多选题You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）AConfigure Windows 2000 Professional to enable driver signing.BConfigure Windows 2000 Professional to disable driver signing.CStart the computer by using the recovery console， restore the system state data.DStart the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.EStart the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
多选题
You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）
A
Configure Windows 2000 Professional to enable driver signing.
B
Configure Windows 2000 Professional to disable driver signing.
C
Start the computer by using the recovery console， restore the system state data.
D
Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
E
Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
参考解析
解析：
暂无解析
相关考题：
You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）A、Configure Windows 2000 Professional to enable driver signing.B、Configure Windows 2000 Professional to disable driver signing.C、Start the computer by using the recovery console， restore the system state data.D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
You are the administrator of your company’s network. You install Windows 2000 Professional on 10 computers in the graphics department. The 10 computers have built in USB controllers. You physically install a USB tablet pointing device on each computer. You install the 32-bit manufacturer tablets software on each computer. A tablet icon appears in the central panel to configure the device but the device does not work. You want the USB tablets to work on 10 computers. What should you do?（）A、Enable the USB ports in the BIOS and reinstall the USB tablet device drivers.B、Enable the USB root hub controller and reinstall the USB tablet device drivers.C、Disable the USB error detection for the USB root hub controller and enable the USB tablet device in the hardware profile.D、Reinstall the USB device drivers and disable the USB error detection.
You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort. What should you do? （）A、Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver. B、Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one. C、Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI controller driver with the functional one. D、Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional SCSI controller driver into the original system folder, and restart the computer to the previous installation.
You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）A、Start the computer in Safe Mode. Enable driver signing.B、Start the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.C、Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.D、Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.
You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install an ISA-based SCSI adapter in your docking station. You insert your computer into the docking station and start the computer. The SCSI adapter is not detected during the startup process. You start the Add/Remove Hardware wizard. When the wizard process is finished, the SCSI adapter is not listed. You want to allow Windows 2000 Professional to detect the SCSI adapter. What should you do? （）A、Restart the Add/Remover Hardware wizard. Manually add the SCSI adapter drivers.B、Restart the computer in safe mode. Restart the Add/Remove Hardware wizard to detect the SCSI adapter.C、Configure Windows 2000 Professional to use driver signing. Restart the Add/Remove Hardware wizard to detect the SCSI adapter.D、Copy the SCSI adapter drivers to the Winnt/Driver Cache/i386 folder. Restart the Add/Remover Hardware wizard to detect the SCSI adapter.
You install a 16-Bit ISA sound card on your Windows 2000 Professional computer. You install the manufacturer’s device driver for the sound card. You then restart the computer. During the start up process, the computer stops loading and Windows 2000 Professional. You restart the computer, and again the computer stops loading Windows 2000 Professional computer. You start the computer in Safe Mode. What should you do next?（）A、Remove the sound card device driver by enabling driver signing.B、Remove the sound card device driver by disabling driver signing.C、Disable the sound card device driver by using the disable command.D、Disable the sound card device driver by using computer management.
You are the administrator of ExamSheet.net's network. You attempt to install a video driver on a Windows 2000 Professional computer. You receive the following error message: "Error 11 - Cannot install video driver." The driver was originally downloaded from the video card manufacturer's Web site. You have successfully used the driver in the past on other Windows 2000 Professional computers. You want to configure the Windows 2000 Professional computer to check for driver integrity and to allow you to install this video driver. What should you do? （）A、Use the Hardware troubleshooter. Configure the computer to prevent the installation of unsigned drivers. B、Use the Add Hardware wizard to install the driver. Create a Local Computer Policy to enable Windows File ProtectionC、Configure driver signing to ignore File Signature Verification. Create a Local Computer Policy to enable Windows File ProtectionD、Configure theUnsigned driver installation behaviorpolicy setting to beWarn but allow installation
You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）A、When away from the office use Device Manager to remove the adapter. B、When away from the office configure the startup properties for the adapter to be automatic. C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.
You are administering a Windows 2000 Professional， single Pentium II 400Mhz processor computer. You need to install a new accounting software application. The software manufacturer recommends that you use a dual-processor configuration. First， you install a second identical processor in your computer. You need to ensure that you will be able to install the new software. What should you do next？（）A、 Update the HAL to support multiple processors.B、 In Device Manager， disable the direct memory access controller.C、 Use the Add/Remove Hardware Wizard to detect and install the driver for the new processor. D、 Reinstall Windows 2000 Professional to support a multi-processor configuration.
