The output of s how ip eigrp topology on Router R1 shows the following output, which is all the output related to subnet 10.11.1.0/24. How many feasible successor routes does R1 have for 10.11.1.0/24?（） P 10.11.1.0/24, 2 successors, FD is 2172419 via 10.1.1.2 (2172423/2 8167), Serial0/0/0.1 via 10.1.1.6 (2172423/28167), Serial0/0/0.2A、0B、1C、2D、3
The output of s how ip eigrp topology on Router R1 shows the following output, which is all the output related to subnet 10.11.1.0/24. How many feasible successor routes does R1 have for 10.11.1.0/24?（） P 10.11.1.0/24, 2 successors, FD is 2172419 via 10.1.1.2 (2172423/2 8167), Serial0/0/0.1 via 10.1.1.6 (2172423/28167), Serial0/0/0.2
- A、0
- B、1
- C、2
- D、3
相关考题：
A network design shows that R1 has four different possible paths from itself to the Data Center subnets.Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）A. show ip eigrp topologyB. show ip eigrp topology all - linksC. show ip route eigrpD. show ip route eigrp all - linksE. show ip eigrp topology all - learned
Refer to the exhibit. BigBids Incorporated is a worldwide auction provider. The network uses EIGRP as its routing protocol throughout the corporation. The network administrator does not understand the convergence of EIGRP. Using the output of the show ip eigrp topology all - links command, answer the administrator‘s questions.Which three networks is the router at 172.17.10.2 directly connected to?（）A. 172.17.0.0/30B. 172.17.1.0/24C. 172.17.2.0/24D. 172.17.3 .0/25E. 172.17.3.128/25F. 172.17.10.0/24
Which one of the following EIGRP commands can check the IP addresses of the adjacent neighbors, as well as verifying the EIGRP retransmit intervals and queue counts?() A. TK1#show ip eigrp adjacencyB. TK1#show ip eigrp topologyC. TK1#show ip eigrp interfacesD. TK1#show ip eigrp neighborsE. None of the above
The output of s how ip eigrp topology on Router R1 shows the following output, which is all the output related to subnet 10.11.1.0/24. How many feasible successor routes does R1 have for 10.11.1.0/24?（）P 10.11.1.0/24, 2 successors, FD is 2172419via 10.1.1.2 (2172423/2 8167), Serial0/0/0.1via 10.1.1.6 (2172423/28167), Serial0/0/0.2A.0B.1C.2D.3
Based on the exhibited output, which three statements are true?() A. The route to 10.2.0.0/16 was redistributed into EIGRP.B. A default route has been redistributed into the EIGRP autonomous system.C. R1 is configured with the ip summary - address command.D. R1 is sourcing a n external EIGRP route from Null0.E. The router at 10.1.1.2 is configured with the ip default - network 0.0.0.0 command.F. R1 is configured with the variance command.
Which command will display EIGRP packets sent and received, as well as statistics on hello packets, updates, queries, replies, and acknowledgments?() A. debug eigrp packetsB. show ip eigrp trafficC. debug ip eigrpD. show ip eigrp interfaces
A network administrator is troubleshooing an EIGRP problem on a router and needs to confirm the IP addresses of the devices with which the router has established adjacency. The retransmit interval and the queue counts for the adjacent routers also need to be checked. What command will display the required information?（）A. Router# show ip eigrp adjacencyB. Router# show ip eigrp topologyC. Router# show ip eigrp interfacesD. Router# show ip eigrp neighbors
Router R1 has been configured for EIGRP. The configuratio n also includes an ACL with one line -access - list 1 permit 10.100.32.0 0.0.15.255 - and the EIGRP configuration includes the distribute -list 1 in command. Which of the following routes could not be displayed in the output of the show ip eigrp topology comm and as a result?（）A、10.10.32.0/19B、10.10.44.0/22C、10.10.40.96/27D、10.10.48.0/23E、10.10.60.0/30
Which command will display all the EIGRP feasible successor routes known to a router?（）A、Router# show ip eigrp routes *B、Router# show ip eigrp summaryC、Router# show ip eigrp topologyD、Router# show ip eigrp adjacenciesE、Router# show ip eigrp neighbors detail
A network administrator is troubleshooing an EIGRP problem on a router and needs to confirm the IP addresses of the devices with which the router has established adjacency. The retransmit interval and the queue counts for the adjacent routers also need to be checked. What command will display the required information?（）A、Router# show ip eigrp adjacencyB、Router# show ip eigrp topologyC、Router# show ip eigrp interfacesD、Router# show ip eigrp neighbors
Which of the following commands shows all routes learned via EIGRP？（Choose all that apply.）（）A、show ip eigrp topologyB、show ip eigrp adjacencyC、show ip eigrp routesD、show ip eigrp databaseE、show ip route eigrpF、show ip eigrp forwarding
Which one of the following EIGRP commands can check the IP addresses of the adjacent neighbors, as well as verifying the EIGRP retransmit intervals and queue counts?（）A、TK1#show ip eigrp adjacencyB、TK1#show ip eigrp topologyC、TK1#show ip eigrp interfacesD、TK1#show ip eigrp neighborsE、None of the above
Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An engineer adds the ip hello - interval eigrp 9 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this c hange？（）A、The show ip eigrp neighbors command on R1 lists the revised Hello timerB、The show ip eigrp interfaces command on R1 lists the revised Hello timerC、The R1 - R2 neighborship fails due to Hello timer mismatcHD、The show ip eigrp interfaces detail command on R1 lists the revised Hello timer
Router R1 has working interfaces S0/0, S0/1, and S0/2, with IP address/prefix combinations of 10.10.10.1/24, 10.10.11.2/24, and 10.10.12.3/22. R1's configuration includes the command s router eigrp 9 and network 10.0.0.0. The show ip eigrp interfaces command lists S0/0 and S0/1 in the command output, but not S0/2. Which answer gives the reason for the omission？（）A、R1 has EIGRP neighbors reachable via S0/0 and S0/1, but not via S0/2, so it is not included.B、S0/2 may currently be in a state other than up/up.C、The network 10.0.0.0 command requires the use of mask 255.0.0.0 due to EIGRP being classful by default.D、S0/2 may be configured as a passive inter face.
