Interface ge-0/0/2.0 of your router is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A host with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. This host isattached to the ge-0/0/0.0 interface of your router. You must use interface-based static NAT to make the HTTP service on the host reachable from the Internet. On which IP address and TCP port can Internet hosts reach the HTTP service?（）A、IP address 10.10.10.1 and TCP port 8080B、IP address 71.33.252.17 and TCP port 80C、IP address 71.33.251.19 and TCP port 80D、IP address 71.33.252.19 and TCP port 8080
Interface ge-0/0/2.0 of your router is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A host with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. This host isattached to the ge-0/0/0.0 interface of your router. You must use interface-based static NAT to make the HTTP service on the host reachable from the Internet. On which IP address and TCP port can Internet hosts reach the HTTP service?（）
- A、IP address 10.10.10.1 and TCP port 8080
- B、IP address 71.33.252.17 and TCP port 80
- C、IP address 71.33.251.19 and TCP port 80
- D、IP address 71.33.252.19 and TCP port 8080
相关考题：
Click the Exhibit button.System services SSH, Telnet, FTP, and HTTP are enabled on the SRX Series device.Referring to the configuration shown in the exhibit, which two statements are true? （）(Choose two.)A. A user can use SSH to interface ge-0/0/0.0 and ge-0/0/1.0.B. A user can use FTP to interface ge-0/0/0.0 and ge-0/0/1.0.C. A user can use SSH to interface ge-0/0/0.0.D. A user can use SSH to interface ge-0/0/1.0.
Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A Web server with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. The Web server is attached to the ge-0/0/0.0 interface of your device. You must use NAT to make the Web server reachable from the Internet using port translation.Which type of NAT must you configure?（）A. source NAT with address shiftingB. pool-based source NATC. static destination NATD. pool-based destination NAT
Referring to the exhibit, what are two differences between the active and candidate configurations?() A. The ge-0/0/0 interface was added to the candidate configuration.B. Area 0 was added to the active configuration.C. Area 1 was added to the candidate configuration.D. The ge-0/0/0 interface was added to the active configuration.
Which command sequence displays queue statistics for an interface?() A.monitor interface ge-0/0/0 queueB.show interfaces queue ge-0/0/0C.show interfaces ge-0/0/0 statistics extensiveD.show statistics queue detail
Which command sequence shows traffic per queue for an interface?() A.show interfaces queue ge-0/0/0B.show statistics queue detailC.show interfaces ge-0/0/0 statistics extensiveD.monitor interface ge-0/0/0 queue
In the exhibit, there are four static routes that route traffic through different interfaces.Which interface does the router use if traffic is sent to the 99.0.0.1 destination?() A. ge-0/0/1B. ge-0/0/2C. ge-0/0/3D. ge-0/0/4
How is a loopback cleared on interface ge-0/0/0?（）A、Issue the operational command clear interfaces ge-0/0/0 loopback local.B、No command is necessary, the loopback times-out in 5 minutes.C、Issue the configuration command clear interfaces ge-0/0/0 loopback, then commit.D、Issue the configuration command delete interfaces ge-0/0/0 gigether-options loopback , then commit.
Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A Web server with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. The Web server is attached to the ge-0/0/0.0 interface of your device. You must use NAT to make the Web server reachable from the Internet using port translation. Which type of NAT must you configure?（）A、source NAT with address shiftingB、pool-based source NATC、static destination NATD、pool-based destination NAT
You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）A、[edit security policies from-zone HR to-zone HR]B、[edit security zones functional-zone management protocols]C、[edit security zones protocol-zone HR host-inbound-traffic]D、[edit security zones security-zone HR host-inbound-traffic protocols]
Your network administrator has asked you to view the real-time interface usage on ge-0/0/0. Which command would be used?（）A、monitor interface ge-0/0/0B、traceoptions interface ge-0/0/0C、debug interface ge-0/0/0D、monitor usage ge-0/0/0
Which command would initiate a loopback on a Gigabit Ethernet interface ge-0/0/0?（）A、# set interfaces ge-0/0/0 unit 0 loopbackB、# set interfaces ge-0/0/0 gigether-options loopbackC、 set interfaces ge-0/0/0 loopbackD、 loopback ge-0/0/0
Which type of source NAT is configured in the exhibit？（） [edit security nat source] user@host# show rule-set 1 { from interface ge-0/0/2.0； to zone untrust； rule 1A {match { destination-address 1.1.70.0/24； } then { source-nat interface； } } }A、interface-based source NATB、static source NATC、pool-based source NAT with PATD、pool-based source NAT without PAT
单选题In the exhibit, there are four static routes that route traffic through different interfaces.Which interface does the router use if traffic is sent to the 99.0.0.1 destination?（）A ge-0/0/1B ge-0/0/2C ge-0/0/3D ge-0/0/4
单选题How is a loopback cleared on interface ge-0/0/0?（）AIssue the operational command clear interfaces ge-0/0/0 loopback local.BNo command is necessary, the loopback times-out in 5 minutes.CIssue the configuration command clear interfaces ge-0/0/0 loopback, then commit.DIssue the configuration command delete interfaces ge-0/0/0 gigether-options loopback , then commit.
