单选题Company.com wants to reassign a host bus adapter （HBA） from one partition to another to handle increased I/O workload on that partition. What needs to be done to dynamically move the card？（）AUse the rmdev command to remove the card from the current partition before doing the DLPAR process.BTake the source partition down and do the DLPAR function on the target partition.CAssign the card to the required section of the target partition and run cfgmgr.DDynamically remove the card from the source and add to target profile then reactivate the target profile.
单选题
Company.com wants to reassign a host bus adapter （HBA） from one partition to another to handle increased I/O workload on that partition. What needs to be done to dynamically move the card？（）
A
Use the rmdev command to remove the card from the current partition before doing the DLPAR process.
B
Take the source partition down and do the DLPAR function on the target partition.
C
Assign the card to the required section of the target partition and run cfgmgr.
D
Dynamically remove the card from the source and add to target profile then reactivate the target profile.
参考解析
解析：
暂无解析
相关考题：
You‘re the systems administrator at Testing, and you create the following access control lists.You then enter the command ip access-group 101 in to apply access control list 101 to router TK1s e0 interface.Which of the following Telnet sessions will be blocked as a result of your access lists?（）A. Telnet sessions from host A to host 5.1.1.10B. Telnet sessions from host A to host 5.1.3.10C. Telnet sessions from host B to host 5.1.2.10D. Telnet sessions from host B to host 5.1.3.8E. Telnet sessions from host C to host 5.1.3.10F. Telnet sessions from host F to host 5.1.1.10
The access control list shown in the graphic has been applied to the Ethernet interface of router R1using the ip access-group 101 in command.Which of the following Telnet sessions will be blocked by this ACL？（）A.from host PC1 to host 5.1.1.10B.from host PC1 to host 5.1.3.10C.from host PC2 to host 5.1.2.10D.from host PC2 to host 5.1.3.8
A small organization is purchasing a POWER5 to consolidate four applications. Currently， each application has two Host Bus Adapters （HBA） connected to an Enterprise Storage Server （ESS）. The customer is concerned about the cost of purchasing eight new HBAs. Which feature of virtualization will be most beneficial to this organization？（）A、Virtual EthernetB、Micro-PartitioningC、Virtual I/O ServerD、Capped and uncapped partitions
Company.com has installed and configured a VIO server utilizing a Shared Ethernet Adapter and is investigating some network performance issues visible on the clients. The customer wants to understand the total network connectivity from the clients out to the data center routers. Which of the following commands will identify the Shared Ethernet Adapter mapping？（）A、ifconfig -aB、netstat -nrC、lsmap -all -netD、lsdev -Cc adapter
A customer has a failing HBA adapter and needs to identify the location of the adapter. Which of the following AIX commands should the specialist recommend the customer review？（）A、rmdevB、chdevC、drslotD、cfgmgr
A FastT Host FC-2 bus adapter， a U320 SCSI adapter， and three 10/100Mb Ethernet adapters have to be installed as optimally as possible. This is going to be a 24X7 system. The addition of extra PCI-cards is a major consideration as well. Based on the following， what is the best configuration？（） （1）Slot 1 66MHz Bus 1 （2）Slot 2 66MHz Bus 1 （3）Slot 3 100MHz Bus 2 （4）Slot 4 100Mhz Bus 2 （5）Slot 5 133Mhz Bus 3 （6）Slot 6 133Mhz Bus 3A、Put the Ethernet adapters in slots 1， 2 and 3. Put the FastT HBA in slot 5. Put the U320 adapter in slot 6.B、Put the Ethernet adapters in slots 1， 4 and 6. Put the FastT HBA in slot 5. Put the U320 adapter in slot 3.C、Put the Ethernet adapters in slots 1， 2 and 4. Put the FastT HBA in slot 3. Put the U320 adapter in slot 5.D、Put the Ethernet adapters in slots 1， 2 and 3. Put the FastT HBA in slot 5. Put the U320 adapter in slot 4
The administrator of a Power 595 server is required to concurrently host LPARs for two different customers. Both customers’ LPARs have the same VLAN ID and subnet range， but their traffic must be isolated from each other. Which feature within the system would provide this functionality？（）A、 802.1QB、 Virtual switchC、 Logical Host Ethernet （LHE） AdapterD、 Shared Ethernet Adapter （SEA） Trunking
Company.com has a VIO server with a configured virtual Ethernet adapter and a physical Ethernet adapter with an IP address on their local public network. They want to re-configure the physical Ethernet adapter as Shared Ethernet Adapter. When the mkvdev command is run， the following method error is returned： /usr/lib/methods/cfgsea . Which of the following will most likely resolve the problem？（）A、Run cfgdev on the VIO server and re-run the mkvdev command.B、Run chdev -a sea_enable=yes on the physical Ethernet adapter.C、Remove and re-add the virtual Ethernet adapter.D、Remove the IP address from the physical adapter and re-run the mkvdev command.
