单选题In a three-disk volume group, a disk was physically removed from the system without performing any software procedures to properly remove the disk. Which of the following commands should be performed to recover from this error?（）AextendvgBcfgmgrCreducevgDvaryoffvg
单选题
In a three-disk volume group, a disk was physically removed from the system without performing any software procedures to properly remove the disk. Which of the following commands should be performed to recover from this error?（）
A
extendvg
B
cfgmgr
C
reducevg
D
varyoffvg
参考解析
解析：
暂无解析
相关考题：
There is the possibility that hdisk1 in the root volume group is going bad. A decision has been made to replace the disk. After saving all of the data from the disk and unmounting any filesystems on the disk, which of the following commands should be run before removing the disk from the system?（）A.chgv -a n hdisk rootvg; rmdev -1 hdisk1 -dB.rmdev -1 hdisk1 -d; reducevg -df rootvg hdisk1C.reducevg -df rootvg hdisk1; rmdev -1 hdisk1 -dD.reducevg -df rootvg hdisk1; rmdev -1 hdisk1
In a three-disk volume group, a disk was physically removed from the system without performing any software procedures to properly remove the disk. Which of the following commands should be performed to recover from this error?（）A.extendvgB.cfgmgrC.reducevgD.varyoffvg
During an attempt to mount filesystems on the datavg volume group, the following error message occurs: "0506-323 Cannot get information about log device loglv00." The error is due to the fact that the jfslog used by these filesystems is located on a bad disk. Which of the following procedures should be performed to fix the error?（）A.Run fsck on all filesystems using loglv00B.Run the logform command against loglv00C.Recreate the filesystems and resotre form a backupD.Create a enw jfslog and change /etc/filesystems to point to this log
Which of the following procedures should occur before removing a failing disk from a volume group?() A.Veryoff the volume groupB.Unmount any filesystems on the diskC.Remove all physical partitions on the diskD.Unmount mirrored filesystems from the disk
Which of the following procedures should occur before removing a failing disk from a volume group?（）A、Veryoff the volume groupB、Unmount any filesystems on the diskC、Remove all physical partitions on the diskD、Unmount mirrored filesystems from the disk
A system administrator has a failed disk drive that is mirrored to another disk drive. They successfully removed the logical volume copies off of the failed disk drive. Which of the following commands should be used to remove the failed disk drive from the volume group？（）A、chvgB、rmdevC、reducevgD、exportvg
An SSA disk that is part of the mirrored volume group needs to be replaced. Which of the following procedures should be performed before the disk is physically able to be replaced?（）A、reducevg, rmdev, syncvg B、rmlvcopy, exportvg, rmdev C、rmlvcopy, reducevg, rmdev D、No action is required since SSA is a Hot Swap device and is mirrored
In a three-disk volume group, a disk was physically removed from the system without performing any software procedures to properly remove the disk. Which of the following commands should be performed to recover from this error?（）A、extendvgB、cfgmgrC、reducevgD、varyoffvg
During an attempt to mount filesystems on the datavg volume group, the following error message occurs: "0506-323 Cannot get information about log device loglv00." The error is due to the fact that the jfslog used by these filesystems is located on a bad disk. Which of the following procedures should be performed to fix the error?（）A、Run fsck on all filesystems using loglv00B、Run the logform command against loglv00C、Recreate the filesystems and resotre form a backupD、Create a enw jfslog and change /etc/filesystems to point to this log
A system was running properly until a reboot. Following the reboot， the system LED displayed cycles between 0223 and 0229. Which of the following procedures should be performed next？（）A、Power down then power up the systemB、Boot into diagnostic mode and run fsckC、Boot from installation media and run bosbootD、Boot into maintenance mode and check the bootlist
There is the possibility that hdisk1 in the root volume group is going bad. A decision has been made to replace the disk. After saving all of the data from the disk and unmounting any filesystems on the disk, which of the following commands should be run before removing the disk from the system?（）A、chgv -a n hdisk rootvg; rmdev -1 hdisk1 -dB、rmdev -1 hdisk1 -d; reducevg -df rootvg hdisk1C、reducevg -df rootvg hdisk1; rmdev -1 hdisk1 -dD、reducevg -df rootvg hdisk1; rmdev -1 hdisk1
A system administrator needs to replace a mirrored disk. After performing the proper removal process and replacing the disk, which of the following set of commands should be performed to bring the disk back into production?（）A、 reboot, mklvcopy, syncvg B、 cfgmgr -vl ssar, chvg -va, syncvg C、 cfgmgr, extendvg, syncvg D、 extendvg, mklvcopy, syncvg
A system administrator’s daily monitoring has revealed a failing disk drive. The drive that is failing， hdisk0， is a lvm mirrored drive. What is the first step that should be taken in order to physically replace this drive？（）A、Remove the physical volume from the system.B、Remove the physical volume from the volume group.C、Remove the physical partitions from the volume group.D、Remove the logical volume copies from the failing drive.
Error log analysis indicates that a disk is starting to fail and will need to be replaced. The failing disk contains multiple logical volumes which span multiple disks. A free disk has been added to the failing disk’s volume group.Which of the following is the most efficient method to move the data from the failing disk to the new disk？（）A、Back up the data， remove the failing disk from the volume group， then restore the data to the new disk.B、Use the migratepv command to move data from one disk to another and then remove the failing disk from the volume group.C、Use the mirrorvg command to mirror the data to the new disk， break the mirror and then remove the failing disk from the volume group.D、Create a new filesystem on the new disk and use the mv command to move the data to the new filesystem， and then remove the failing disk from the volume group.
