP host with au ser name of user anda password of mypass.Which configuration command accomplishes this goal？（）
- A、host userpc 10.10.0.156 ftp usermypass
- B、host userpc 10.10.0.156 tftp usermypass
- C、host nameuserpc 10.10.0.156 ftp usermypass
- D、host nameuserpc 10.10.0.156 tftp usermypass
相关考题：
Which command would you use to enable chassis cluster on an SRX device, setting the cluster ID to 1 and node to 0?() A. user@host# set chassis cluster cluster-id 1 node 0 rebootB. user@host set chassis cluster id 1 node 0 rebootC. user@host set chassis cluster cluster-id 1 node 0 rebootD. user@host# set chassis cluster id 1 node 0 reboot
You would like to configure your PC’s IP address of 10.10.0.156 as an FTP host with au ser name of user anda password of mypass.Which configuration command accomplishes this goal?() A.host userpc 10.10.0.156 ftp usermypassB.host userpc 10.10.0.156 tftp usermypassC.host nameuserpc 10.10.0.156 ftp usermypassD.host nameuserpc 10.10.0.156 tftp usermypass
In a PPP over ATM service offering,which command inserts the user's host route into the routing table?() A.ip host-routeB.ip access-routesC.ip dynamic host-routeD.ip route access-routes
Which command allows you to view interface usage details in real－time?() A.user@host debug interface interface-nameB.user@host monitor usage interface-nameC.user@host monitor interface interface-nameD.user@host traceoptions interface interface-name
Which three of the following protocols will be forwarded to a host specified by the ip helper - address interface configuration command if the configuration has not been modified by the ip forward - protocol udp global con figuration command?（）A. BOOTPB. TFTPC. ARPD. DNSE. proxy - ARPF. FTP
After executing the "show host" command, which of the information below would you see?() A. The IP addresses of workstations allowed gain access to the router via an access listB. Permanent name-to-address mappings created using the ip host command.C. Temporary and permanent DNS entries.D. The names of the routers created using the hostname command.E. The length of time of users logged into the router, as well as the duration
The network shown in the diagram is experiencing connectivity problems. Which of the following will correct the problems (Choose two.)()。 A.Configure the gateway on Host A as 10.1.1.1B.Configure the gateway on Host B as 10.1.2.254C.Configure the IP address of Host A as 10.1.2.2D.Configure the IP address of Host B as 10.1.2.2E.Configure the masks on both hosts to be 255.255.255.224F.Configure the masks on both hosts to be 255.255.255.240
Which three of the following protocols will be forwarded to a host specified by the ip helper - address interface configuration command if the configuration has not been modified by the ip forward - protocol udp global con figuration command?（）A、BOOTPB、TFTPC、ARPD、DNSE、proxy - ARPF、FTP
What does the ip access-routes configuration command accomplish?（）A、It statically places a host route in the routing table.B、It statically associates an IP address with a customer.C、It dynamically creates a host route in the routing table.D、It dynamically assigns an address to the router's interface
Assume the default-policy has not been configured.Given the configuration shown in the exhibit， which two statements about traffic from host_a inthe HR zone to host_b in the trust zone are true？（） [edit security policies from-zone HR to-zone trust] user@host# show policy one { match { source-address any； destination-address any； application [ junos-http junos-ftp ]； } then { permit； } } policy two { match { source-address host_a； destination-address host_b； application [ junos-http junos-smtp ]； } then { deny； } }A、DNS traffic is denied.B、HTTP traffic is denied.C、FTP traffic is permitted.D、SMTP traffic is permitted.
Which command allows you to view interface usage details in real-time?（）A、user@host debug interface interface-nameB、user@host monitor usage interface-nameC、user@host monitor interface interface-nameD、user@host traceoptions interface interface-name
In a PPP over ATM service offering,which command inserts the user's host route into the routing table?（）A、ip host-routeB、ip access-routesC、ip dynamic host-routeD、ip route access-routes
You would like to configure your PC's IP address of 10.10.0.156 as an FTP host with a username of user and a password of mypass.Which configuration command accomplishes this goal?（）A、host user pc 10.10.0.156 ftp user mypassB、host user pc 10.10.0.156 tftp user mypassC、host name user pc 10.10.0.156 ftp user mypassD、host name user pc 10.10.0.156 tftp user mypass
Which destination addresses will be used by Host A to send data to Host C?（）A、the IP address of Switch 1B、the MAC address of Switch 1C、the IP address of Host CD、the MAC address of Host CE、the IP address of the router's E0 interfaceF、the MAC address of the router's E0 interface
After executing the "show host" command, which of the information below would you see?（）A、The IP addresses of workstations allowed gain access to the router via an access listB、Permanent name-to-address mappings created using the ip host command.C、Temporary and permanent DNS entries.D、The names of the routers created using the hostname command.E、The length of time of users logged into the router, as well as the duration
[edit groups] user@host# show node0 { system { host-name NODE0； } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.1/24； } } } } } node1 { system { host-name NODE1； } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.2/24； } } } } } In the exhibit， what is the function of the configuration statements？（）A、This section is where you define all chassis clustering configuration.B、This configuration is required for members of a chassis cluster to talk to each other.C、You can apply this configuration in the chassis cluster to make configuration easier.D、This section is where unique node configuration is applied.