A customer wants to directly attach five servers to an IBM System Storage DS8100. They do not intend to use any SAN switches and would like the servers to have a redundant connection to the IBM DS8100. What is the minimum number of DS8000 host adapter cards that the customer will require（）A、2B、4C、6D、8
You are designing a Windows Server 2008 R2 Hyper-V virtualization environment. Your host servers must have the following elements： A dedicated management network adapter.A dedicated virtual network for child iSCSI network traffic.A dedicated virtual network for child network traffic with VLAN tagging. You need to choose adapters that minimize the host server processing. Which adapters should you choose？（）A、three network adapters that support 802.1pB、two network adapters that support 802.1q， and one iSCSI host bus adapterC、two network adapters that support 802.1p， and one network adapter that supports TCP ChimneyD、two network adapters that support 802.1q， and one network adapter that supports Jumbo frames
You work as the enterprise exchange administrator at Company.com.The Company.com network consists of a single Active Directory domain named Company.com.Company.com has an Exchange Server 2010 organization.the Company.com contains an exchange server 2010 mailbox server named -ex20 that contains a mailbox database.a Company.com manager wants the see the last logon time of the employees at Company.com. What should you do？（）A、The best option is to run the Get-MailboxDatabase from the Exchange Management Shell.B、The best option is to run the Get-MailboxStatistics from the Exchange Management Shell.C、The best option is to create and export a filter from the Exchange Management Console.D、The best option is to run the Remote Connectivity Analyzer from the Exchange Management Console.
You have a Windows Server 2008 R2 Hyper-V server with two network adapters named Adapter1 and Adapter2. You need to configure the server to host virtual machines （VMs） on different networks. Which two actions should you perform on the host server？（）A、Set Adapter1 as a management interface.B、Configure Adapter1 to support jumbo frames.C、Set Adapter2 in Trunk mode， and configure VM VLAN tags.D、Disable TCP Chimney support on Adapter2， and configure VM VLAN tags.
You are designing a Windows Server 2008 R2 Hyper-V environment. Your design includes a failover cluster that supports live migration. You need to ensure that the network supports this design. What should you do？（）A、Use two iSCSI host bus adaptersB、Use two Fibre Channel host bus adaptersC、Place the physical host servers on the same TCP/IP subnetD、Place the physical host servers on different TCP/IP subnets
Your virtual environment includes several Windows Server 2008 R2 Hyper-V servers. Some servers have 16 GB of RAM， and some servers have 32 GB of RAM. Each server has a dedicated management network adapter. Several virtual machines （VMs） are configured on local disk arrays. You plan to enable live migration between all Hyper-V host servers. Your plan must optimize the environment for live migration and enable the live migration of all VMs among all servers. You need to specify the components to add or upgrade. What should you do？（）A、On each Hyper-V host server， provision additional disk resources on the local storage volumes. Add a second network adapter to each host server， and assign this network adapter to a local switchB、On each Hyper-V host server， provision additional disk resources on shared storage volumes. Add a second network adapter to each host server， and assign this network adapter to a local switchC、On each Hyper-V host server， provision additional disk resources on the local storage volumes. Install additional RAM as necessary so that all host servers have the same amount of RAMD、Install additional RAM as necessary so that all host servers have the same amount of RAM. Add a second network adapter to each host server， and assign this network adapter to a local switch
Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）A、The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. B、The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. C、The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. D、The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.
Which of the following hardware components is necessary for a server to access data directly on afiber channel based SAN？（）A、Gigabit NICB、RAID controller cardC、SATA controller cardD、Host bus adapter
单选题Company.com wants to put two Micro-Partitions on a p5-570 and attach to a SAN. What is the best LPAR configuration to maximize SAN availability using four Host Bus Adapters （HBAs）？（）ATwo HBAs assigned to each redundant VIOS which provides VSCSI access to LUNsBTwo HBAs assigned to each LPAR with each LPAR owning HBAs on the same PCI bussesCTwo HBAs assigned to each LPAR with each LPAR owning HBAs on separate PCI bussesDOne HBA assigned to each LPAR and two HBAs assigned to a VIOS providing VSCSI access to LUNs
单选题The administrator of a Power 595 server is required to concurrently host LPARs for two different customers. Both customers’ LPARs have the same VLAN ID and subnet range， but their traffic must be isolated from each other. Which feature within the system would provide this functionality？（）A 802.1QB Virtual switchC Logical Host Ethernet （LHE） AdapterD Shared Ethernet Adapter （SEA） Trunking
单选题A customer wants to directly attach five servers to an IBM System Storage DS8100. They do not intend to use any SAN switches and would like the servers to have a redundant connection to the IBM DS8100. What is the minimum number of DS8000 host adapter cards that the customer will require（）A2B4C6D8
单选题You are designing a Windows Server 2008 R2 Hyper-V Virtualization environment. Your host servers must have the following elements： - A dedicated management network adapter. - A dedicated virtual network for child iSCSI network traffic. - A dedicated virtual network for child network traffic with VLAN tagging. You need to choose adapters that minimize the host server processing. Which adapters should you choose？（）ATwo network adapters that support 802.1p， and one iSCSI host bus adapterBTwo network adapters that support 802.1p， and one network adapter that supports TCP ChimneyCTwo network adapters that support 802.lq， and one network adapter that supports Jumbo framesDThree network adapters that support 802. 1p
单选题Company.com wants to reassign a host bus adapter （HBA） from one partition to another to handle increased I/O workload on that partition. What needs to be done to dynamically move the card？（）AUse the rmdev command to remove the card from the current partition before doing the DLPAR process.BTake the source partition down and do the DLPAR function on the target partition.CAssign the card to the required section of the target partition and run cfgmgr.DDynamically remove the card from the source and add to target profile then reactivate the target profile.
