如果在重新启动工程师站,要用Boot Tape来BOOTING工程师站,当出现Diagnostic Disk Program时就()A、点击[H]键B、按住[H]键C、双击[H]键D、释放[H]键

如果在重新启动工程师站,要用Boot Tape来BOOTING工程师站,当出现Diagnostic Disk Program时就()

  • A、点击[H]键
  • B、按住[H]键
  • C、双击[H]键
  • D、释放[H]键

相关考题:

若DCS工程师站及工作站全部停电,应()。 A、到现场将控制阀改为副线控制B、改到工程师站进行操作C、重新启动操作系统D、重新启动工程师站

若DCS工作站停电,应()。 A、将控制阀全部改为手动B、改到工程师站进行操作C、重新启动操作系统D、重新启动工程师站

DCS工作站停电后,应()。 A、保持操作的稳定B、改到工程师站进行操作C、立即停工D、重新启动操作系统

A customer asks the sales professional how to update the UEFI on the HX5. They do not want to use AMM. Which is the procedure of the following?()A、InstallServerGuide CD/DVD,boot the HX5 blade and follow the promptsB、Boot the blade from the HX5 Bootable Media Creator (BoMC) and follow the promptsC、Press F1 while the HX5 is booting,incert the CD/DVD and select "OK"D、Mount the IMM virtual disk

An AIX server will not boot in normal mode and the server must be booted into maintenance  mode to rebuild the boot logical volume. A NIM master is not defined in this environment.  How is the system booted into maintenance mode to perform this task ()A、Apply power and when the SMS menus appear press 5 repeatedly to enter a maintenance boot automatically. The system will present a maintenance shell eventually.B、Boot media such as CDROM or Tape is required to boot into maintenance mode. When inserted into the proper device the system automatically boots into maintenance mode when it can not boot into normal mode.C、Apply power and the server automatically boots into maintenance mode where you can select your disk to rebuild the boot logical volume.D、Boot media such as CDROM or Tape is required and an administrator must select the proper SMS menus to get into maintenance mode.

DCS集中管理部分由()组成。A、操作站、工程师站、上位机B、操作站、工程师站、现场设备C、操作站、工程师站D、工程师站、上位机

CENTUMCS3000R3系统中,()主要用来操作和监视。A、现场控制站FCSB、人机接口站HISC、工程师站ENGD、实时控制总线Vnet

从DCS工程师站取下Tape之前必须将Tape Unload,使Tape Driver的灯()之后,才可以从Tape driver中取出TapeA、发红光B、亮C、发黄光D、灭

CENTUMCS3000R3系统中,HIS是(),主要用来操作和监视。A、工程师站B、现场控制站C、人机接口站D、实时控制总线

A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOSimage.what function does the router perform next?()A、It checks the configuration registerB、It attempts to boot from a TFTP serverC、It loads the first image file in flash memoryD、It inspects the configuration file in NVRAM for boot instructions

A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next?()A、It checks the configuration registerB、It attempts to boot from a TFTP serverC、It loads the first image file in flash memoryD、It inspects the configuration file in NVRAM for boot instructions

Which of the following is the BEST solution for repairing a hard drive that results in the Could not readfrom selected boot disk display upon booting? ()A、Use recovery console and the bootcfg /rebuild command.B、Use recovery console and the chkdsk command.C、Use recovery console and the fixboot command.D、Use recovery console and the fixmbr command.

After applying a new driver to a NIC, the server reboots and fails to restart. Which of the following is the BEST way to resolve the problem?()A、Boot using recovery console and restore the previous driver.B、Boot the server, press F8 and access last known good configuration.C、Restore the server using last backup tape.D、Boot the server with ASR option.

An administrator is attempting to start a server from a bootable Linux disk but instead the server boots into Windows. Which of the following is the MOST likely reason for this?()A、The system needs to boot to Windows first, prior to booting into Linux.B、The OS settings are not set properly for Linux support.C、The boot order is set incorrectly in the BIOS.D、The Linux disk is not supported in a Windows environment.

