Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 has a shared printer named Printer1. Users report that when they attempt to connect to Printer1 they receive the following error message: “The Server for ‘Color Laser 1000’ printer does not have the correct printer driver installed. If you want to search for the proper driver click OK. Otherwise, click Cancel and contact your network administrator or original equipment manufacturer for the correct printer driver.” On Server1, you can print a test page on Printer1. You need to ensure that when users connect to Printer1, the correct printer driver is installed. What should you do? （）A、Configure the printer to use the LPT1 local port.B、Configure Advanced settings in Printing Preferences.C、Add an additional driver from the properties of Printer1.D、Add the Allow Manage Printers permission to CREATOR OWNER.
Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 has a shared printer named Printer1. Users report that when they attempt to connect to Printer1 they receive the following error message: “The Server for ‘Color Laser 1000’ printer does not have the correct printer driver installed. If you want to search for the proper driver click OK. Otherwise, click Cancel and contact your network administrator or original equipment manufacturer for the correct printer driver.” On Server1, you can print a test page on Printer1. You need to ensure that when users connect to Printer1, the correct printer driver is installed. What should you do? （）
- A、Configure the printer to use the LPT1 local port.
- B、Configure Advanced settings in Printing Preferences.
- C、Add an additional driver from the properties of Printer1.
- D、Add the Allow Manage Printers permission to CREATOR OWNER.
相关考题：
Your network contains a database server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).Server1 has the following hardware configurations:·A single processor that supports hyper-threading·Dual processor motherboard·Two hard disks·2 GB of RAMThe first disk contains all the files for the operating system and applications. The second disk is empty.Hyper-threading is disabled in the BIOS.Users report a slow response when they query the database on Server1.You monitor Server1 for one day and receive the performance statistics shown in the following table.You need to improve database performance.What should you do? （）A. Upgrade the RAM to 4 gb.B. Install a second processor.C. Enable hyper-threading in the bios.D. Move the database to the second disk.
You have a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).Users report that it takes a long time to open shared files on Server1. Users do not report this performance problem when they open files on other servers.You notice the following performance statistics on Server1:You need to optimize the performance of Server1.What should you do?（）A. Add more ram.B. Upgrade the processor.C. Increase the size of the PageFile.D. Disable Data Execution Prevention (DEP).
Your network consists of two subnets named Subnet1 and Subnet2. You have a server named Server1 that runs Windows Sever 2003 Service Pack 2 （SP2）. Server1 is located on Subnet1. Users from Subnet1 report poor performance when they connect to Server1. Users from Subnet2 report that they are unable to connect to Server1. You monitor both network segments and discover a large number of NetBIOS broadcasts on both network segments.You need to reduce the number of broadcasts on the network. What should you deploy？（）A、a DHCP Relay AgentB、a WINS serverC、Connection Point Services（CPS）D、Simple TCP/IP Services on all computers
You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). The IP configuration for Server1 is shown in the following table.You replace the network card on Server1. You configure the new network card to use the existing IP configuration.Users reports that they receive a time-out error message when they connect to Server1. You need to ensure that users can immediately connect to Server1. Which command should you instruct users to run?（）A、Arp –d 172.16.90.13 B、Ipconfig /flushdns C、Nbtstat –R D、Netstat –r 172.16.90.13
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 （SP2）. The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125.You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100.You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200.You need to ensure that Printer1’s IP address always remains the same. What should you create on Server2？（）A、an exclusion rangeB、a reservationC、a superscopeD、a user class
Your network consists of a single Active Directory domain named Contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2003 Service Pack 2 （SP2）. Server1 has Windows Support Tools and Resource Kit Tools installed. You need to view the Kerberos tickets issued to Server1. Which tool should you run？（）A、KerbtrayB、Sc/query kdcC、Netdiag/test：KerberosD、Nltest/sc_query：Contoso.com
You have a server named Server1 that runs Windows Server 2003 Service Pack 2 （SP2）. Server1 runs an application named App1. All client computers run Windows XP Professional Service Pack 3 （SP3）. Users from a remote network segment report poor performance when they run App1. You need to identify whether the cause of the poor network performance is packet loss. Which tool should you use？（）A、Netcap.exeB、Netstat.exeC、Pathping.exeD、Tracert.exe
You have a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 runs a custom application. Users report that the performance of Server1 has decreased significantly during the last 30 minutes. You need to identify the current processor and memory usage for each process running on Server1. Which tool should you use? （）A、Event ViewerB、Task ManagerC、Query ProcessD、System Configuration Utility
Your network consists of two subnets named Subnet1 and Subnet2. You have a server named Server1 that runs Windows Sever 2003 Service Pack 2 (SP2). Server1 is located on Subnet1. Users from Subnet1 report poor performance when they connect to Server1. Users from Subnet2 report that they are unable to connect to Server1.You monitor both network segments and discover a large number of NetBIOS broadcasts on both network segments.You need to reduce the number of broadcasts on the network. What should you deploy?（）A、a DHCP Relay Agent B、a WINS server C、Connection Point Services (CPS) D、Simple TCP/IP Services on all computers
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You enable and configure Terminal Server on a server named Server1. A firewall separates Server1 from the internal network. Internal users report that they cannot connect to Server1 by using Remote Desktop Connection. You need to ensure that the users can connect to Server1 by using Remote Desktop Connection. Which port should you open on the firewall? （）A、389B、3268C、3389D、5900
Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 has IPSec enabled. Several users report that they cannot connect to Server1. You need to see how many IPSec connection attempts failed due to authentication failures. What should you do?（）A、From IP Security Monitor, view the Main Mode Statistics. B、From Microsoft Baseline Security Analyzer, scan Server1. C、From the Security event log, view the events from the IPSec source. D、From System Monitor, add the IPSec V4 Driver : Active Security Associations counter.
