单选题An administrator buys a new server. The server has four disks and needs to be configured formaximum space. Fault tolerance is not a constraint. Which of the following configurations completes this task？（）ARAID 0BRAID 1CRAID 5DRAID 10
单选题
An administrator buys a new server. The server has four disks and needs to be configured formaximum space. Fault tolerance is not a constraint. Which of the following configurations completes this task？（）
A
RAID 0
B
RAID 1
C
RAID 5
D
RAID 10
参考解析
解析：
暂无解析
相关考题：
You are the administrator of two SQL Server 2000 computers. One of these servers contains a 4-GB database named marketing. You want to remove the marketing database from one server and add it to the other as quickly as possible.What should you do?A．Detach the database from the original server by using the sp_detach_db stored procedure. Copy the database and the transaction log files to the new server, and attach them by using the sp_attach_db stored procedure.B．Use the DTS export wizard to transfer all database objects from the original server to the new server. Drop the database from the original server.C．Run a full backup of the database on the original server. Create a new database named marketing on the new server. Restore the backup in the new marketing database. Drop the database from the original server.D．Shut down the original server. Copy the database and the transaction log files to the new server. Use the DISK INIT and DISK REFIT statements to attach the data file to the new server. Drop the database from the original server.
You are the administrator of a 12 SQL Server 2000 computers. These servers are located in company offices throughout the world.You configure a multiserver job on the server in your company's New York City office. You configure this server as a master server, and designate the remaining 11 servers as target servers.After the job completes successfully, you decide to set up a new SQL Server 2000 computer as the master server. The new server will be named JobMaster and the other 12 servers will be target servers.You need to make the New York City server a target server instead of a master server. What should you do?A．On the New York City server, defect all 11 target servers. On the JobMaster server, enlist the 12 servers as target servers.B．On the JobMaster server, enlist all other servers as target servers.C．On the New York City server enlist the JobMaster server as a target server. Transfer the multiserver jobs from the New York City server to the JobMaster server.D．On the JobMaster server, enlist the New York City server as a target server. On the JobMaster server, enlist the other 11 servers as target servers. On the JobMaster server, defect the New York City server.
Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.What should you do?A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.
An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?（）A. The NIC is not on the HCL.B. The driver is incorrect on the server.C. The patch cable has not been seated properly.D. The NIC is not seated properly.
You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.You want to install Windows 2000 Server from source files that are located on a server on the network.What should you do?A．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.B．Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.C．On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.D．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
You are the network administrator for Ezonexam.Your Windows 2000 Server computer named Ezonexam1 contains two 36-GB hard disks. Disk 0 and Disk 1. Each disk is configured as a basic disc and has a single 36-GB NTFS partition. Both partitions are backed up to a tape each night. The partition on Disk 1 stores user data. Most users at Ezonexam encrypt their files. Disk 1 fails. You replace it with a new hard disk and create a single NTFS partition.You need to recover the data as quickly as possible while maintaining the security of the files on Disk 1.What should you do?A．Restore the contents of Disk 1 from the most recent tape backup to a second file server. Instruct users to copy their files from the second file server to the new partition.B．Restore the contents of Disk 1 from the most recent tape backup to a second file server. Log on to Ezonexam1 console as a recovery agent. Copy the files from the second file server to the new partition.C．Restore the contents of Disk 1 from the most recent tape backup to the new partition on Ezonexam1. Instruct the users to verify the integrity of their files.D．Restore the contents of Disk 1 from the most recent tape backup to the new partition on Ezonexam1. Run the cipher command to decrypt the files.
An administrator buys a new server. The server has four disks and needs to be configured formaximum space. Fault tolerance is not a constraint. Which of the following configurations completes this task？（）A、RAID 0B、RAID 1C、RAID 5D、RAID 10
A system administrator has run topas on a server. The output shows that the %iowait of the system is 60% and that most of the disk activity is on hdisk0. Which of the following procedures should be performed to fix this problem?（）A、 Replace the hard disk with a faster disk drive. B、 Add another paging space on another hdisk. C、 Spread the data hdisk0 across several hdisks. D、 Nothing, since %iowait is a measurement of CPU time.
