单选题Which of the following MOST likely causes problems with SCSI communication?（）ALow communication latencyBMaximum drive capacity is exceededCImproper terminationDToo many SCSI devices on one system
单选题
Which of the following MOST likely causes problems with SCSI communication?（）
A
Low communication latency
B
Maximum drive capacity is exceeded
C
Improper termination
D
Too many SCSI devices on one system
参考解析
解析：
暂无解析
相关考题：
Which of the following network topologies is MOST likely to affect other devices on the network if there is a problem with one of the devices? () A.MeshB.BusC.RingD.Star
A server has five hot pluggable SCSI disk drives in a RAID 5 array. The server OS crashed and the server will not boot. The administrator noticed that all of the disk drives have gone offline.Which of the following components would MOST likely have caused the problem?（）A. MemoryB. SCSI backplaneC. SCSI drivesD. Motherboard
Which of the following MOST likely causes problems with SCSI communication?() A. Low communication latencyB. Maximum drive capacity is exceededC. Improper terminationD. Too many SCSI devices on one system
Which command enables new devices that are connected to the scsi5 adapter without performing a full scan of the system?() A.cfgmgr -f scsi5B.cfgmgr -i scsi5C.cfgmgr -t scsi5D.cfgmgr -l scsi5
Which three are characteristics of an IPV6 anycast address?() A.any-to-many communication modelB.delivery of packets to the group interface that is closest to the sending deviceC.one-to-many communication modelD.the same address for multiple devices in the groupE.one-to-nearest communication modelF.a unique IPV6 address for each device in the group
Which of the following network topologies is MOST likely to affect other devices on the network if there is a problem with one of the devices? （）A、MeshB、BusC、RingD、Star
Click on the Exhibit button. Which of the following connectors is image D?（）A、80 Pin SCSI ConnectorB、68 Pin SCSI Connector, High DensityC、50 Pin SCSI Connector, High DensityD、50 Pin SCSI Connector, Low Density
Which of the following is the number of SCSI devices that can be added to a single narrow SCSI bus?（）A、6B、7C、8D、9
Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape. Which of the following actions will enable the creation of the partitions with minimal intervention？（）A、Install a VIO partition to share the tape drive.B、Purchase three external SCSI adapters and physically move the tape drive when needed.C、Create the partition definitions with the SCSI adapter as a desired resource and use DLPAR commands to move the tape drive.D、Create the partition definitions with the SCSI adapter as a required resource for all partitions and use DLPAR commands to move the tape drive.
Which three are characteristics of an IPV6 anycast address?（）A、any-to-many communication modelB、delivery of packets to the group interface that is closest to the sending deviceC、one-to-many communication modelD、the same address for multiple devices in the groupE、one-to-nearest communication modelF、a unique IPV6 address for each device in the group
Which of the following internal storage technologies has the HIGHEST single drive storage capacity?（）A、SASB、SATAC、FlashD、SCSI
A server has five hot pluggable SCSI disk drives in a RAID 5 array. The server OS crashed and the server will not boot. The administrator noticed that all of the disk drives have gone offline.Which of the following components would MOST likely have caused the problem？（）A、MemoryB、SCSI backplaneC、SCSI drivesD、Motherboard
Which of the following MOST likely causes problems with SCSI communication?（）A、Low communication latencyB、Maximum drive capacity is exceededC、Improper terminationD、Too many SCSI devices on one system
You ran out of space and added a eighth disk to your SCSI-1 system. When you try to start， the system no longer boots. What is most likely the cause of this problem？（）A、 SCSI-1 supports only 8 devices including the adaptor.B、 SCSI-1 supports only 6 disks per adaptor.C、 There is a SCSI-ID conflict that causes that problem.D、 You forgot to set the SCSI-ID #8 for the new disk.
The latest SCSI adaptor card is purchased from a vendor. Drivers for the operating system cannot be obtained. The SCSI adapter card is added to an existing server. Upon booting， the operating system does not detect the card. Which of the following is the MOST likely cause of the problem？（）A、 The SCSI card is not seated correctly.B、 The termination is incorrectly set on the SCSI card.C、 The SCSI card is not listed on the operating system HCL （Hardware Compatibility List）.D、 Operating system patches were not updated before installing the card.
Which command enables new devices that are connected to the scsi5 adapter without performing a full scan of the system?（）A、cfgmgr -f scsi5B、cfgmgr -i scsi5C、cfgmgr -t scsi5D、cfgmgr -l scsi5
单选题The latest SCSI adaptor card is purchased from a vendor. Drivers for the operating system cannot be obtained. The SCSI adapter card is added to an existing server. Upon booting， the operating system does not detect the card. Which of the following is the MOST likely cause of the problem？（）A The SCSI card is not seated correctly.B The termination is incorrectly set on the SCSI card.C The SCSI card is not listed on the operating system HCL （Hardware Compatibility List）.D Operating system patches were not updated before installing the card.
单选题Which of the following is the number of SCSI devices that can be added to a single narrow SCSI bus?（）A6B7C8D9
多选题A server has lost communication to its drives located on a fiber channel SAN.An administrator notices that the indicator lights on both the HBA and the SAN switch are not lit.Which of the following are the MOST likely causes of the problem？（）AFailed HBABFailed switch portCFaulty fiber cableDFaulty driverEFailed hard drivesFFaulty configuration
单选题Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape. Which of the following actions will enable the creation of the partitions with minimal intervention？（）AInstall a VIO partition to share the tape drive.BPurchase three external SCSI adapters and physically move the tape drive when needed.CCreate the partition definitions with the SCSI adapter as a desired resource and use DLPAR commands to move the tape drive.DCreate the partition definitions with the SCSI adapter as a required resource for all partitions and use DLPAR commands to move the tape drive.
单选题A server has five hot pluggable SCSI disk drives in a RAID 5 array. The server OS crashed and the server will not boot. The administrator noticed that all of the disk drives have gone offline. Which of the following components would MOST likely have caused the problem？（）A MemoryB SCSI backplaneC SCSI drivesD Motherboard
单选题Which of the following internal storage technologies has the HIGHEST single drive storage capacity？ （）A SASB SATAC FlashD SCSI
单选题Click on the Exhibit button. Which of the following connectors is image D?（）A80 Pin SCSI ConnectorB68 Pin SCSI Connector, High DensityC50 Pin SCSI Connector, High DensityD50 Pin SCSI Connector, Low Density
单选题You ran out of space and added a eighth disk to your SCSI-1 system. When you try to start， the system no longer boots. What is most likely the cause of this problem？（）A SCSI-1 supports only 8 devices including the adaptor.B SCSI-1 supports only 6 disks per adaptor.C There is a SCSI-ID conflict that causes that problem.D You forgot to set the SCSI-ID #8 for the new disk.
单选题Which of the following MOST likely causes problems with SCSI communication?（）ALow communication latencyBMaximum drive capacity is exceededCImproper terminationDToo many SCSI devices on one system
单选题Which of the following MOST likely causes problems with SCSI communication？（）A Low communication latencyB Maximum drive capacity is exceededC Improper terminationD Too many SCSI devices on one system
单选题Which command enables new devices that are connected to the scsi5 adapter without performing a full scan of the system?（）Acfgmgr -f scsi5Bcfgmgr -i scsi5Ccfgmgr -t scsi5Dcfgmgr -l scsi5
单选题Which of the following network topologies is MOST likely to affect other devices on the network if there is a problem with one of the devices? （）AMeshBBusCRingDStar