What is the correct procedure to update the UEFI on HX5 with MAX5 blades without using the AMM?()A、Insert the ServerGuide CD/DVD, boot the HX5 blade and follow the prompts B、Boot the blade from the HX5 Bootable Media Creator (BoMC) and follow the prompts C、Press F1 when the HX5 system is booting, select Update UEFI, insert the CD/DVD and select OKD、Mount the IMM virtual disk

When booting the p5 590 server in full system partition mode, which location is preferred for the fastest boot?()A、A SAN deviceB、First I/O drawerC、Any I/O drawer within the main frameD、First I/O drawer within the expansion frame

Which of the following is the correct procedure to update the BIOS on LS42 blades without using the AMM?()A、Insert the Update eXpress Service Pack Installer (UXSPI) CD, boot the LS42 blade and follow the prompts B、Boot the blade to the Bootable Media Creator (BoMC) CD and follow the prompts C、Press F1 when the LS42 system is booting, select Update BIOS, insert the diskette into the diskette drive, and select OK D、Use the Remote Supervisor Adapter virtual disk

A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?()A、The hard drive is not formatted.B、The BIOS is corrupted.C、The motherboard has faulty capacitors.D、The drive cable is backwards

单选题After applying a new driver to a NIC, the server reboots and fails to restart. Which of the following is the BEST way to resolve the problem? ()A Boot using recovery console and restore the previous driver.B Boot the server, press F8 and access last known good configuration.C Restore the server using last backup tape.D Boot the server with ASR option.

单选题An administrator is attempting to start a server from a bootable Linux disk but instead the serverboots into Windows. Which of the following is the MOST likely reason for this?()A The system needs to boot to Windows first, prior to booting into Linux.B The OS settings are not set properly for Linux support.C The boot order is set incorrectly in the BIOS.D The Linux disk is not supported in a Windows environment.

单选题An AIX server will not boot in normal mode and the server must be booted into maintenance  mode to rebuild the boot logical volume. A NIM master is not defined in this environment.  How is the system booted into maintenance mode to perform this task ()AApply power and when the SMS menus appear press 5 repeatedly to enter a maintenance boot automatically. The system will present a maintenance shell eventually.BBoot media such as CDROM or Tape is required to boot into maintenance mode. When inserted into the proper device the system automatically boots into maintenance mode when it can not boot into normal mode.CApply power and the server automatically boots into maintenance mode where you can select your disk to rebuild the boot logical volume.DBoot media such as CDROM or Tape is required and an administrator must select the proper SMS menus to get into maintenance mode.

单选题A Cisco router is booting and has just completed the POST process. It is now ready to find and load an IOS  image. What function does the router perform next?()AIt checks the configuration register.BIt attempts to boot from a TFTP server.CIt loads the first image file in flash memory.DIt inspects the configuration file in NVRAM for boot instructions.

单选题A system administrator has a mksysb on tape of an AIX 5.2 machine and needs to install it on a different server. How can this be accomplished?()AInstall the base AIX from 5.2 media and then install the mksysb overtop.BMount the tape and use the tar command to install AIX and the rest of the contents of the rootvg.CInsert the mksysb tape and a 5.2 base media CD and then boot to maintenance mode and initiate the install.DInstall AIX 5.2 from base media and then perform an update_all install from the mksysb tape of the original machine.

单选题A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next?()AIt checks the configuration registerBIt attempts to boot from a TFTP serverCIt loads the first image file in flash memoryDIt inspects the configuration file in NVRAM for boot instructions

单选题A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOSimage.what function does the router perform next?()AIt checks the configuration registerBIt attempts to boot from a TFTP serverCIt loads the first image file in flash memoryDIt inspects the configuration file in NVRAM for boot instructions

单选题A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?()AThe hard drive is not formatted.BThe BIOS is corrupted.CThe motherboard has faulty capacitors.DThe drive cable is backwards

单选题When booting the p5 590 server in full system partition mode, which location is preferred for the fastest boot?()AA SAN deviceBFirst I/O drawerCAny I/O drawer within the main frameDFirst I/O drawer within the expansion frame