Which command would you use to enable chassis cluster on an SRX device, setting the cluster ID to 1 and node to 0?（）A、user@host# set chassis cluster cluster-id 1 node 0 rebootB、user@host set chassis cluster id 1 node 0 rebootC、user@host set chassis cluster cluster-id 1 node 0 rebootD、user@host# set chassis cluster id 1 node 0 reboot
You are implementing a very simple TCP/IP network. It rarely changes and you would like to use Oracle Connection Manager to filter client requests. Which naming method can you use？（）A、Only hostB、Only localC、Either host or localD、Both host and local
You work as a database administrator for Supportcenter.cn. You are using three database， SupportCenter DB01， SupportCenter DB02， and SupportCenter DB03， on different host machines in your development environment. The database server configuration， such as IP address and listener port number， change frequently due to development requirements， and you have the task of notifying the developers of the changes. Which connection method would you use to overcome this overhead？（）A、Host namingB、Local namingC、Easy ConnectD、External namingE、directory naming
You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）A、Configure a HOSTS file.B、Configure a LMHOSTS file.C、Configure a WINS server database.D、Configure a DHCP server address.E、Configure at least one DNS address.
You install the Web Server （IIS） role on and the SMTP Server feature on a server that runs Windows Server 2008. You need to configure the new SMTP server to forward mail to the mail server of the Internet Service Provider （ISP）. What should you do？（）A、Configure the smart host setting to use the local host.B、Configure the smart host setting to use the mail server of the ISP.C、Run the appcmd /delivery method：PickupDirectoryFromIis command.D、Configure the SMTP delivery setting to Attempt direct delivery before sending to smart host.
Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. You have a Remote Desktop Services infrastructure that hosts remote desktop sessions for users. You need to be able to revoke 240 Remote Desktop Services client access licenses (RDS CALs). What should you do?（）A、Configure the Remote Desktop Session Host (RD Session Host) server to use Per User licensing mode.Install 100 RDS CALs.B、Configure the Remote Desktop Session Host (RD Session Host) server to use Per User licensing mode.Install 20 RDS CALs.C、Configure the Remote Desktop Session Host (RD Session Host) server to use Per Device licensing mode. Install 20 RDS CALs.D、Configure the Remote Desktop Session Host (RD Session Host) server to use Per Device licensingmode. Install 100 RDS CALs.
Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. You have a Remote Desktop Services infrastructure that hosts remote desktop sessions for users. You need to be able to revoke 240 Remote Desktop Services client access licenses (RDS CALs). What should you do?（）A、Configure the Remote Desktop Session Host (RD Session Host) server to use Per User licensing mode.Install 100 RDS CALs.B、Configure the Remote Desktop Session Host (RD Session Host) server to use Per User licensing mode. Install 20 RDS CALs.C、Configure the Remote Desktop Session Host (RD Session Host) server to use Per Device licensing mode. Install 20 RDS CALs.D、Configure the Remote Desktop Session Host (RD S ession Host) server to use Per Device licensing mode. Install 100 RDS CALs.
单选题You would like to configure your PC’s IP address of 10.10.0.156 as an FTP host with au ser name of user anda password of mypass.Which configuration command accomplishes this goal？（）Ahost userpc 10.10.0.156 ftp usermypassBhost userpc 10.10.0.156 tftp usermypassChost nameuserpc 10.10.0.156 ftp usermypassDhost nameuserpc 10.10.0.156 tftp usermypass
单选题What does the ip access-routes configuration command accomplish?（）AIt statically places a host route in the routing table.BIt statically associates an IP address with a customer.CIt dynamically creates a host route in the routing table.DIt dynamically assigns an address to the router's interface
单选题You would like to configure your PC's IP address of 10.10.0.156 as an FTP host with a username of user and a password of mypass.Which configuration command accomplishes this goal?（）Ahost user pc 10.10.0.156 ftp user mypassBhost user pc 10.10.0.156 tftp user mypassChost name user pc 10.10.0.156 ftp user mypassDhost name user pc 10.10.0.156 tftp user mypass
单选题You create a shared Internet connection on a Windows 2000 Professional computer. Your network has 10 users on the LAN. All of the users can connect to HTTP sites， FTP sites， and streaming audio content on the Internet. One of the computers on your LAN is running an FTP host application. Users on the Internet cannot connect to the FTP host on your network. What should you do？（）AConfigure the FTP host to accept incoming requests on service port 80.BConfigure an Internet Connection Sharing application type for FTP to use remote server port 23.CConfigure an Internet Connection Sharing service type for FTP use service port 21 on the FTP host computer.DConfigure an Internet Connection Sharing service type for FTP use service port 23 on the FTP host computer.