A client needs more disk space for another volume group and has decided to use hdisk12 from the uservg volume group containing hdisk10， hdisk11， and hdisk12 where hdisk10 and hdisk11 have sufficient PPs to contain the volume group data. The client attempted to remove hdisk12 from the volume group but received the following error： 0516-016 Cannot delete physical volume with allocated partitions. Which of the following commands should be run to correct this problem（）A、reducevg hdisk12B、rmdev -dl hdisk12C、cplv hdisk10 hdisk12D、migratepv hdisk12 hdisk10
During a system boot, an error message appears concerning a paging space, paging00. The paging space was located on hdisk2, but the disk was removed from the system without proper software procedures. Which of the following commands should be used as the first step in the process of recovery?（）A、mkps paging00 hdisk0B、chpv -v r hdisk2C、chps -a n paging00D、reducevg rootvg hdisk2
单选题There is the possibility that hdisk1 in the root volume group is going bad. A decision has been made to replace the disk. After saving all of the data from the disk and unmounting any filesystems on the disk, which of the following commands should be run before removing the disk from the system?（）Achgv -a n hdisk rootvg; rmdev -1 hdisk1 -dBrmdev -1 hdisk1 -d; reducevg -df rootvg hdisk1Creducevg -df rootvg hdisk1; rmdev -1 hdisk1 -dDreducevg -df rootvg hdisk1; rmdev -1 hdisk1
单选题A client needs more disk space for another volume group and has decided to use hdisk12 from the uservg volume group containing hdisk10， hdisk11， and hdisk12 where hdisk10 and hdisk11 have sufficient PPs to contain the volume group data. The client attempted to remove hdisk12 from the volume group but received the following error： 0516-016 Cannot delete physical volume with allocated partitions. Which of the following commands should be run to correct this problem（）Areducevg hdisk12Brmdev -dl hdisk12Ccplv hdisk10 hdisk12Dmigratepv hdisk12 hdisk10
单选题Which of the following procedures should occur before removing a failing disk from a volume group?（）AVeryoff the volume groupBUnmount any filesystems on the diskCRemove all physical partitions on the diskDUnmount mirrored filesystems from the disk
单选题An SSA disk that is part of the mirrored volume group needs to be replaced. Which of the following procedures should be performed before the disk is physically able to be replaced?（）Areducevg, rmdev, syncvg Brmlvcopy, exportvg, rmdev Crmlvcopy, reducevg, rmdev DNo action is required since SSA is a Hot Swap device and is mirrored
单选题During a system boot, an error message appears concerning a paging space, paging00. The paging space was located on hdisk2, but the disk was removed from the system without proper software procedures. Which of the following commands should be used as the first step in the process of recovery?（）Amkps paging00 hdisk0Bchpv -v r hdisk2Cchps -a n paging00Dreducevg rootvg hdisk2
单选题In a three-disk volume group, a disk was physically removed from the system without performing any software procedures to properly remove the disk. Which of the following commands should be performed to recover from this error?（）AextendvgBcfgmgrCreducevgDvaryoffvg
单选题A system administrator’s daily monitoring has revealed a failing disk drive. The drive that is failing， hdisk0， is a lvm mirrored drive. What is the first step that should be taken in order to physically replace this drive？（）ARemove the physical volume from the system.BRemove the physical volume from the volume group.CRemove the physical partitions from the volume group.DRemove the logical volume copies from the failing drive.
单选题A system was running properly until a reboot. Following the reboot， the system LED displayed cycles between 0223 and 0229. Which of the following procedures should be performed next？（）APower down then power up the systemBBoot into diagnostic mode and run fsckCBoot from installation media and run bosbootDBoot into maintenance mode and check the bootlist
单选题During an attempt to mount filesystems on the datavg volume group, the following error message occurs: "0506-323 Cannot get information about log device loglv00." The error is due to the fact that the jfslog used by these filesystems is located on a bad disk. Which of the following procedures should be performed to fix the error?（）ARun fsck on all filesystems using loglv00BRun the logform command against loglv00CRecreate the filesystems and resotre form a backupDCreate a enw jfslog and change /etc/filesystems to point to this log
单选题A system administrator has a failed disk drive that is mirrored to another disk drive. They successfully removed the logical volume copies off of the failed disk drive. Which of the following commands should be used to remove the failed disk drive from the volume group？（）AchvgBrmdevCreducevgDexportvg
单选题Error log analysis indicates that a disk is starting to fail and will need to be replaced. The failing disk contains multiple logical volumes which span multiple disks. A free disk has been added to the failing disk’s volume group.Which of the following is the most efficient method to move the data from the failing disk to the new disk？（）ABack up the data， remove the failing disk from the volume group， then restore the data to the new disk.BUse the migratepv command to move data from one disk to another and then remove the failing disk from the volume group.CUse the mirrorvg command to mirror the data to the new disk， break the mirror and then remove the failing disk from the volume group.DCreate a new filesystem on the new disk and use the mv command to move the data to the new filesystem， and then remove the failing disk from the volume group.
单选题A system administrator needs to replace a mirrored disk. After performing the proper removal process and replacing the disk, which of the following set of commands should be performed to bring the disk back into production?（）A reboot, mklvcopy, syncvg B cfgmgr -vl ssar, chvg -va, syncvg C cfgmgr, extendvg, syncvg D extendvg, mklvcopy, syncvg