配置默认路由的命令是( )。A.ip route 172.16.1.0 255.255.255.0 0.0.0.0B.ip route 172.16.1.0 255.255.255.0 172.16.2.1C.ip route 0.0.0 255.255.255.0 172.16.2.1D.ip route 0.0.0.0 0.0.0.0 172.16.2.1

配置默认路由的命令是( )。

A.ip route 172.16.1.0 255.255.255.0 0.0.0.0B.ip route 172.16.1.0 255.255.255.0 172.16.2.1C.ip route 0.0.0 255.255.255.0 172.16.2.1D.ip route 0.0.0.0 0.0.0.0 172.16.2.1


相关考题:

【问题2】(4分)根据网络拓扑和要求,完成路由器R2 上的静态路由配置。R2 (config)#ip route (5) 255.255.255.0 192.168.1.1R2 (config)#ip route 10.10.30.0 255.255.255.0 (6)R2 (config)#ip route 10.10.10.0 255.255.255.0 192.168.2.2

如下图所示为三台路由器的连接与IP地址分配,在R2中配置到达子网192.168.1.0/24的静态路由的命令是( )。A) R2(config)#ip route 192.168.1.2 255.255.255.0 10.1.1.2B) R2(config)#ip route 192.168.1.1 255.255.255.0 10.1.1.2C) R2(config)#ip route 192.168.1.2 255.255.255.0 10.1.1.1D) R2(config)#ip route 192.168.1.0 255.255.255.0 10.1.1.1

配置BFD与静态默认路由联动的命令是:() A.IP route-static 0.0.0.0.0.0.0.0 10.0.12.2 bfd-session 1B.IP route-static 0.0.0.0.0.0.0.0 10.0.12.2 trackbfd-session 1C.IP route-static 0.0.0.0.0.0.0.0 10.0.12.2 track 1D.IP route-static 0.0.0.0.0.0.0.0 10.0.12.2 track session1

以下配置静态路由的命令中,哪项是正确的?______。A.R2 (config) #ip route 192.168.1.5.0.0.0.255 10.1.1.2B.R2 (config) #ip route 192.168.1.5 255.255.254.0 10.1.1.2C.R2 (config) #ip route 192.168.1.5 255.255.255.0 10.1.1.2D.R2 (config) #ip route 192.168.1.5 255.0.0.0 10.1.1.2

以下关于配置默认路由的命令中,哪项是正确的?——A.ip route 0.0.0.0.0.0.0.0 152.17.10.1B.ip router0.0.0.0.0.0.0.0 152.17.10.10C.ip router 0.0.0.0.0.0.0.0 152.17.10.1D.ip route 0.0.0.0255.255.255.255 152.17.10.1

华为路由器静态路由的配置命令为()A.ip route-staticB.ip route staticC.route-static ipD.route static ip

以下配置静态路由的命令中,哪项是正确的?——A.R2(config)#ip route 192.168.1.5 0.0.0.255 10.1.1.2B.R2(config)#ip route 192.168.1.5 255.255.254.0 10.1.1.2C.R2(config)#ip route 192.168.1.5 255.255.255.0 10.1.1.2D.R2(config)#ip route 192.168.1.5 255.0.0.0 10.1.1.2

某局域网的Internet接入拓扑图如图8-5所示。在路由器Router上定义一条到达Internet网的默认路由,完成此任务的配置语句是(49)。A.ip route 192.168.0.0 255.255.255.0 61.235.1.1B.ip route 192.168.0.0 255.255.255.0 s0/0C.ip route 0.0.0.0 0.0.0.0 61.235.1.1D.ip route 0.0.0.0 0.0.0.0 s0/1

以下配置默认路由的命令正确的是(52)。A.ip route 0.0.0.0 0.0.0.0 192.168.10.1B.ip router 0.0.0.0 0.0.0.0 192.168.10.1C.ip router 0.0.0.0 0.0.0.0 192.168.10.1D.ip route 0.0.0.0 255.255.255.255 192.168.10.1

