Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?（）A、Random bluescreen errorB、Inaccessible boot driveC、Missing NTLDRD、Invalid boot disk
Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?（）
- A、Random bluescreen error
- B、Inaccessible boot drive
- C、Missing NTLDR
- D、Invalid boot disk
相关考题：
A folder on your Windows 2000 Professional computer contains bitmap files that have been compressed from 2MB to 1MB. You want to copy one of the compressed bitmap files from the hard disk to 1.4-MB floppy disk.When you attempt to copy, you receive the following error message 'Destination drive is Full'.What should to do?A．Move, rather than copy, the compressed bitmap file to the floppy disk.B．Reformat the floppy disk. Then copy the compressed bitmap file to the floppy disk.C．Use another program to compress the bitmap file before copying it to the floppy disk.D．Copy an empty compressed folder to the floppy disk. Then copy the compressed bitmap file to the folder on the floppy disk.
You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".Which two actions should you take to eliminate the STOP error? (Choose Two)A. Modify the Boot.ini file.B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.C. Select Safe Mode from the Windows 2000 boot menu.D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.E. Install a driver for the RAID controller form. a floppy disk.F. Use Device Manager to update the driver for the RAID controller.
A technician receives an error message ‘inaccessible boot device’ on their monitor. Which of thefollowing components is causing the issue?() A. Hard disk drive failureB. NTLDR file is missingC. BIOS is corruptedD. System board failure
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started.Which of the following Windows utilities would help configure the new hard disk?（）A. Disk ManagementB. Services and ApplicationsC. Removable StorageD. Device Manager
You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.You want to install Windows 2000 Server from source files that are located on a server on the network.What should you do?A．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.B．Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.C．On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.D．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."Which two actions should you take to eliminate the STOP error? (Choose Two)A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.B．Select Safe Mode from the Windows 2000 boot menu.C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.D．Install a driver for the SCSI controller from a floppy disk.E．Use Device Manager to update the driver for the SCSI controller.
POST errors in the 17xx range generally indicate ()errors. A.USBB.Floppy disk driveC.MotherboardD.Hard disk driveE.COM1
After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）A、Replace the second drive with a hot swappable one.B、Swap the drive boot order in the BIOSC、Make the second disk active under the disk management tool.D、Rebuild the array using the hardware RAID tool at boot.
A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?（）A、Optical driveB、Power supplyC、CMOS batteryD、CD-ROM disk
A folder on your Windows 2000 Professional computer contains bitmap files that have been compressed from 2MB to 1MB. You want to copy one of the compressed bitmap files from the hard disk to 1.4-MBfloppy disk. When you attempt to copy， you receive the following error message ‘Destination drive is Full’. What should to do？（）A、Move， rather than copy， the compressed bitmap file to the floppy disk.B、Reformat the floppy disk.Then copy the compressed bitmap file to the floppy disk.C、Use another program to compress the bitmap file before copying it to the floppy disk.D、Copy an empty compressed folder to the floppy disk. Then copy the compressed bitmap file to the folder on the floppy disk.
Which of the following could cause an Inaccessible boot drive error during the boot process? （）A、HDD failureB、DVI failureC、USB failureD、CD failure
A user is trying to boot a desktop PC from their A: drive. Which of the following devices is the userdescribing？（）A、The floppy driveB、The hard driveC、The CD-ROM driveD、The DVD-ROM drive
A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would MOST likely be the cause？（）A、The motherboard was damaged and needs replacing.B、The floppy drive was not reconnected.C、A configuration disk was left in the floppy drive.D、The ribbon cable has been installed incorrectly.
The error ’invalid boot disk’ means：（）A、the BIOS settings are incorrect.B、there is no floppy disk in the drive.C、the computer was unable to make temporary space for the boot process.D、the computer was unable to find the information needed to start the boot process.
