You are the administrator of Company’s network. Your Windows 2000 Professional computer has a removable disk device installed. The device can use storage modules of varying sizes. You use these storage modules to transfer graphics files between your location and a printing company. The printing company uses Windows 98. You insert a new 1 GB disk device into your computer and format the new disk device as NTFS with the default options. You then place large graphics files on the disk device and deliver it to the printing company. The printing company reports that they are unable to access the files. You want the printing company to be able to access the graphics files on the new disk device. What should you do? （）A、Format the new disk device as FAT16 with a 128 KB cluster size.B、Format the new disk device as FAT32 with a 4 KB cluster size.C、Format the new disk device as NTFS with a 4 KB cluster size.D、Format the new disk device as NTFS with a 8 KB cluster size.
You are the administrator of Company’s network. Your Windows 2000 Professional computer has a removable disk device installed. The device can use storage modules of varying sizes. You use these storage modules to transfer graphics files between your location and a printing company. The printing company uses Windows 98. You insert a new 1 GB disk device into your computer and format the new disk device as NTFS with the default options. You then place large graphics files on the disk device and deliver it to the printing company. The printing company reports that they are unable to access the files. You want the printing company to be able to access the graphics files on the new disk device. What should you do? （）
- A、Format the new disk device as FAT16 with a 128 KB cluster size.
- B、Format the new disk device as FAT32 with a 4 KB cluster size.
- C、Format the new disk device as NTFS with a 4 KB cluster size.
- D、Format the new disk device as NTFS with a 8 KB cluster size.
相关考题：
You are the administrator of Ezonexam.com's Windows 2000 network.Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.You want to be able to access your project files when using either of the operating systems.What should you do?A．Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.B．Configure Disk 2 as a dynamic volume then format as an NTFS partition.C．Configure Disk 2 to use Encrypting File System (EFS).D．Configure Disk 2 as a basic volume and format the volume as FAT32.
You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）A、Configure Windows 2000 Professional to enable driver signing.B、Configure Windows 2000 Professional to disable driver signing.C、Start the computer by using the recovery console， restore the system state data.D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
You are the administrator of ExamSheet.net's network. Your Windows 2000 Professional computer has a Pentium II 400-HHz processor, 128 MB of RAM, and IDE hard disk. After installing a new digital imaging application you notice that your computer is responding very slowly and you are experiencing delays in processing graphics files. You want to determine if the performance problems are being caused by a memory bottleneck. What should you do?（）A、Use Task Manager to view the running applications. B、Use Task Manager to view the running processes.C、Use System Monitor to view the System-Processor Queue Length and Processor-Interrups/Sec counters.D、Use System Monitor to view the Logical Disk-Avg. Disk sec/Transfer and Memory-Pages/Sec counters.
You want to connect your Windows 2000 Professional computer to multiple TCP/IP subnets on your company’s network. Your computer currently has an ISA network adapter installed. You install a second ISA network adapter. After you restart your computer， you notice that the second ISA network adapter is not functioning. What should you do？（）A、Set the driver signing option to block.B、Set the driver signing option to ignore.C、In the computer’s BIOS， reserve an unused IRQ for ISA devices.D、In the Device Manager， configure the second ISA network adapter to use an unused IRQ.
You install a Zip device on your Windows 2000 Professional computer. You reboot your computer only to find out that the computer does not respond at all. You reboot into Safe Mode， and again， the computer does not respond. How do you recover from this problem？（）A、Use the listsvc command to disable the Zip device driverB、Select Recovery Console from the Recovery Menu.C、Use the disable command to disable the Zip device driverD、Select the Debug mode from the Windows 2000 Advanced Options menuE、Insert the Emergency Repair Disk and specify the path of the recovery file on the hard diskF、Start the computer using the Windows 2000 Professional CD-ROM.
You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）A、When away from the office use Device Manager to remove the adapter. B、When away from the office configure the startup properties for the adapter to be automatic. C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.
