A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。A.The router will use the static route.B.The router will use the OSPF route.C.The router will use the EIGRP route.D.The router will load balance and use all three routes.
A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。
A.The router will use the static route.
B.The router will use the OSPF route.
C.The router will use the EIGRP route.
D.The router will load balance and use all three routes.
相关考题：
Refer to the exhibit and the partial configuration on router R2. On router R4 all RIP routes are redistributed into the OSPF domain. A second redistribu tion is configured on router R2 using a route map. Based on the configuration on router R2, which EIGRP external routes will be present in the routing table of R1?（）A. the routes originating from the RIP routing domainB. the routes originating from the OSPF stub areaC. all OSPF inter and intra - area routesD. all routes originating from RIP and OSPF routing domains
Refer to the exhibit. EIGRP has been configured on router D. Router C is performing mutual redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem?（）A. The no auto - summary command needs to be added under router eigrp 1B. The subnets keyword was not included in the redistribute command under router ospf 1C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router AD. The default - information originate command needs to be added under router ospf 1E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF
Refer to the exhibit. Router B is performing bidirectional redistribution between EIGRP an d OSPF.The network 10.100.1.0/24 should not be reachable from the 10.100.9.0/24 network. However, it needs to be reachable from any network within the EIGRP domain. All other networks should be seen in both domains. Which change to router B would accom plish these goals?（）A. Under the EIGRP process, insert the distribute - list block_net_1 out ospf 1 command.B. Under the OSPF process, insert the distribute - list block_net_1 in serial1/0 command.C. Under the EIGRP process, insert the distribute - list block_net_1 in serial1/0 command.D. Under the OSPF process, insert the distribute - list block_net_1 out eigrp 1 command.
Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?() A. Redistribution must be enabled mutually (in both directions) to work correctly.B. auto - summary causes the OSPF routes redistributed into EIGRP to be summarized; thus the OSPF network 116.16.34 is summarized to 116.3 4.0.0, which is already covered by the EIGRP protocol.C. Default metrics are not configured under EIGRP.D. Both routing protocols must have unique autonomous system numbers for redistribution to function correctly.
Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip eigrp topology output provided, what conclusion can be deri ved? () A.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out inquiring for a second successor to network 10.6.1.0/24B.Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0C.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out before it declares the neighbor unreachableD.Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out about network 10 .6.1.0/24
A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）A. the OSPF routeB. the EIGRP routeC. the RIPv2 routeD. all three routesE. the OSPF and RIPv2 routes
A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。A、The router will use the static route.B、The router will use the OSPF route.C、The router will use the EIGRP route.D、The router will load balance and use all three routes.
You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also， if the local OSPF route goes away， the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）A、static route needs to be addedB、floating static route needs to be addedC、bgp backdoor commandD、ospf backdoor command
A router receives information about network 192.168.10.0/24 from multiple sources.What will the routerconsider the most reliable information about the path to that network？（）A、an OSPF update for network 192.168.0.0/16B、a static router to network 192.168.10.0/24C、a static router to network 192.168.10.0/24 with a local serial interface configured as the next hopD、a RIP update for network 192.168.10.0/24E、a directly connected interface with an address of 192.168.10.254/24F、a default route with a next hop address of 192.168.10.1
A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782.The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）A、Router R2 will not form a neighbor relationship with R1.B、Router R2 will obtain a full routing table, including a default route, from R1.C、R2 will obtain OSPF updates from R1, but will not obtain a default route from R1.D、R2 will not have a route for the directly connected serial network, but all other directly connected
A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）A、The router will use the static route.B、The router will use the OSPF route.C、The route will use the EIGRP route.D、The router will load balance and use all three routes.