单选题Interface ge-0/0/2.0 of your device is attached to the Internet and is configured with an IP address andnetwork mask of 71.33.252.17/24. A webserver with IP address 10.20.20.1 isrunning an HTTP service on TCP port 8080. The webserver is attached to the ge-0/0/0.0 interface of yourdevice. You must use NAT to make the webserver reachable from the Internet using port translation.Which type of NAT must you configure？（）Asource NAT with address shiftingBpool-based source NATCstatic destination NATDpool-based destination NAT
单选题Interface ge-0/0/2.0 of your router is attached to the Internet and is configured with an IP address and network mask of 71.33.252.17/24. A host with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. This host isattached to the ge-0/0/0.0 interface of your router. You must use interface-based static NAT to make the HTTP service on the host reachable from the Internet. On which IP address and TCP port can Internet hosts reach the HTTP service?（）AIP address 10.10.10.1 and TCP port 8080BIP address 71.33.252.17 and TCP port 80CIP address 71.33.251.19 and TCP port 80DIP address 71.33.252.19 and TCP port 8080
多选题Which two commands would change the default OSPF metric calculation for interface ge-0/3/0 inJUNOS software?（）Aset interfaces ge-0/3/0 unit 0 metric 10Bset protocols ospf reference-bandwidth 10gCset interfaces ge-0/3/0 unit 0 bandwidth 10gDset protocols ospf area 0 interface ge-0/3/0 metric 10Eset protocols ospf area 0 interface ge-0/3/0 bandwidth 10g
单选题Which command sequence displays queue statistics for an interface?（）Amonitor interface ge-0/0/0 queueBshow interfaces queue ge-0/0/0Cshow interfaces ge-0/0/0 statistics extensiveDshow statistics queue detail
多选题Which two commands would change the default OSPF metric calculation for interface ge-0/3/0 in JUNOS software？（）Aset interfaces ge-0/3/0 unit 0 metric 10Bset protocols ospf reference-bandwidth 10gCset interfaces ge-0/3/0 unit bandwidth 10gDset protocols ospf area 0 interface ge-0/3/0 metric 10Eset protocols ospf area 0 interface ge-0/3/0 bandwidth 10g
单选题Your network administrator has asked you to view the real-time interface usage on ge-0/0/0, Which command whould be used?（）Amonitor interface ge0/0/0Btraceoptions interface ge-0/0/0Cdebug interface ge0/0/0Dmonitor usage ge-0/0/0
单选题Your network administrator has asked you to view the real-time interface usage on ge-0/0/0.Which command whould be used?（）Amonitor interface ge0/0/0Btraceoptions interface ge-0/0/0Cdebug interface ge0/0/0Dmonitor usage ge-0/0/0
单选题Which command would initiate a loopback on a Gigabit Ethernet interface ge-0/0/0?（）A# set interfaces ge-0/0/0 unit 0 loopbackB# set interfaces ge-0/0/0 gigether-options loopbackC set interfaces ge-0/0/0 loopbackD loopback ge-0/0/0
单选题Which command sequence shows traffic per queue for an interface?（）Ashow interfaces queue ge-0/0/0Bshow statistics queue detailCshow interfaces ge-0/0/0 statistics extensiveDmonitor interface ge-0/0/0 queue
单选题You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）A[edit security policies from-zone HR to-zone HR]B[edit security zones functional-zone management protocols]C[edit security zones protocol-zone HR host-inbound-traffic]D[edit security zones security-zone HR host-inbound-traffic protocols]
单选题Which command configures an address of 192.168.1.1 with a mask of 255.255.255.0 on interface ge-0/0/0?（）Aset ip interface ge-0/0/0 address 192.168.1.1 255.255.255.0Bset ip interface ge-0/0/0 address 192.168.1.1/24Cset interface ge-0/0/0 ip4 address 192.168.1.1 mask 255.255.255.0Dset interfaces ge-0/0/0 unit 0 family inet address 192.168.1.1/24
单选题You want to create an out-of-band management zone and assign the ge-0/0/0.0 interface to that zone.From the [edit] hierarchy, which command do you use to configure this assignment?（）Aset security zones management interfaces ge-0/0/0.0Bset zones functional-zone management interfaces ge-0/0/0.0Cset security zones functional-zone management interfaces ge-0/0/0.0Dset security zones functional-zone out-of-band interfaces ge-0/0/0.0
多选题Which two commands may be used when configuring an IP address for a Gigabit Ethernet interface?（）Aset interfaces ge-0/0/0.0 address 10.1.1.1/24Bset interfaces ge-0/0/0.0 family inet address 10.1.1.1/24Cset interfaces ge-0/0/0 unit 0 family inet address 10.1.1.1/24Dset interfaces ge-0/0/0 address 10.1.1.1/24