You work as an administrator at Company.com handling a Windows 200 network.You install an updated device for the removable storage device on your Windows 2000 Professionalcomputer. You restart the computer. During the startup process the computer stops responding.You then restart the computer in safe mode. During the startup process, the computer stops responding again. You want to resolve the problem so that the computer starts successfully. What should you do?（）A、 Use the listvc command to disable the removable storage device driver.B、 Use the disable command to disable the removable storage device driver.C、 Select debug mode from the Windows 2000 Advanced Options menu.D、 Select Recovery Console from the Repair menu.E、 Start the computer by using the Windows 2000 Professional CD-ROM.F、 Insert an Emergency Repair Disk.
You are the administrator of Company’s network. You have disabled the integrated sound card on your Windows 2000 Professional computer by removing a hardware jumper and install a new PCI sound card. You restart the computer but the sound card does not function correctly. You use Device Manager to view the hardware settings on the computer as shown in the Device Manager window. （Click the Exhibit button.） You want the PCI sound card to function properly. What should you do？ （）A、Use System in Control Panel to uninstall the integrated sound card.B、Use Device Manager to change the IRQ for the new sound card to a different setting from the disabled integrated sound card.C、Move the sound card to a different PCI slot.D、Uninstall the integrated sound card and disable Plug and Play detection for the new device. E、Use Device Manager to update the drivers for the new soundcard.
You are the network administrator for ExamSheet. You install a 16-bit ISA sound card on your Windows 2000 Professional computer. You have an unsigned device driver from the manufacturer of the sound card on a floppy disk. You install the device driver for the sound card. You restart the computer. During the startup process, the computer stops loading Windows 2000 Professional. You restart the computer and again the computer stops loading Windows 2000 Professional. You start the computer in safe mode. You want your computer to start properly. What should you do next? （）A、Configure driver signing to prevent the installation of unsigned files.B、On Control Panel selectSounds and Multimedia Devicesto remove the sound card drivers.C、Use Device Manager to disable the sound card device.D、UseSigverif.exeto find and delete all unsigned files.
You are the administrator of your company's network. You are preparing to deploy 20 new Windows 2000 Professional computers on your network. You want to be able to recover from disk failures and corrupt system files on the new computers. You want to configure the computers to automatically update their system configuration and emergency repair files on a scheduled bases. What should you do?（）A、Use the at command to schedule a weekly job to back up the boot partition.B、Use the at command to schedule a weekly job to run the system file checker.C、Use Windows backup to schedule a backup of the System State Data.D、Use Windows backup to schedule a backup of the system partition and the boot partition.
You are a network administrator for ExamSheet.net’s Windows 2000 network. Your computer has Windows 2000 Professional installed. Your office has a power utage while you are running the Windows 2000 disk defragmenter. When you restart your computer， you receive the following error message： "Bad or missing operating system". You want your computer to start properly. You want to do this with least amount of administrative effort. What should you do？（）A、Reinstall the operating systemB、Start the computer by using the Windows 2000 Professional CD-ROM.C、Use the Recovery Console to repair the Master Boot Record.D、Use the Emergency Repair Disk to repair the Master Boot Record.
You purchase a USB board, ISDN terminal adapter for your Windows 2000 Professional portable computer. You plug the device in to the USB port. Plug and Play fails to detect the new device. You test the device on a Windows 2000 Professional desktop computer. You find that plug and play correctly detects the device. You want to resolve the problem so that you can use ISDN terminal adapter on your portable computer. What should you do?（）A、Use the Device Manager to enable the USB manager root hub.B、Use the Device Manager to enable the USB host controller in the current hardware profile.C、Contact the hardware manufacturer to obtain the upgrade for the Plug and Play BIOS.D、Turn off the computer plug in the ISDN terminal host adapter and restart the computer.