An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?（）A、The NIC is not on the HCL.B、The driver is incorrect on the server.C、The patch cable has not been seated properly.D、The NIC is not seated properly.
An administrator is upgrading memory on the server. Once the server in turned back on， the administrator notices that the memory has not changed. The system board website says the board should accept the new amount of memory. Which of the following should the administrator do FIRST？（）A、 Replace memory chips with known good memory chips.B、 Reseat the memory chips.C、 Update the BIOS.D、 Upgrade the server OS.
An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance. The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）A、Move the page file to the new drive.B、Copy the system32 directory to the new drive.C、Convert the C drive to a basic disk.D、Setup a software RAID to mirror the C drive.
The administrator has just installed a new memory module into the server. Now， the server is not showing the new memory. Which of the following should the administrator perform FIRST？（）A、System rebootB、Reseat the memoryC、Install the latest firmwareD、Install the latest driver
An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present. Which of the following could be the reason for this?（）A、The server BIOS firmware is out-of-date.B、The server does not have the correct drivers.C、The server hard drives have not begun to spin.D、The server has too little memory installed.
An administrator has a requirement to mirror the operating system on a VIO server. Which of the following IOS commands will achieve this？（）A、 mirrorvgB、 iosmirrorC、 mirroriosD、 mkiosmirror
Your company has a domain controller server that runs the Windows Server 2008 R2 operating system. The server is a backup server. The server has a single 500-GB hard disk that has three partitions for the operating system， applications， and data. You perform daily backups of the server. The hard disk fails. You replace the hard disk with a new hard disk of the same capacity. You restart the computer on the installation media. You select the Repair your computer option. You need to restore the operating system and all files. What should you do（）A、Select the System Image Recovery option.B、Run the Imagex utility at the command prompt.C、Run the Wbadmin utility at the command prompt.D、Run the Rollback utility at the command prompt.
Your company has a domain controller that runs Windows Server 2008. The server is a backup server. The server has a single 500-GB hard disk that has three partitions for the operating system， applications， and data. You perform daily backups of the server. The hard disk fails. You replace the hard disk with a new hard disk of the same capacity. You restart the computer on the installation media. You select the Repair your computer option. You need to restore the operating system and all files. What should you do（）A、Select the Startup repair option.B、Select the System restore option.C、Run the Rollback utility at the command prompt.D、Run the Wbadmin utility at the command prompt.
You are the desktop administrator for your company. The company's network contains a RIS server, a DHCP server, and a DNS server. You need to install Windows XP Professional on a computer that does not have a CD-ROM drive. The computer has the following configuration: a Pentium III 1-GHz processor, a 5-GB hard disk, 128 MB of RAM, a modem in the first PCI slot ,an Ethernet card in the last ISA slot. You attempt to install Windows XP Professional on the computer by using a RIS bootable floppy disk. However, you are unable to connect to the RIS server. What should you do?（） A、Move the Ethernet card to the first ISA slot. B、Remove the Ethernet card and replace it with an Ethernet card that is PXE compliant. C、Share the RIS image on the RIS server. Create a network bootable floppy disk. Insert the floppy disk, and install Windows XP Professional from the share. D、Place the NDIS network drivers in the root directory of the RIS bootable floppy disk. Use the floppy disk to connect to the RIS server.
You work as a network administrator， and your responsibilities include managing server storage. You havebeen asked to purchase a new disk subsystem for your company’s storage-area network （SAN）. You arein the process of testing hardware solutions before making purchases， and you attach a new disksubsystem to the network. You want to provision the new disks and create new logical unit numbers （LUNs）to assign to a server named Server1. You open Storage Manager for SANs， but you can’t see the newhardware. However， you can connect to the new hardware by using the software provided by the vendor.You want to be able to manage the new disk subsystem you purchase by using Storage Manager for SANs. What should you do？（）A、In Disk Management， chooses the Rescan Disks option.B、Choose a disk subsystem from a vendor that has a Virtual Disk Service hardware provider.C、On Server1， configures iSCSI Initiator to specify the new hardware as a favorite target.D、Use Storage Explorer to configure Server1 as an iSNS server.