Your network consists of a single Active Directory domain. The network contains two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 （SP2）.You log on to Server1 by using the Administrator account for the domain. You open Event Viewer and attempt to connect to Server2 but receive the following error message.You verify that you can connect to Server2 by using Windows Explorer and that Windows Firewall is disabled on Server2. You open the Services snap-in on Server2 as shown in the exhibit.You need to ensure that you can connect to Server2 remotely by using Event Viewer. What should you do on Server2？（）A、Add the Administrator account to the HelpServicesGroup.B、Set the Startup Type for the Remote Registry service to Automatic and then start the service.C、Set the Startup Type for the Secondary Logon service to Disabled and then stop the service.D、Set the Startup Type for the Special Administration Console Helper service to Automatic and then start the service.
You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). The IP configuration for Server1 is shown in the following table. wwwwww. ..EEx xxaammk kki iinng ggs ss. ..c ccoomm | English | Chinese(Traditional) | Chinese(Simplified) | - 13 - ExamKings Information Co., Ltd. All rights reserved.You replace the network card on Server1. You configure the new network card to use the existing IP configuration.Users reports that they receive a time-out error message when they connect to Server1.You need to ensure that users can immediately connect to Server1. Which command should you instruct users to run? （）A、Arp –d 172.16.90.13 B、Ipconfig /flushdns C、Nbtstat –R D、Netstat –r 172.16.90.13
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You enable and configure Terminal Server on a server named Server1. A firewall separates Server1 from the internal network. Internal users report that they cannot connect to Server1 by using Remote Desktop Connection. You need to ensure that the users can connect to Server1 by using Remote Desktop Connection. Which port should you open on the firewall? （）A、389B、3268C、3389D、5900
You have a print server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 has a shared printer named Printer1. You need to track the usage for Printer1. The tracked information must indicate the user that submitted the print job. You enable auditing for object access on Server1. What should you do next? （）A、From the Performance console, create a counter log.B、From the properties of Printer1, modify the Device settings.C、From the properties of Printer1, modify the Security settings.D、From the Print Server properties, modify the Advanced setting.
Your network contains 20 subnets. You have a server named Server1 that runs Windows Server 2003 Service Pack 2 （SP2）. Server1 has an IP address of 192.168.10.10 and is located on a subnet named Subnet10. All client computers run Windows XP Professional Service Pack 3 （SP3）. Users on a subnet named Subnet1 report that they cannot connect to Server1. Users on Subnet10 report that they can connect to Server1.You log on to a computer on Subnet1. You need to identify the point of failure on the network. Which command should you run？（）A、Ipconfig /allB、Net view //192.168.10.10C、Ping 192.168.10.10D、Tracert 192.168.10.10
Your network consists of two subnets named Subnet1 and Subnet2. You have a server named Server1 that runs Windows Sever 2003 Service Pack 2 (SP2). Server1 is located on Subnet1. Users from Subnet1 report poor performance when they connect to Server1. Users from Subnet2 report that they are unable to connect to Server1. You monitor both network segments and discover a large number of NetBIOS broadcasts on both network segments. You need to reduce the number of broadcasts on the network. What should you deploy?（） A、a DHCP Relay Agent.B、a WINS server.C、Connection Point Services （CPS）.D、Simple TCP/IP Services on all computers.
our network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125.You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100.You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200.You need to ensure that Printer1’s IP address always remains the same. What should you create on Server2?（）A、an exclusion range B、a reservation C、a superscope D、a user class
Your network contains an Active Directory domain named contoso.com. The domain contains a print server named Server1 that runs Windows Server 2012 R2. Server1 contains a local group named Group1.You share a printer named Printer1 on Server1.You need to configure Printer1 to meet the following requirements： （1）Ensure that the members of Group1， the Server Operators group， the Administrators group， and the Print Operators group can send print jobs to Printer1. （2）Prevent other users from sending print jobs to Printer1. Which two actions should you perform？（）A、Assign the Print permission to the Server Operators groupB、Remove the permissions for the Creator Owner groupC、Remove the permissions for the Everyone groupD、Assign the Print permission to Group1E、Assign the Print permission to the Administrators group
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125. You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100. You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200. You need to ensure that Printer1s IP address always remains the same. What should you create on Server2?（）A、an exclusion rangeB、a reservationC、a superscopeD、a user class
单选题our network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125.You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100.You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200.You need to ensure that Printer1’s IP address always remains the same. What should you create on Server2?（）Aan exclusion range Ba reservation Ca superscope Da user class
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125.You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100.You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200.You need to ensure that Printer1’s IP address always remains the same. What should you create on Server2?（）Aan exclusion range Ba reservation Ca superscope Da user class
单选题You have a server named Server1 that runs Windows Server 2003 Service Pack 2 （SP2）. Server1 runs an application named App1. All client computers run Windows XP Professional Service Pack 3 （SP3）. Users from a remote network segment report poor performance when they run App1. You need to identify whether the cause of the poor network performance is packet loss. Which tool should you use？（）ANetcap.exeBNetstat.exeCPathping.exeDTracert.exe