You are the administrator of your company’s network. The dial-up server on your network is configured to support certificate authentication. A user named Tom wants to use smart card authentication on his Windows 2000 Professional portable computer. You that Tom’s computer has a PC Card smart card reader and the appropriate drivers installed. You give Tom a smart card to use. What else should you do to enable smart card authentication on Tom’s computer? （）A、Configure a dial-up connection to use EAP. Select the smart card device for authentication. B、Configure a dial-up connection to use SPAP. Select the smart card device for authentication.C、Configure a dial-up connection to use certificate authentication. Enable the usercredentials for authentication.D、Configure a dial-up connection to connect to a private network through the Internet. Enable L2TP be create a virtual private network （VPN） tunnel.
You are the administrator of Company's network. You have configured your computer with a dual-boot configuration. The computer uses both Windows 2000 Professional and Windows NT Workstation 4.0 with the latest service pack. Your computer is equipped with three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You wish to use Disk 2 to store your project files on. You partition Disk 2 and configure it as a dynamic volume in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either of the operating systems. What should you do?（）A、Format the dynamic volume as a FAT32 partition.B、Format the dynamic volume as a FAT16 partition.C、Configure Disk 2 to use Encrypting File System （EFS）.D、Configure Disk 2 as a basic volume and format the volume as NTFS.E、Configure Disk 2 as a basic volume and format the volume as FAT32.
Your computer has Windows 2000 Professional installed. Your office has a power outrage while you were running the disk defragmenter utility on your computer. When you start the computer again， you receive the following message： "Bad or missing OS". What should you do？（）A、Start the computer in safe mode and reformat the hard disk.B、Start the computer in the debug mode and reformat the hard disk.C、Start the computer using the ERD and repair the Master Boot Record.D、Start the computer by using the Windows 2000 Professional CD-Rom. Then use recovery console to repair the Master Boot Record.
You are the administrator of your company’s network. The software department is preparing to rewrite an accounting application so that it will run on Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98. You want to configure the computers in the software department so that the users can use both Windows 98 and Windows 2000 Professional during the project. You also want to ensure that the computers are configured for optimal disk performance. In addition you want to ensure that users in the software department can access all of the files on their computers by using either operating system. What should you do? （）A、 Create and format a FAT 32 partition.B、 Create and format an NTFS volume.C、 Configure Windows 2000 Professional to enable disk compression.D、 Configure Windows 2000 Professional to enable dynamic volume
You configure your Windows 2000 Professional portable computer to redirect your My Documents folder to your home folder. You want to ensure that you can access all of your files in you’re my Documents folder when you are not connected to the network. What should you do？（）A、Use Windows Explorer to enable offline files.B、Use Windows Explorer to create shortcut to access offline files folder as desktop.C、Use Windows Explorer to configure the properties of your home folder to be available offline.D、Use synchronization manager to configure your home folder to be available offline.E、Create a shortcut in my network places to access your home folder.
You are the administrator of ExamSheet.net's network. Your Windows 2000 Professional computer has a removable disk device installed. The device can use storage modules of varying sizes. You use these storage modules to transfer graphics files between your location and a printing company. The printing company uses Windows 98. You insert a new 100 MB disk device into your computer and format the new disk device as NTFS with the default options. You then place large graphics files on the disk device and deliver it to the printing company. The printing company reports that they are unable to access the files. You want the printing company to be able to access the graphics files on the new disk device. What should you do?（）A、Format the new disk device as NTFS with a 4 KB cluster size.B、Format the new disk device as FAT32 with a 4 KB cluster size.C、Format the new disk device as FAT32 with a 1 KB cluster size.D、Format the new disk device as FAT16 with a 4 KB cluster size.
You install an updated device for the Zip drive on your Windows 2000 Professional computer. You restart the computer. During the startup process, the computer stops responding. You then restart the computer in safe mode. During the startup process, the computer stops responding again. You suspect the new device driver is causing the problem. You want to resolve the problem so that the computer starts successfully. What should you do?（）A、Use the listsvc command to disable the Zip device driver.B、Use the disable command to disable the Zip device driver.C、Select Recovery Console from the Repair menu.D、Select debug mode from the Windows 2000 Advanced Options menu.E、Insert the Emergency Repair Disk.F、Specify the path to the recovery files on the hard disk.G、Start the computer by using the Windows 2000 Professional CD-ROM.