单选题A technical specialist has installed a Host Bus Adapter （HBA） on a p5-550 server. The system has four AIX 5L V5.3 partitions and a Virtual I/O server. The HBA will be used to connect all four partitions to a DS8000 storage array. What else must be performed to make the storage available to the partitions？（）AAllocate the HBA to a client partition.BRestart the Virtual I/O Server to detect the changes.CInstall the device driver for the DS8000 in each of the four AIX partitions.DAllocate the HBA to the VIO server partition and install necessary drivers.
单选题The customer brings their mini-tower and a new DVD/RW drive they want installed. The technician finds a second hard drive in an empty 5.25 bay connected to the secondary bus and jumpered as a slave. The ribbon cable will not stretch from the primary hard drive to the open 5.25 inch bay. Which of the following is the BEST solution?（）AConnect the new DVD drive as the primary on the secondary bus and leave the old CD drive disconnected.BMove the secondary hard drive next to the primary hard drive and connect to the primary bus. Connect the new DVD drive as the slave on the secondary bus.CMove the secondary hard drive from the secondary to the primary bus and then reformat the hard drive after rebooting then reassign the drive letters in disk management prior to installing the new DVD drive on the secondary bus.DMove the secondary hard drive to the bay and then connect it to the primary bus. Connect themini-tower and the new DVD drive as the master on the secondary bus.
单选题Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）AThe Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. BThe Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. CThe Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. DThe Virtual IO adapters are represented as adapter devices with the virtual host bridge as their parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.
单选题You work as the enterprise exchange administrator at Company.com.The Company.com network consists of a single Active Directory domain named Company.com.Company.com has an Exchange Server 2010 organization.the Company.com contains an exchange server 2010 mailbox server named -ex20 that contains a mailbox database.a Company.com manager wants the see the last logon time of the employees at Company.com. What should you do？（）AThe best option is to run the Get-MailboxDatabase from the Exchange Management Shell.BThe best option is to run the Get-MailboxStatistics from the Exchange Management Shell.CThe best option is to create and export a filter from the Exchange Management Console.DThe best option is to run the Remote Connectivity Analyzer from the Exchange Management Console.
单选题You have a server that runs Windows Server 2008. The server has the Windows Server virtualization role service installed. You create a new virtual machine and perform an installation of Windows Server 2008 on the virtual machine. You configure the virtual machine to use the physical network card of the host server. You notice that you are unable to access network resources from the virtual machine. You need to ensure that the virtual host can connect to the physical network. What should you do？（）AOn the host server， install the MS Loopback adapter.BOn the host server， enable the Multipath I/O feature.COn the virtual machine， install the MS Loopback adapter.DOn the virtual machine， install Windows Server virtualization Guest Integration Components.
单选题Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape. Which of the following actions will enable the creation of the partitions with minimal intervention？（）AInstall a VIO partition to share the tape drive.BPurchase three external SCSI adapters and physically move the tape drive when needed.CCreate the partition definitions with the SCSI adapter as a desired resource and use DLPAR commands to move the tape drive.DCreate the partition definitions with the SCSI adapter as a required resource for all partitions and use DLPAR commands to move the tape drive.
单选题Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows： Fibre Channel Card 01 - partition one - required Fibre Channel Card 02 - partition one - required SCSI adapter 01 - partition one - desired IDE adapter 01 - partition one - required Ethernet adapter 01 - partition one - required Ethernet adapter 01 - partition two - required SCSI adapter 02 - partition two - required IDE adapter 01 - partition two - desired Which of the following actions will enable the installation of the AIX image？（）AChange the IDE adapter from desired to required in partition two and restart the partition to release the resource.BPurchase a SCSI DVD-ROM drive to connect to the SCSI adapter in partition two.CPurchase an LTO tape drive so that a system image backup can be created to install a new AIX partition.DChange the IDE adapter from required to desired in partition one and restart the partition to release the resource.