网络配置如下图所示,为路由器Router1配置访问以太网2的命令是(53)。A.ip route 192.1.10.60 255.255.255.192 192.200.10.6B.ip route 192.1.10.65 255.255.255.26 192.200.10.6C.ip route 192.1.10.64 255.255.255.26 192.200.10.65D.ip route 192.1.10.64 255.255.255.192 192.200.10.6

网络配置如下图所示,在路由器Router中配置网络1访问DNS服务器的主机录的主机路由的命令是( )。网络1访问Internet的默认路由命令是( )。A.ip route 202.168.1.2 255.255.255.0 202.168.1.2 B.ip route 202.168.1.2 255.255.255.255 202.168.1.2 C.ip route 0.0.0.0 0.0.0.0 202.168.1.253 D.ip route 255.255.255.255 0.0.0.0 202.168..1.254 A.ip route 202.168.1.2 255.255.255.0 202.168.1.2 B.ip route 202.168.1.2 255.255.255.255 202.168.1.2 C.ip route 0.0.0.0 0.0.0.0 202.168.1.253 D.ip route 255.255.255.255 0.0.0.0 202.168..1.254

根据网络拓扑和要求,完成路由器R2上的静态路由配置。R2(eonfig)ip route(5)255.255.255.0 192.168.1.1R2(eonfig)ip mute 10.10.30.0 255.255.255.0(6)R2(config)ip route 10.10.10.0 255.255.255.0 192.168.2.2

Refer to the exhibit. Router R1 is connected to networks 172.1 6.1.0 /26 and 172.16.1.64 /27. On the basis of the partial output in the exhibit, which statement is true? () A. Router R1 will deny the 172.16.1.0/26 route while permitting the 172.16.1.64/27 route to be advertised.B. Router R1 will advertise both rou tes.C. Router R1 should be reconfigured with an ACL instead of an ip prefix - list command.D. Router R1 will deny the 172.16.1.0/27 route while permitting the 172.16.1.0/26 route to be advertised.

Refer to the exhibit. Which three statements are true?() A.On the routing table of R4, the 10.1.1.0/24 route appears as an O E2 routeB.On R4, the 172.16.1.0/24 route has a metric of 20C.The R3 S0/0 interface should not need the no ip split - horizon eigrp 1 configuration command for the 172.16.1.0/24 route to appear in the routing table of R2 as an D EX routeD.The administrative distance of the 172.16.1.0/24 route in the routing table of R3 is 170E.On R5, the 4.0.0.0/8 route will have an administrative distance of 120 and a hop co unt of 6

Which command is used to configure a default route?() A. ip route 172.16.1.0 255.255.255.0 0.0.0.0B. ip route 172.16.1.0 255.255.255.0 172.16.2.1C. ip route 0.0.0.0 255.255.255.0 172.16.2.1D. ip route 0.0.0.0 0.0.0.0 172.16.2.1

3台路由器的连接与IP地址分配如下图所示,在R2中配置到达子网192.168.1.0/24的静态路由的命令是——。A.R2(config)#ip route 192.168.1.0 255.255.255.O lO.1.1.1B.R2(config)#ip route 192.168.1.2 255.255.255.0 10.1.1.1C.R2(config)#ip route 192.168.1.1 255.255.255.0 10.1.1.2D.R2(config)#ip route 192.168.1.2 255.255.255.0 10.1.1.2

下列选项中,配置默认路由的命令正确的是( )。A.ip router 0.0.0.0.0.0.0.0 172.16.10.1B.ip router 0.0.0.0.0.0.0.0 172.16.10.10C.ip route 0.0.0.0.0.0.0.0 172.16.10.1D.ip route 0.0.0.0.255.255.255.255 172.16.10.1

以下配置默认路由的命令正确的是______。A.ip route 0.0.0.0.0.0.0.0 172.16.10.1B.ip router 0.0.0.0.0.0.0.0 172.16.10.1C.ip router 0.0.0.0.0.0.0.0 172.16.10.10D.ip route 0.0.0.0.255.255.255.255 172.16.10.1

