The Peanut router is able to successfully ping the Serial 0 and Ethernet 0 interface of the Popcorn router, but a ping issued to the Ethernet 1 interface fails. Based on the above output, what are the potential causes of this problem?（）A、The Popcorn router is not forwarding RIP updates.B、The Popcorn router did not include network 192.168.12.0 in its routing configuration.C、The Ethernet1 interface of the Popcorn router is shutdown.D、The clockrate is not present in the configuration of one of the routers.E、The Serial interface of the Popcorn router is not operating.
The Peanut router is able to successfully ping the Serial 0 and Ethernet 0 interface of the Popcorn router, but a ping issued to the Ethernet 1 interface fails. Based on the above output, what are the potential causes of this problem?（）
- A、The Popcorn router is not forwarding RIP updates.
- B、The Popcorn router did not include network 192.168.12.0 in its routing configuration.
- C、The Ethernet1 interface of the Popcorn router is shutdown.
- D、The clockrate is not present in the configuration of one of the routers.
- E、The Serial interface of the Popcorn router is not operating.
相关考题：
Which three pre－conditions must be met before an OSPF router can perform graceful restart? () A. Router must be an ABR.B. Router must contain one sham link.C. The network topology must be stable.D. Router must be able to forward packets.E. Neighbors must support graceful restart.
A router has been configured with the settings shown below:[edit]user@host show system authentication-order authentication-order [ radius tacplus ];The router also has a local database that contains the user lab with password lab123. What would happen if both the RADIUS and the TACACS servers are not accessible?（）A.The user lab will not be able to login.B.The user lab will be authenticated against the local database and will be able to login.C.The user lab will receive an error message indicating the router is unable to authenticate due to the authentication servers not responding.D.The user will be able to login only if tries to login as the root user.
An administrator replaced a router with a switch. End users are able to access network shares butare not able to access the Internet. Which of the following is the BEST explanation why the usersare unable to access the Internet?（）A. Router routes traffic between different networks and a switch does notB. The new switch is faulty and needs to be replaced and configured correctlyC. The firewall needs to be setup to allow traffic to reach the InternetD. The switch needs to be setup to forward data traffic to the Internet
A user reports that the wireless network is slow and is able to see and access shared folders that areunknown to the user.Which of the following is the cause of the problem?() A.The SSID broadcast is disabled.B.Wireless router is improperly configured.C.The user is connecting to the wrong SSIDD.The wireless NIC is defective.
You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter.Your computer is able to access the Internet but is unable to discover other computers in the local wireless network.You need to configure the wireless connection to allow your computer to discover other computers.What should you do?（）A.AB.BC.CD.D
What components are required to directly connect two PCs so they are able to participate in a simple peer－to－per network?() A. Straight-through cableB. Compatible network interfacesC. Networking protocolD. HubE. Crossover cableF. router
An employee of ABC company has move to an office on a different floor. Although the administrator is able to telnet to all of the routers,the address of Switch F is needed in order to verify that the employee remains in the same VLAN.Which action could be used by the administrator to find the IP address of Switch F?（）A. Issue the show ip route command on Router AB. Issue the show ip route command on Router BC. Issue the show cdp neighbors command on Router BD. Issue the show cdp neighbors detail command on Router CE. Issue the show arp command on Router AF. Issue the show arp command on Router B
In which of the following scenarios would the "show cdp neighbors detail"command be an appropriate troubleshooting tool?（）A、Two switches are connected via a trunk. Both switches have been assigned an IP address, subnet mask, and default gateway. A ping is successful between the two switches. However, VLAN information is not passed from one switch to the other switch.B、A router and a switch have been assigned an IP address, a subnet mask, and a default gateway. They are directly connected, but a ping between the two devices fails.C、A router connects to another router through a serial interface. Both routers have been assigned an IP address, subnet mask, and default gateway. The routers are running RIP and the networks directly connected to the first router do not pass to the second router. However, a ping from one router to the serial interface of the directly connected neighboring router is successful.D、A router connects to another router via a switch. Both routers and the switch have been assigned an IP address, subnet mask, and default gateway. Neither the routers nor the switch are able to ping one of the hosts that is directly to the switch.
What components are required to directly connect two PCs so they are able to participate in a simple peer-to-per network?（）A、Straight-through cableB、Compatible network interfacesC、Networking protocolD、HubE、Crossover cableF、router
Which three pre-conditions must be met before an OSPF router can perform graceful restart？（）A、Router must be ABRB、Router must contain one sham link.C、The network topology must be stable.D、Router must be able to forward packets.E、Neighbors must support graceful restart.
