You configure your Windows 2000 Professional computer for Internet Connection Sharing and for TCP/IP filtering as shown in the exhibit.You test your TCP/IP filtering configuration from another client computer. You can access web sites, but you cannot access FTP sites.What should you do to be able to access FTP sites?A．Add Port 21 to the TCP Ports section.B．Add Port 138 to the TCP Ports section.C．Add Port 21 to the IP Ports section.D．Add Port 138 to the IP Ports section.
You configure your Windows 2000 Professional computer for Internet Connection Sharing and for TCP/IP filtering as shown in the exhibit.
You test your TCP/IP filtering configuration from another client computer. You can access web sites, but you cannot access FTP sites.
What should you do to be able to access FTP sites?
A．Add Port 21 to the TCP Ports section.
B．Add Port 138 to the TCP Ports section.
C．Add Port 21 to the IP Ports section.
D．Add Port 138 to the IP Ports section.
相关考题：
You have a computer that runs Windows Vista.You connect to your company’s network by using a virtual private network (VPN) connection. You notice that when you establish the VPN connection, you are unable to access Internet Web sites. When you disconnect the VPN connection, you can access Internet Web sites.You need to access Internet Web sites while you are connected to the VPN connection.What should you do?（）A.AB.BC.CD.D
You are the network administrator for Company. Your network is a native mode Windows 2000 domain consisting of 50 Windows 2000 Professional client computers and six Windows 2000 Server computers. There are no routers on the network. The client computers have been configured for dynamic IP address application. The network is configured as shown in the Network Diagram. A user reports that she cannot connect to the server named ES1 from her client computer named Workstation5. When she attempts to browse //ES1 from the Run line she receives the message, “The network path was not found”. No other users are reporting problems connecting to ES1. From the user’s computer, you browse //192.168.72.6 from the Run line and successfully connect to the server. You run the ipconfig /all command. The relevant results are shown in the following table. You want the user to be able to access resources on ES1 by using the computer name. What should you do? （）A、On the Internet Protocol (TCP/IP) Properties, sheet, select the Obtain DNS server address automatically option.B、On the Internet Protocol (TCP/IP) Properties, sheet, select the Obtain an IP address automatically option. C、Configure the client computer with a default gateway of 192.168.0.1.D、Configure the client computer with a subnet mask of 255.255.0.0.E、Configure the client computer with a WINS server of 192.168.72.5.
You have a computer that runs Windows 7. You connect to your company s network by using a VPNconnection. You discover that when you establish the VPN connection, you are unable to access InternetWeb sites. When you disconnect the VPN connection, you can access Internet Web sites. You need toaccess Internet Web sites while you are connected to the VPN. What should you do?（）A、Configure the VPN connection to use only PPTP.B、Configure the VPN connection to use only L2TP/IPSec.C、From the Internet Protocol Version 4 （TCP/IPv4） properties of the local area connection， disable theAutomatic metric setting.D、From the Internet Protocol Version 4 （TCP/IPv4） properties of the VPN connection， disable the Usedefault gateway on remote network setting.
You use a Windows 2000 Professional portable computer both at the office and at home. In the office youconnect the portable computer to a docking station and use Internet Explorer to access the Internetthrough your LAN connection.At home， you configure a new dial-up connection to the Internet. Now when you attempt to access theInternet from the office you are prompted to connect via your dial-up connection. When you cancel thismessage， you can only work offline and cannot access the Internet.You want to maintain your dial-up connection for home use and your ability to access the Internet whenconnected to the company LAN. What should you do？（）A、Reconfigure the dial-up connection to dial-up to a private network.B、Create another connection that uses a virtual private network （VPN） to connect to a privatenetwork though the Internet.C、Configure Internet Explorer to automatically detect proxy settings.D、Configure Internet Explorer to dial whenever a network connection is not present.
Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）A、The bindings.B、A DNS address.C、A Gateway address.D、A WINS server address.E、A DHCP server address.
You configure parental controls on your computer for your childs user account. Your child logs on with a different account and is able to access inappropriate Web sites. You need to ensure that your child cannot access inappropriate Web sites. What should you do？ （）A、Enable Microsoft Windows Firewall.B、Disable the default administrator account.C、Use password protection for all user accounts.D、Configure Web sites you approve of in the list of Trusted Sites of Microsoft Windows Internet Explorer.
You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）A、Configure a HOSTS file.B、Configure a LMHOSTS file.C、Configure a WINS server database.D、Configure a DHCP server address.E、Configure at least one DNS address.
You are the administrator of ExamSheet.net's network. ExamSheet upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings so that IP and DNS addresses are obtained automatically. When you restart the computer you cannot access the network. When you attempt toPINGaddress 127.0.0.1 you receive the following error message: "Request timed out." You want this computer to communicate on the network. What should you do?（）A、Configure IP address settings manually.B、Replace the network adapter.C、Disable TCP/IP filtering for all network adapters.D、Configure DNS server address settings manually.E、Enable IEEE 802.1x authentication.