Your Windows 2000 Professional computer has a removable disk device installed. The device can use storage modules of varying sizes. You use these storage modules to transfer graphics filed between your location and a printing company. The printing company uses Windows NT 4.0 service pack 3. You insert a new 20-Mailbox disk device into your computer. When you attempt to format it as FAT32 with the default options, you receive the following error message “Windows was unable to complete the format.” You need to format the device so that you can use it to send a large graphic file to the printing company. How should you format the device?（）A、As FAT 16 with a 4-KB cluster sizeB、As FAT 32 with a 1-KB cluster sizeC、As FAT 32 with a 4-KB cluster sizeD、As NTFS with a 4-KB cluster size
You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotasB、Use Windows 2000 Professional to configure drive C as a dynamic partitionC、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive CD、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission
You are the administrator of Company.com’s Windows 2000 network. Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either operating systems. What should you do?（）A、Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.B、Configure Disk 2 as a dynamic volume then format as an NTFS partition.C、Configure Disk 2 to use Encrypting File System （EFS）.D、Configure Disk 2 as a basic volume and forma the volume as FAT32.
You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?（）A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by using the Emergency Repair Disk for the computer.B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback driver from the Windows 2000 Professional CD-ROM.C、Restart the computer by using the last know good configuration.D、Restart the computer in safe mode and reinstall the original network adapter driver. E、Restart the computer and disable Plug and Play in the computer BIOS.
单选题Your Windows 2000 Professional computer has a removable disk device installed. The device can use storage modules of varying sizes. You use these storage modules to transfer graphics filed between your location and a printing company. The printing company uses Windows NT 4.0 service pack 3. You insert a new 20-Mailbox disk device into your computer. When you attempt to format it as FAT32 with the default options, you receive the following error message “Windows was unable to complete the format.” You need to format the device so that you can use it to send a large graphic file to the printing company. How should you format the device?（）AAs FAT 16 with a 4-KB cluster sizeBAs FAT 32 with a 1-KB cluster sizeCAs FAT 32 with a 4-KB cluster sizeDAs NTFS with a 4-KB cluster size
多选题You are a network administrator for ExamSheet.net’s Windows 2000 network. Your computer has Windows 2000 Professional installed. Your office has a power utage while you are running the Windows 2000 disk defragmenter. When you restart your computer， you receive the following error message： "Bad or missing operating system". You want your computer to start properly. You want to do this with least amount of administrative effort. What should you do？（）AReinstall the operating systemBStart the computer by using the Windows 2000 Professional CD-ROM.CUse the Recovery Console to repair the Master Boot Record.DUse the Emergency Repair Disk to repair the Master Boot Record.
单选题You are the network administrator for ExamSheet. You install a 16-bit ISA sound card on your Windows 2000 Professional computer. You have an unsigned device driver from the manufacturer of the sound card on a floppy disk. You install the device driver for the sound card. You restart the computer. During the startup process, the computer stops loading Windows 2000 Professional. You restart the computer and again the computer stops loading Windows 2000 Professional. You start the computer in safe mode. You want your computer to start properly. What should you do next? （）AConfigure driver signing to prevent the installation of unsigned files.BOn Control Panel selectSounds and Multimedia Devicesto remove the sound card drivers.CUse Device Manager to disable the sound card device.DUseSigverif.exeto find and delete all unsigned files.
多选题You work as an administrator at Company.com handling a Windows 200 network.You install an updated device for the removable storage device on your Windows 2000 Professionalcomputer. You restart the computer. During the startup process the computer stops responding.You then restart the computer in safe mode. During the startup process, the computer stops responding again. You want to resolve the problem so that the computer starts successfully. What should you do?（）AUse the listvc command to disable the removable storage device driver.BUse the disable command to disable the removable storage device driver.CSelect debug mode from the Windows 2000 Advanced Options menu.DSelect Recovery Console from the Repair menu.EStart the computer by using the Windows 2000 Professional CD-ROM.FInsert an Emergency Repair Disk.