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）A、Disk ManagementB、Services and ApplicationsC、Removable StorageD、Device Manager
Which of the following can be used when installing the OS without a boot disk？（）A、ZFSB、VMFSC、PXED、PBX
When attempting to boot a PC, the POST process completes without error. The PC then displays,‘non system disk or disk error’. Which of the following would MOST likely cause the issue?（）A、Out-of-date BIOSB、Invalid motherboard jumper settingsC、Failing power supplyD、Floppy disk in the drive
POST errors in the 17xx range generally indicate （）errors.A、USBB、Floppy disk driveC、MotherboardD、Hard disk driveE、COM1
A technician receives an error message ‘inaccessible boot device’ on their monitor. Which of thefollowing components is causing the issue?（）A、Hard disk drive failureB、NTLDR file is missingC、BIOS is corruptedD、System board failure
QUESTION 14 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to installWindows 7 on the computer by using the DVD installation media and receive the following error message:Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need to ensurethat you can install Windows 7 on the computer by using the DVD installation media. What should you do?（）A、From the BIOS, modify the startup order.B、From the BIOS, enable Pre-Boot Execution Environment (PXE).C、Create an answer file named oobe.xml and place the file on the hard disk drive.D、Create an answer file named autounattend.xml and place the file on the hard disk drive.
You are the desktop administrator for your company. You install Windows XP Professional on a new portable computer that will be used by one of the company's software developers. You test the computer after you complete the installation and find out that the computer functions properly. The computer contains a 6-GB hard disk and a removable 4-GB hard disk. The 6-GB hard disk is configured as drive C, and the removable hard disk is configured as drive D. You install Windows 98 on drive D and deliver the computer to the software developer. The software developer reports that the computer does not start when drive D is not connected. Instead, the computer briefly displays an operating system menu, and then it displays an error message stating that an operating system could not be found. When drive D is connected, the computer starts Windows 98. You need to configure the computer so that it starts Windows XP Professional whether or not drive D is connected. What should you do?（）A、Modify the computer's BIOS so that it automatically detects whether drive D is connected.B、Modify the computer's BIOS so that drive C is first in the computer's boot order. C、Modify the Boot.ini file on the computer by changing the default= entry to the following value: multi(0)disk(0)rdisk(0)partition(1)="Microsoft Windows XP Professional" /fastdetect.D、Modify the Boot.ini file on the computer by changing the entry for Windows 98 to the following value: D: "Microsoft Windows 98" /fastdetect.
Your computer has Windows 2000 Professional installed. Your office has a power outrage while you were running the disk defragmenter utility on your computer. When you start the computer again， you receive the following message： "Bad or missing OS". What should you do？（）A、Start the computer in safe mode and reformat the hard disk.B、Start the computer in the debug mode and reformat the hard disk.C、Start the computer using the ERD and repair the Master Boot Record.D、Start the computer by using the Windows 2000 Professional CD-Rom. Then use recovery console to repair the Master Boot Record.
You have a computer that runs Windows XP Professional. You need to create a floppy disk to start Windows XP Professional on the computer if the start files become corrupt. What should you do?（） A、From the Windows XP Professional computer, run diskcopy.exe /v a:.B、From a computer that runs Windows 98, create a MS-DOS-based startup disk. C、From the Windows XP Professional computer, create an Automated System Recovery (ASR) disk. D、From the Windows XP Professional computer, format a floppy disk. Copy the NTLDR, ntdtetect.com, and boot.ini files to the floppy disk.
单选题The error ’invalid boot disk’ means：（）Athe BIOS settings are incorrect.Bthere is no floppy disk in the drive.Cthe computer was unable to make temporary space for the boot process.Dthe computer was unable to find the information needed to start the boot process.
单选题Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?（）ARandom bluescreen errorBInaccessible boot driveCMissing NTLDRDInvalid boot disk
单选题When attempting to boot a PC, the POST process completes without error. The PC then displays,‘non system disk or disk error’. Which of the following would MOST likely cause the issue?（）AOut-of-date BIOSBInvalid motherboard jumper settingsCFailing power supplyDFloppy disk in the drive