You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）A、Enable DHCP in the TCP/IP properties.B、Replace the Token Ring network adapter with an Ethernet network adapter.C、Configure a different TCP/IP address on the same subnet.D、Configure a valid DNS Server in the TCP/IP properties.
You are creating a shared Internet connection on your Windows 2000 Professional computer. You want to enable other computers on the LAN to be able to access only HTTP and FTP sites on the Internet. What should you do?（）A、Configure your shared Internet connection to disable LCP extensions.B、Configure you shared Internet connection to disable on-demand dialing.C、Create an Internet Connection Sharing application type for HTTP to use remote server port 25.D、Create an Internet Connection Sharing application type for HTTP to use remote server port 80.E、Create an Internet Connection Sharing application type for FTP to use remote server port 21.F、Create an Internet Connection Sharing application type for FTP to use remote server port 72.
You use a Windows 2000 Professional portable computer both at the office and at home. In the office you connect the portable computer to a docking station and use Internet Explorer to access the Internet through your LAN connection. At home, you configure a new dial-up connection to the Internet. Now when you attempt to access the Internet from the office you are prompted to connect via your dial-up connection. When you cancel this message, you can only work offline and cannot access the Internet. You want to maintain your dial-up connection for home use and your ability to access the Internet when connected to the company LAN. What should you do?（）A、Reconfigure the dial-up connection to dial-up to a private network.B、Create another connection that uses a virtual private network （VPN） to connect a private network though the Internet.C、Configure Internet Explorer to automatically detect proxy settings.D、Configure Internet Explorer to dial whenever a network connection is not present.
You want to configure your Windows 2000 Professional computer to remotely access your company's Windows 2000 Routing and Remote Access server. You configure a VPN connection. For security purposes, you configure the VPN connection to use MS-CHAP v2 only and to require encryption. You also configure TCP/IP to obtain an IP address automatically, to enable IPSec, and to set IPSec to Secure Server. When you try to connect, you receive the following error message, "The encryption attempt failed because no valid certificate was found." What should you do to connect to the server? （）A、Enable the VPN connection to use MS-CHAP.B、Change the data encryption setting toOptional Encryption.C、Specify a TCP/IP address in theNetworkproperties.D、Change the IPSec policy setting toClient.
You want to connect to your company network from your Windows 2000 Professional computer at home. You have an ISDN line that is used for internet connectivity. You create a VPN connection and are able to connect successfully to the company network. While connected to the company network, you are unable to access the Internet. What must you do so that you can access the Internet?（）A、Configure the ISDN connection to use SLIP instead of PPP.B、Select the Enable Internet Connection Sharing for this connection check box in the ISDN connection properties.C、Clear the Use default gateway on remote network check box.D、Install and configure the SAP Agent service.
You are able to access a Web server from your computer by using the IP address of the Web server. You fail to access the Web server when you use its fully qualified domain name. Other users on your network can access the Web server by using both the IP address and the fully qualified domain name. You need to access the Web server by using the fully qualified domain name. What should you do？ （）A、Use the Diagnose and repair feature in the Network and Sharing Center.B、At the command prompt， type ipconfig /allcompartments.C、Disable the NetBIOS feature on your network adapter.D、Configure the correct default gateway on the Alternate Configuration tab of your network connection properties dialog box.
You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter. Your computer is able to access the Internet but is unable to discover other computers in the local wireless network. You need to configure the wireless connection to allow your computer to discover other computers. What should you do？（）A、Configure the network category of your wireless network connection to Private.B、Configure the network category of your wireless network connection to Public.C、Configure the TCP/IP packet filtering on the wireless network connection.D、Configure the wireless network connection with the appropriate authentication to the router.
Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）A、Configure a different TCP/IP addressB、Enable DHCP in the TCP/IP propertiesC、Enable DNS in the TCP/IP propertiesD、Configure the network adapter to run at 100 Mbps onlyE、Replace the network adapter.
You use a Windows 2000 Professional computer at home. You need to access shared files on a server named server1. This server is on your company’s network and is not accessible from the Internet. Your company’s network also includes a third party VPN server that is accessible from the Internet. You dial in to your Internet service provider and then create a VPN connection to your company’s VPN server. After the connection is successfully established， you run the net view //server1 command and receive the following error ‘the server is inaccessible or could not be found’. You need to access the shared files on server 1. What should you do？（）A、Stop and then start the TCP/IP NetBIOS helper service on your computer.B、Stop and then start the DNS client service on your computer.C、Add a HOSTS entry for server1 to your computer.D、Add a LMHOSTS entry for server1 to your computer.
You install Windows 2000 Professional on your portable computer. You create a new dial up connection to connect to your company’s remote access server. You connect to the remote access server by using the dial up connection. You can connect to the servers on the same segment as the remote access server. You cannot access the shared resources that are on the remote segments from the remote access server. What should you do？ （）A、Configure the company remote access server to accept multilink connections.B、Configure the TCP/IP program for the dial up connection to disable IP header compression.C、Configure the TCP/IP properties for the dial up connection to use the default gateway on theremote network.D、Grant your user account dial in permission on the company remote access server.