A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?（）A、an OSPF update for network 192.168.0.0/16B、a static router to network 192.168.10.0/24C、a static router to network 192.168.10.0/24 with a local serial interface configured as the next hopD、a RIP update for network 192.168.10.0/24E、a directly connected interface with an address of 192.168.10.254/24F、a default route with a next hop address of 192.168.10.1
What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network？（）A、A hub router prevents routes from being advertised to the remote router.B、Only remote routers are configured as stubs.C、Stub routers are not queried for routes.D、Spoke routers connected to hub routers answer the route queries for the stub router.E、A stub router should have only EIGRP hub routers as neighbors.F、EIGRP stub routing should be used on hub routers only.
A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network（）。A、a directly connected interface with an address of 192.168.10.254/24B、a static route to network 192.168.10.0/24C、a RIP update for network 192.168.10.0/24D、an OSPF update for network 192.168.0.0/16E、a default route with a next hop address of 192.168.10.1F、a static route to network 192.168.10.0/24 with a local serial interface configured as the next hop
Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors？（）A、By adding all subnets listed by the show ip route connected commandB、By adding the subnets of working interfaces over which static neighbors have been definedC、By adding subnets redistributed on the local router from another routing sourceD、By adding all subnets listed by the show ip route static command
A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）A、the OSPF routeB、the EIGRP routeC、the RIPv2 routeD、all three routesE、the OSPF and RIPv2 routes
For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?（）A、The router must have one routing protocol configured, but configuration for both routing protocols is not necessaryB、The router must hav e at least one working link connected to each routing domainC、The redistribute command must be configured under EIGRP to send the routes to OSPFD、The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF
单选题A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）Athe OSPF routeBthe EIGRP routeCthe RIPv2 routeDall three routesEthe OSPF and RIPv2 routes
单选题A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。AThe router will use the static route.BThe router will use the OSPF route.CThe router will use the EIGRP route.DThe router will load balance and use all three routes.
单选题A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782.The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）ARouter R2 will not form a neighbor relationship with R1.BRouter R2 will obtain a full routing table, including a default route, from R1.CR2 will obtain OSPF updates from R1, but will not obtain a default route from R1.DR2 will not have a route for the directly connected serial network, but all other directly connected
单选题You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also，if the local OSPF route goes away，the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）Astatic route needs to be addedBfloating static route needs to be addedCbgp backdoor commandDospf backdoor command
单选题A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network？（）Aan OSPF update for network 192.168.0.0/16Ba static router to network 192.168.10.0/24Ca static router to network 192.168.10.0/24 with a local serial interface configured as the next hopDa RIP update for network 192.168.10.0/24Ea directly connected interface with an address of 192.168.10.254/24Fa default route with a next hop address of 192.168.10.1
多选题What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network？（）AA hub router prevents routes from being advertised to the remote router.BOnly remote routers are configured as stubs.CStub routers are not queried for routes.DSpoke routers connected to hub routers answer the route queries for the stub router.EA stub router should have only EIGRP hub routers as neighbors.FEIGRP stub routing should be used on hub routers only.
单选题A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）AThe router will use the static route.BThe router will use the OSPF route.CThe route will use the EIGRP route.DThe router will load balance and use all three routes.
多选题Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors？（）ABy adding all subnets listed by the show ip route connected commandBBy adding the subnets of working interfaces over which static neighbors have been definedCBy adding subnets redistributed on the local router from another routing sourceDBy adding all subnets listed by the show ip route static command
单选题A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network（）。Aa directly connected interface with an address of 192.168.10.254/24Ba static route to network 192.168.10.0/24Ca RIP update for network 192.168.10.0/24Dan OSPF update for network 192.168.0.0/16Ea default route with a next hop address of 192.168.10.1Fa static route to network 192.168.10.0/24 with a local serial interface configured as the next hop
单选题A router receives information about network 192.168.10.0/24 from multiple sources.What will the routerconsider the most reliable information about the path to that network？（）Aan OSPF update for network 192.168.0.0/16Ba static router to network 192.168.10.0/24Ca static router to network 192.168.10.0/24 with a local serial interface configured as the next hopDa RIP update for network 192.168.10.0/24Ea directly connected interface with an address of 192.168.10.254/24Fa default route with a next hop address of 192.168.10.1