You are the network administrator for ExamSheet. You install a 16-bit ISA sound card on your Windows 2000 Professional computer. You have an unsigned device driver from the manufacturer of the sound card on a floppy disk. You install the device driver for the sound card. You restart the computer. During the startup process, the computer stops loading Windows 2000 Professional. You restart the computer and again the computer stops loading Windows 2000 Professional. You start the computer in safe mode. You want your computer to start properly. What should you do next? （）A、Configure driver signing to prevent the installation of unsigned files.B、On Control Panel selectSounds and Multimedia Devicesto remove the sound card drivers.C、Use Device Manager to disable the sound card device.D、UseSigverif.exeto find and delete all unsigned files.
You purchase a USB board, ISDN terminal adapter for your Windows 2000 Professional portable computer. You plug the device in to the USB port. Plug and Play fails to detect the new device. You test the device on a Windows 2000 Professional desktop computer. You find that plug and play correctly detects the device. You want to resolve the problem so that you can use ISDN terminal adapter on your portable computer. What should you do?（）A、Use the Device Manager to enable the USB manager root hub.B、Use the Device Manager to enable the USB host controller in the current hardware profile.C、Contact the hardware manufacturer to obtain the upgrade for the Plug and Play BIOS.D、Turn off the computer plug in the ISDN terminal host adapter and restart the computer.
You install a new AGP video adapter in your Windows 2000 Professional computer. You install the manufacturer’s device drivers provided with the adapter and reboot your computer to load these drivers. During the startup process， the monitor goes blank and your computer stops responding after that and even does not boot properly. What should you do to solve this problem？ （）A、Start the computer by using Windows 2000 professional CD and then use Emergency Repair Disk. Restore the original adapter driver settingsB、Start the computer in the debug mode. Restore the original adapter driver settingsC、Start the computer in Safe mode. Rename the AGP device by using device managerD、Start the computer by using the recovery console. Rename the AGP driver.
You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）A、Restart the computer in the docking station.B、Run the Add/Remove Hardware wizard.C、Use Device Manager to scan for hardware changes.D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.E、Install the new network adapter driver.
You install Windows 2000 Professional on a new APM-compliant portable computer. You notice that whenever you attempt to shut down the computer, the Windows 2000 shutdown screen remains on the screen as the power remains on. You attempt to shut off the computer by using Power Button, but you want the computer to shut off when Windows 2000 Professional shuts down. What should you do? （）A、Restart the computer, disable APM in the system BIOS, and then restart the computer. B、Restart the computer, use power options in control panel to enable APM, and restart the computer. C、Restart the computer, use power options in control panel to enable hibernate support, and then restart the computer. D、Restart the computer, use power options in control panel to create a different power scheme, and then restart the computer.
You install an updated device for the Zip drive on your Windows 2000 Professional computer. You restart the computer. During the startup process, the computer stops responding. You then restart the computer in safe mode. During the startup process, the computer stops responding again. You suspect the new device driver is causing the problem. You want to resolve the problem so that the computer starts successfully. What should you do?（）A、Use the listsvc command to disable the Zip device driver.B、Use the disable command to disable the Zip device driver.C、Select Recovery Console from the Repair menu.D、Select debug mode from the Windows 2000 Advanced Options menu.E、Insert the Emergency Repair Disk.F、Specify the path to the recovery files on the hard disk.G、Start the computer by using the Windows 2000 Professional CD-ROM.
You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer. Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do? （）A、Start the computer in safe mode. Enable driver signing.B、Start the computer in safe mode. Use Device Manager to remove the SCSI tape device.C、Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.D、Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.
You install a new AGP video adapter in your Windows 2000 Professional Computer. You start the computer and notice that the video display has retained the default setting of 16 color, 640 x 480 resolution. You install the manufacturer’s drivers for the new video adapter. You then restart the computer. During the startup process, the monitor goes blank. After several minutes the screen is still blank. You restart the computer and experience the same problem again. You want to enable Windows 2000 Professional to start successfully. What should you do? （）A、Start the computer in the debug mode. Restore the original adapter driver settings.B、Start the computer in the Safe Mode. Rename the AGP device by using Device Manager.C、Start the computer by using the Recovery Console. Rename the AGP driver.D、Start the computer by using the emergency repair disk. Restore the original driver settings.