You want to configure your Windows 2000 Professional computer to remotely access your company’s Windows 2000 routing and remote access server. You configure a VPN connection. For security purposes， you configure the VPN connection to use MS-CHAP v2 only and to require encryption. You also configure TCP/IP to obtain an IP address automatically， to enable IPSec， and to set IPSec to secure server. When you try to connect， you receive the following error message， “The encryption attempt failed because no valid certificate was found.” What should you do to connect to the server？ （）A、Enable the VPN connection to use MS-CHAP.B、Change the data encryption setting to Optional Encryption.C、Specify a TCP/IP address in the network properties.D、Change the IPSec policy setting to Client.
多选题Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）AThe bindings.BA DNS address.CA Gateway address.DA WINS server address.EA DHCP server address.
单选题You use a Windows 2000 Professional portable computer both at the office and at home. In the office you connect the portable computer to a docking station and use Internet Explorer to access the Internet through your LAN connection. At home, you configure a new dial-up connection to the Internet. Now when you attempt to access the Internet from the office you are prompted to connect via your dial-up connection. When you cancel this message, you can only work offline and cannot access the Internet. You want to maintain your dial-up connection for home use and your ability to access the Internet when connected to the company LAN. What should you do?（）AReconfigure the dial-up connection to dial-up to a private network.BCreate another connection that uses a virtual private network （VPN） to connect a private network though the Internet.CConfigure Internet Explorer to automatically detect proxy settings.DConfigure Internet Explorer to dial whenever a network connection is not present.
单选题Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）AConfigure a different TCP/IP addressBEnable DHCP in the TCP/IP propertiesCEnable DNS in the TCP/IP propertiesDConfigure the network adapter to run at 100 Mbps onlyEReplace the network adapter.
单选题You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter. Your computer is able to access the Internet but is unable to discover other computers in the local wireless network. You need to configure the wireless connection to allow your computer to discover other computers. What should you do？（）AConfigure the network category of your wireless network connection to Private.BConfigure the network category of your wireless network connection to Public.CConfigure the TCP/IP packet filtering on the wireless network connection.DConfigure the wireless network connection with the appropriate authentication to the router.
单选题You use a Windows 2000 Professional portable computer both at the office and at home. In the office youconnect the portable computer to a docking station and use Internet Explorer to access the Internetthrough your LAN connection.At home， you configure a new dial-up connection to the Internet. Now when you attempt to access theInternet from the office you are prompted to connect via your dial-up connection. When you cancel thismessage， you can only work offline and cannot access the Internet.You want to maintain your dial-up connection for home use and your ability to access the Internet whenconnected to the company LAN. What should you do？（）AReconfigure the dial-up connection to dial-up to a private network.BCreate another connection that uses a virtual private network （VPN） to connect to a privatenetwork though the Internet.CConfigure Internet Explorer to automatically detect proxy settings.DConfigure Internet Explorer to dial whenever a network connection is not present.
单选题You create a shared Internet connection on a Windows 2000 Professional computer. Your network has 10 users on the LAN. All of the users can connect to HTTP sites， FTP sites， and streaming audio content on the Internet. One of the computers on your LAN is running an FTP host application. Users on the Internet cannot connect to the FTP host on your network. What should you do？（）AConfigure the FTP host to accept incoming requests on service port 80.BConfigure an Internet Connection Sharing application type for FTP to use remote server port 23.CConfigure an Internet Connection Sharing service type for FTP use service port 21 on the FTP host computer.DConfigure an Internet Connection Sharing service type for FTP use service port 23 on the FTP host computer.
单选题You install Windows 2000 Professional on your portable computer. You create a new dial up connection to connect to your company’s remote access server. You connect to the remote access server by using the dial up connection. You can connect to the servers on the same segment as the remote access server. You cannot access the shared resources that are on the remote segments from the remote access server. What should you do？ （）AConfigure the company remote access server to accept multilink connections.BConfigure the TCP/IP program for the dial up connection to disable IP header compression.CConfigure the TCP/IP properties for the dial up connection to use the default gateway on theremote network.DGrant your user account dial in permission on the company remote access server.
单选题You are the network administrator for Company. Your network is a native mode Windows 2000 domain consisting of 50 Windows 2000 Professional client computers and six Windows 2000 Server computers. There are no routers on the network. The client computers have been configured for dynamic IP address application. The network is configured as shown in the Network Diagram. A user reports that she cannot connect to the server named ES1 from her client computer named Workstation5. When she attempts to browse //ES1 from the Run line she receives the message, “The network path was not found”. No other users are reporting problems connecting to ES1. From the user’s computer, you browse //192.168.72.6 from the Run line and successfully connect to the server. You run the ipconfig /all command. The relevant results are shown in the following table. You want the user to be able to access resources on ES1 by using the computer name. What should you do? （）AOn the Internet Protocol (TCP/IP) Properties, sheet, select the Obtain DNS server address automatically option.BOn the Internet Protocol (TCP/IP) Properties, sheet, select the Obtain an IP address automatically option. CConfigure the client computer with a default gateway of 192.168.0.1.DConfigure the client computer with a subnet mask of 255.255.0.0.EConfigure the client computer with a WINS server of 192.168.72.5.