配置路由器默认路由的命令是A.ip route 220.117.15.0 255.255.255.0 0.0.0.0B.ip route 220.117.15.0 255.255.255.0 220.117.15.1C.ip route 0.0.0.0 255.255.255.0 220.117.15.1D.ip route 0.0.0.0 0.0.0.0 220.117.15.1

网络配置如下图所示,在路由器 Router 中配置网络 1 访问 DNS 服务器的主机路由命令是( )A. ip route 202.168.1.2 255.255.255.0 202.168.1.2 B. ip route 202.168.1.2 255.255.255.255 202.168.1.2C. ip route 0.0.0.0 0.0.0.0 202.168.1.253D. ip route 255.255.255.255 0.0.0.0 202.168.1.254

网络配置如下图所示,在路由器 Router 中配置网络 1 访问 DNS 服务器的主机路由命令是(上题),网络 1 访问 Internet 的默认路由命令是(本题)。A. ip route 202.168.1.2 255.255.255.0 202.168.1.2 B. ip route 202.168.1.2 255.255.255.255 202.168.1.2C. ip route 0.0.0.0 0.0.0.0 202.168.1.253D. ip route 255.255.255.255 0.0.0.0 202.168.1.254

局域网的网络地址192.168.1.0/24,其网关地址是192.168.1.1。主机192.168.1.20访问172.16.1.0/24网络时,其路由设置正确的是()。A、route add–net 192.168.1.0 gw 192.168.1.1netmask 255.255.255.0metric1B、route add–net 172.16.1.0 gw 192.168.1.1netmask 255.255.255.255metric1C、route add–net 172.16.1.0 gw 172.16.1.1netmask 255.255.255.0metric1D、route adddefault 192.168.1.0 netmask 172.168.1.1metric1

局域网的网络地址192.168.1.0/24,局域网络连接其它网络的网关地址是192.168.1.1。主机192.168.1.20访问172.16.1.0/24网络时,其路由设置正确的是()A、route add default 192.168.1.0 netmask 172.168.1.1 metric 1B、route add -net 192.168.1.0 gw 192.168.1.1 netmask 255.255.255.0 metric 1C、route add -net 172.16.1.0 gw 172.16.1.1 netmask 255.255.255.0 metric 1D、route add -net 172.16.1.0 gw 192.168.1.1 netmask 255.255.255.0 metric 1

配置静态路由的命令是()A、rip routerB、ip ospfC、ip route 255.255.255.0 192.168.3.0 1.1.1.1D、ip route

局域网的网络地址192.168.1.0/24,局域网络连接其它网络的网关地址是192.168.1.1。主机192.168.1.20访问172.16.1.0/24网络时,其路由设置正确的是()。A、route add–net192.168.1.0 gw192.168.1.1 netmask255.255.255.0 metric1B、route add–net172.16.1.0 gw192.168.1.1 netmask255.255.255.255 metric1C、route add–net172.16.1.0 gw172.16.1.1 netmask255.255.255.0 metric1D、route add default192.168.1.0netmask172.168.1.1 metric1

局域网的网络地址192.168.1.0/24,局域网络连接其它网络的网关地址是192.168.1.1。主机192.168.1.20访问172.16.1.0/24网络时,路由设置正确的是()。A、route add–net192.168.1.0 gw 192.168.1.1 netmask 255.255.255.0 metric1B、route add–net172.16.1.0 gw 192.168.1.1 netmask 255.255.255.255 metric1C、route add–net172.16.1.0 gw 172.16.1.1 netmask 255.255.255.0 metric1D、route add default 192.168.1.0 netmask 172.168.1.1 metric1

单选题Which command is used to configure a default route?()Aip route 172.16.1.0 255.255.255.0 0.0.0.0Bip route 172.16.1.0 255.255.255.0 172.16.2.1Cip route 0.0.0.0 255.255.255.0 172.16.2.1Dip route 0.0.0.0 0.0.0.0 172.16.2.1