A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）A、show ip eigrp topologyB、show ip eigrp topology all - linksC、show ip route eigrpD、show ip route eigrp all - linksE、show ip eigrp topology all - learned
Which command displays EIGRP-related router activities as they occur?（）A、TestKing# show ip route *B、TestKing# debug eigrp routeC、TestKing# debug ip eigrpD、TestKing# debug ip protocols eigrpE、TestKing# show ip route eigrp
单选题Which one of the following EIGRP commands can check the IP addresses of the adjacent neighbors, as well as verifying the EIGRP retransmit intervals and queue counts?（）ATK1#show ip eigrp adjacencyBTK1#show ip eigrp topologyCTK1#show ip eigrp interfacesDTK1#show ip eigrp neighborsENone of the above
单选题Router R1 uses S0/0 to connect via a T/1 to the Frame Relay servicE. Five PVCs terminate on the serial link. Three PVCs (101, 102, and 103) are configured on subinterface S0/0.1, and one each (104 and 105) are on S0/0 .2 and S0/0.3. The configuration shows no configuration related to EIGRP WAN bandwidth control, and the bandwidth command is not configured at all. Which of the following is true about how IOS tries to limit EIGRP's use of bandwidth on S0/0?（）AR1 limi ts EIGRP to around 250Kbps on DLCI 102BR1 limits EIGRP to around 250Kbps on DLCI 104CR1 limits EIGRP to around 150Kbps on every DLCIDR1 does not limit EIGRP because noWAN bandwidth control has been configured
单选题EIGRP uses five generic packet types （hello， updates， queries， replies， acknowledgements）. If youwished to view the statistics for these packets， which IOS command should you use？（）Adebug eigrp packetsBshow ip eigrp trafficCshow ip eigrp topologyDshow ip eigrp neighbors
单选题Which command displays EIGRP-related router activities as they occur?（）ATestKing# show ip route *BTestKing# debug eigrp routeCTestKing# debug ip eigrpDTestKing# debug ip protocols eigrpETestKing# show ip route eigrp
单选题Which of the following commands shows all routes learned via EIGRP？（Choose all that apply.）（）Ashow ip eigrp topologyBshow ip eigrp adjacencyCshow ip eigrp routesDshow ip eigrp databaseEshow ip route eigrpFshow ip eigrp forwarding
多选题Router R1 has been configured for EIGRP. The configuratio n also includes an ACL with one line -access - list 1 permit 10.100.32.0 0.0.15.255 - and the EIGRP configuration includes the distribute -list 1 in command. Which of the following routes could not be displayed in the output of the show ip eigrp topology comm and as a result?（）A10.10.32.0/19B10.10.44.0/22C10.10.40.96/27D10.10.48.0/23E10.10.60.0/30
单选题Which command will display all the EIGRP feasible successor routes known to a router?（）ARouter# show ip eigrp routes *BRouter# show ip eigrp summaryCRouter# show ip eigrp topologyDRouter# show ip eigrp adjacenciesERouter# show ip eigrp neighbors detail
单选题Router R1 has working interfaces S0/0, S0/1, and S0/2, with IP address/prefix combinations of 10.10.10.1/24, 10.10.11.2/24, and 10.10.12.3/22. R1's configuration includes the command s router eigrp 9 and network 10.0.0.0. The show ip eigrp interfaces command lists S0/0 and S0/1 in the command output, but not S0/2. Which answer gives the reason for the omission？（）AR1 has EIGRP neighbors reachable via S0/0 and S0/1, but not via S0/2, so it is not included.BS0/2 may currently be in a state other than up/up.CThe network 10.0.0.0 command requires the use of mask 255.0.0.0 due to EIGRP being classful by default.DS0/2 may be configured as a passive inter face.
单选题Which command will display EIGRP packets sent and received, as well as statistics on hello packets, updates, queries, replies, and acknowledgments?（）Adebug eigrp packetsBshow ip eigrp trafficCdebug ip eigrpDshow ip eigrp interfaces
单选题Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An engineer adds the ip hello - interval eigrp 9 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this c hange？（）AThe show ip eigrp neighbors command on R1 lists the revised Hello timerBThe show ip eigrp interfaces command on R1 lists the revised Hello timerCThe R1 - R2 neighborship fails due to Hello timer mismatcHDThe show ip eigrp interfaces detail command on R1 lists the revised Hello timer
单选题A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）Ashow ip eigrp topologyBshow ip eigrp topology all - linksCshow ip route eigrpDshow ip route eigrp all - linksEshow ip eigrp topology all - learned