An employee of ABC company has move to an office on a different floor. Although the administrator is able to telnet to all of the routers,the address of Switch F is needed in order to verify that the employee remains in the same VLAN.Which action could be used by the administrator to find the IP address of Switch F?（）A、Issue the show ip route command on Router AB、Issue the show ip route command on Router BC、Issue the show cdp neighbors command on Router BD、Issue the show cdp neighbors detail command on Router CE、Issue the show arp command on Router AF、Issue the show arp command on Router B
An administrator replaced a router with a switch. End users are able to access network shares butare not able to access the Internet. Which of the following is the BEST explanation why the usersare unable to access the Internet?（）A、Router routes traffic between different networks and a switch does notB、The new switch is faulty and needs to be replaced and configured correctlyC、The firewall needs to be setup to allow traffic to reach the InternetD、The switch needs to be setup to forward data traffic to the Internet
A technician is installing a basic router for a SOHO network. After installing the router the PCs connected to it are not able to acquire an IP address. Which of the following did the technician fail to configure correctly？（）A、DHCPB、DNSC、WINSD、NAT
A user reports that the wireless network is slow and is able to see and access shared folders that are unknown to the user. Which of the following is the cause of the problem?（）A、The SSID broadcast is disabled.B、Wireless router is improperly configured.C、The user is connecting to the wrong SSIDD、The wireless NIC is defective.
Which pre-conditions must be met before an OSPF router can perform graceful restart？（）A、Router must be ABRB、Router must contain one sham link.C、The network topology must be stable.D、Router must be able to forward packets.E、Neighbors must support graceful restart.
Which of the following entries is INVALID in the /etc/resolv.conf file？ （）A、nameserver 127.0.0.1B、# gargoyl is128.66.12.1C、domainname peanut.comD、search peanut.com cashew.com brazil.com almond.com
单选题An employee of ABC company has move to an office on a different floor. Although the administrator is able to telnet to all of the routers,the address of Switch F is needed in order to verify that the employee remains in the same VLAN.Which action could be used by the administrator to find the IP address of Switch F?（）AIssue the show ip route command on Router ABIssue the show ip route command on Router BCIssue the show cdp neighbors command on Router BDIssue the show cdp neighbors detail command on Router CEIssue the show arp command on Router AFIssue the show arp command on Router B
单选题A router has been configured with the settings shown below: [edit] user@host# show system authentication-order authentication-order [ radius tacplus ]; The router also has a local database that contains the user lab with password lab123. What would happen if both the RADIUS and the TACACS servers are not accessible?（）AThe user lab will not be able to login.BThe user lab will be authenticated against the local database and will be able to login.CThe user lab will receive an error message indicating the router is unable to authenticate due to the authentication servers not responding.DThe user will be able to login only if tries to login as the root user.
单选题The peanut is ______.Aof little nutritional valueBdifficult to growCa plant that exhausts the soilDa source of protein
多选题The Peanut router is able to successfully ping the Serial 0 and Ethernet 0 interface of the Popcorn router, but a ping issued to the Ethernet 1 interface fails. Based on the above output, what are the potential causes of this problem?（）AThe Popcorn router is not forwarding RIP updates.BThe Popcorn router did not include network 192.168.12.0 in its routing configuration.CThe Ethernet1 interface of the Popcorn router is shutdown.DThe clockrate is not present in the configuration of one of the routers.EThe Serial interface of the Popcorn router is not operating.
单选题A router has been configured with the authentication order settings shown below: [edit] user@host# show system authentication-order authentication-order [radius tacplus password]; The router also has a local database that contains the user lab with password lab123. What would happen if both the RADIUS and the TACACS servers respond with a reject for user lab?（）AThe user lab will not be able to login.BThe user lab will be authenticated against the local database and will be able to login.CThe user will be able to login only if tries to login as the root user.DThe user lab will receive an error message indicating the username and password provided could not be found on the radius and tacacs servers.
单选题Which of the following entries is INVALID in the /etc/resolv.conf file？ （）Anameserver 127.0.0.1B# gargoyl is128.66.12.1Cdomainname peanut.comDsearch peanut.com cashew.com brazil.com almond.com
单选题An administrator replaced a router with a switch. End users are able to access network shares butare not able to access the Internet. Which of the following is the BEST explanation why the usersare unable to access the Internet?（）ARouter routes traffic between different networks and a switch does notBThe new switch is faulty and needs to be replaced and configured correctlyCThe firewall needs to be setup to allow traffic to reach the InternetDThe switch needs to be setup to forward data traffic to the Internet