You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?（）A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by using the Emergency Repair Disk for the computer.B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback driver from the Windows 2000 Professional CD-ROM.C、Restart the computer by using the last know good configuration.D、Restart the computer in safe mode and reinstall the original network adapter driver. E、Restart the computer and disable Plug and Play in the computer BIOS.
单选题You are administering a Windows 2000 Professional， single Pentium II 400Mhz processor computer. You need to install a new accounting software application. The software manufacturer recommends that you use a dual-processor configuration. First， you install a second identical processor in your computer. You need to ensure that you will be able to install the new software. What should you do next？（）A Update the HAL to support multiple processors.B In Device Manager， disable the direct memory access controller.C Use the Add/Remove Hardware Wizard to detect and install the driver for the new processor. D Reinstall Windows 2000 Professional to support a multi-processor configuration.
单选题You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）AWhen away from the office use Device Manager to remove the adapter. BWhen away from the office configure the startup properties for the adapter to be automatic. CRemove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.DRemove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.
多选题You install an updated device for the Zip drive on your Windows 2000 Professional computer. You restart the computer. During the startup process, the computer stops responding. You then restart the computer in safe mode. During the startup process, the computer stops responding again. You suspect the new device driver is causing the problem. You want to resolve the problem so that the computer starts successfully. What should you do?（）AUse the listsvc command to disable the Zip device driver.BUse the disable command to disable the Zip device driver.CSelect Recovery Console from the Repair menu.DSelect debug mode from the Windows 2000 Advanced Options menu.EInsert the Emergency Repair Disk.FSpecify the path to the recovery files on the hard disk.GStart the computer by using the Windows 2000 Professional CD-ROM.
单选题You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort. What should you do? （）ARestart the computer in Safe Mode. Reinstall the functional SCSI controller driver. BRestart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one. CStart the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI controller driver with the functional one. DInstall a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional SCSI controller driver into the original system folder, and restart the computer to the previous installation.
单选题You install Windows 2000 Professional on a new APM-compliant portable computer. You notice that whenever you attempt to shut down the computer, the Windows 2000 shutdown screen remains on the screen as the power remains on. You attempt to shut off the computer by using Power Button, but you want the computer to shut off when Windows 2000 Professional shuts down. What should you do? （）ARestart the computer, disable APM in the system BIOS, and then restart the computer. BRestart the computer, use power options in control panel to enable APM, and restart the computer. CRestart the computer, use power options in control panel to enable hibernate support, and then restart the computer. DRestart the computer, use power options in control panel to create a different power scheme, and then restart the computer.
多选题You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）ARestart the computer in the docking station.BRun the Add/Remove Hardware wizard.CUse Device Manager to scan for hardware changes.DCopy the network adapter driver to the Winnt/Driver Cache/i386 folder.EInstall the new network adapter driver.
多选题You install a Zip device on your Windows 2000 Professional computer. You reboot your computer only to find out that the computer does not respond at all. You reboot into Safe Mode， and again， the computer does not respond. How do you recover from this problem？（）AUse the listsvc command to disable the Zip device driverBSelect Recovery Console from the Recovery Menu.CUse the disable command to disable the Zip device driverDSelect the Debug mode from the Windows 2000 Advanced Options menuEInsert the Emergency Repair Disk and specify the path of the recovery file on the hard diskFStart the computer using the Windows 2000 Professional CD-ROM.
单选题You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install an ISA-based SCSI adapter in your docking station. You insert your computer into the docking station and start the computer. The SCSI adapter is not detected during the startup process. You start the Add/Remove Hardware wizard. When the wizard process is finished, the SCSI adapter is not listed. You want to allow Windows 2000 Professional to detect the SCSI adapter. What should you do? （）ARestart the Add/Remover Hardware wizard. Manually add the SCSI adapter drivers.BRestart the computer in safe mode. Restart the Add/Remove Hardware wizard to detect the SCSI adapter.CConfigure Windows 2000 Professional to use driver signing. Restart the Add/Remove Hardware wizard to detect the SCSI adapter.DCopy the SCSI adapter drivers to the Winnt/Driver Cache/i386 folder. Restart the Add/Remover Hardware wizard to detect the SCSI adapter.
多选题You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?（）APerform an emergency repair of the system from the Windows 2000 Professional CD-ROM by using the Emergency Repair Disk for the computer.BRestart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback driver from the Windows 2000 Professional CD-ROM.CRestart the computer by using the last know good configuration.DRestart the computer in safe mode and reinstall the original network adapter driver.ERestart the computer and disable Plug and Play in the computer BIOS.