单选题An administrator is upgrading memory on the server. Once the server in turned back on， the administrator notices that the memory has not changed. The system board website says the board should accept the new amount of memory. Which of the following should the administrator do FIRST？（）A Replace memory chips with known good memory chips.B Reseat the memory chips.C Update the BIOS.D Upgrade the server OS.
单选题An administrator wants to rackmount a new server. Power and network outlets are available and cooling in the room is adequate to support the additional server. The new server is identical to the other servers already installed. Which of the following items should the administrator FIRST verify before installing the server？（）AHBA is compatible with the SAN fiber switch.BUpdate the newly installed server with the latest KVM drivers.CThe UPS will continue to perform as expected with the additional load.DVerify the server NIC is compatible with the NAS.
单选题Recently traffic to the company web server has more than doubled， resulting in slower response times from the server. An administrator has decided to add a second， identical 10/100/1000 NIC to the server. The server is presently connected to a 10/100/1000 switch， with four open ports on the switch. Which of the following is the BEST solution to speed up web traffic？（）AFree up more ports on the switchBEnable server load balancingCMove the second network adapter to a new subnetDEnable network adapter teaming
单选题An administrator is upgrading memory on the server. Once the server in turned back on, the administrator notices that the memory has not changed. The system board website says the board should accept the new amount of memory.Which of the following should the administrator do FIRST?（）AReplace memory chips with known good memory chips.BReseat the memory chips.CUpdate the BIOS.DUpgrade the server OS
单选题You are the network administrator for You administare a Windows Server 2003 computer named TestKing12. TestKing12 has a single disk. The disk is configured so that it has four primary partitions, which are formatted as FAT32. The disk also has unallocated space available. You need to use the unallocated disk space to store user data. What should you use?（）AConvert all existing partitions to NTFS.BUsing Diskpart.exe, run the create command.CConvert the disk to a dynamic disk, and create a new volume.DUsing Diskpart.exe, run the extend command.
单选题An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present. Which of the following could be the reason for this？（）A The server BIOS firmware is out-of-date.B The server does not have the correct drivers.C The server hard drives have not begun to spin.D The server has too little memory installed.
单选题An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?（）AThe NIC is not on the HCL.BThe driver is incorrect on the server.CThe patch cable has not been seated properly.DThe NIC is not seated properly.
单选题You work as a network administrator， and your responsibilities include managing server storage. You havebeen asked to purchase a new disk subsystem for your company’s storage-area network （SAN）. You arein the process of testing hardware solutions before making purchases， and you attach a new disksubsystem to the network. You want to provision the new disks and create new logical unit numbers （LUNs）to assign to a server named Server1. You open Storage Manager for SANs， but you can’t see the newhardware. However， you can connect to the new hardware by using the software provided by the vendor.You want to be able to manage the new disk subsystem you purchase by using Storage Manager for SANs. What should you do？（）AIn Disk Management， chooses the Rescan Disks option.BChoose a disk subsystem from a vendor that has a Virtual Disk Service hardware provider.COn Server1， configures iSCSI Initiator to specify the new hardware as a favorite target.DUse Storage Explorer to configure Server1 as an iSNS server.
单选题An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present. Which of the following could be the reason for this?（）AThe server BIOS firmware is out-of-date.BThe server does not have the correct drivers.CThe server hard drives have not begun to spin.DThe server has too little memory installed.
单选题The company has purchased one hundred and fifty new servers. The server administrator needs to build and deploy them as quickly as possible. Which of the following is the FASTEST method of building and deploying each server？（）ABuild each server from the OS manufacturer’s build disk.BUse an imaging system to manually deploy the build to the servers.CBuild each server with the manufacturer’s build disk.DGive the company build disk to the server manufacturer.