Your network contains two DHCP servers named Server1 and Server2. Server1 and Server2 are located in the same subnet.You configure a split scope named Scope1 on the DHCP servers.You need to ensure that Server2 only responds to DHCP client requests if Server1 is unavailable.What should you modify？（）A、the Scope1 properties for Server1B、the Scope1 properties for Server2C、the server options for Server1D、the server options for Server2
Your network contains two DHCP servers named Server1 and Server2. Server1 and Server2 are located in the same subnet.You configure a split scope named Scope1 on the DHCP servers.You need to ensure that Server2 only responds to DHCP client requests if Server1 is unavailable.What should you modify？（）
- A、the Scope1 properties for Server1
- B、the Scope1 properties for Server2
- C、the server options for Server1
- D、the server options for Server2
相关考题：
Your network contains two DHCP servers named Server1 and Server2. Server1 and Server2 are located in the same subnet.You configure a split scope named Scope1 on the DHCP servers.You need to ensure that Server2 only responds to DHCP client requests if Server1 is unavailable.What should you modify？（）A. the Scope1 properties for Server1B. the Scope1 properties for Server2C. the server options for Server1D. the server options for Server2
Your network contains an Active Directory domain. The domain contains a DHCP server named Server1.You create a scope named Scope1 on Server1.You need to prevent unauthorized DHCP clients from receiving addresses from Server1.What should you do？（）A. From the DHCP console, configure filters.B. From the Local Security Policy console, modify the network settings.C. From the Local Users and Groups console, modify the membership of the DHCP Users group.D. From the Netsh tool, change to the DHCP Server context, and then run the initiate auth command.
Your wireless network is not listed in the Connect to a network window of your computer. You need to connect to your wireless network.Which two actions should you perform?() A.AB.BC.CD.DE.E
Cisco IDS sensors form the eyes and ears of your Cisco network intrusion detection system.Placing sensors correctly throughout your network is crucial to successfully implementing your Cisco intrusion detection system . Where can an IPS sensor be placed in an enterprise network?（）A. core layerB. bridging two VLANs on one switchC. between two Layer 2 devices withtrunkingD. between two Layer 2 devices withouttrunking
The Dynamic Host Configuration Protocol provides configuration parameters to Internet（ ）.DHCP consists of two components:a（ ）for delivering host-specifie configuration parameters from a DHCP server to a host and a mechanism for allocation of network addresses to hosts.DHCP is built on a client-server model,where designated DHCP server hosts allocate network addresses and deliver（ ）parameters to dynamically configured hosts.DHCP supports three mechanisms for IP address allocation.In“automatic allocation”,DHCP assigns a（本题）IP address to client.In“dynamic allocation”,DHCP assigns an IP address to a client for a limited period of time.In“manual allocation”,a client’s IP address is assigned by the network（ ）,and DHCP is used simply to convey the assigned address to the client.A.permanentB.dynamicC.connectionD.session
You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?（）A、STPB、GVRPC、SNMPD、VTPE、DHCP
Your company has two data centers. Each data center contains a perimeter network. Your network contains an Exchange Server 2010 organization. You plan to deploy Exchange Server 2010 Edge Transport servers in the perimeter networks. You need to recommend a solution for the Edge Transport servers that meets the following requirements：.Distribute inbound e-mail messages across all Edge Transport servers .Ensure that users receive inbound e-mail messages if an Edge Transport server fails .Ensure that users receive inbound e-mail messages if a single data center network becomes unavailable .Minimize costs What should you recommend？（）A、In each perimeter network， deploy one Edge Transport server. Implement failover clustering.B、In each perimeter network， deploy two Edge Transport servers. Implement failover clustering.C、In each perimeter network， deploy one Edge Transport server. Configure a mail exchange （MX） record for each server.D、In each perimeter network， deploy two Edge Transport servers. Configure a mail exchange （MX） record for each server.
Your network contains two DHCP servers named Server1 and Server2.On Server1, you create a scope named Scope1.You need to ensure that DHCP clients receive IP addresses from the address range in Scope1 if Server1 is unavailable. The solution must prevent both servers from assigning duplicate IP addresses.What should you do from the DHCP console？（）A、On Server1, create a superscope.B、On Server1, select Scope1, and then run the Split-Scope wizard.C、On Server2, create a scope, and then reconcile each scope.D、On Server2, create a scope, and then enable Network Access Protection.
Cisco IDS sensors form the eyes and ears of your Cisco network intrusion detection system. Placing sensors correctly throughout your network is crucial to successfully implementing your Cisco intrusion detection system . Where can an IPS sensor be placed in an enterprise network？（）A、 core layerB、 bridging two VLANs on one switchC、 between two Layer 2 devices with trunkingD、 between two Layer 2 devices without trunking
Your network consists of a single Active Directory site that includes two network segments. Thenetwork segments connect by using a router that is RFC 1542 compliant. You plan to use Windows Deployment Services （WDS） to deploy Windows Server 2008 R2 servers. All new servers support Pre-Boot Execution Environment （PXE）. You need to design a deployment strategy to meet the following requirements： èSupport Windows Server？2008 R2 èDeploy the servers by using WDS in both network segments èMinimize the number of servers used to support WDS What should you include in your design？（） A、Deploy one server. Install WDS and DHCP on the server. Configure the IP Helper tables on therouterbetween the network segments.B、Deploy two servers. Install WDS and DHCP on both servers. Place one server on each of the network segments. Configure both servers to support DHCP option 60.C、Deploy two servers. Install WDS and DHCP on both servers. Place one server on each of the network segments. Configure both servers to support DHCP option 252.D、Deploy two servers. Install WDS and DHCP on one server. Install DHCP on the other server. Place one server on each of the network segments. Configure both servers to support DHCP option60.
Your network contains an Active Directory domain that has two sites. You need to identify whether logon scripts are replicated to all domain controllers. Which folder should you verify（）A、GroupPolicyB、NTDSC、SoftwareDistributionD、SYSVOL
Your network contains an internal network and a perimeter network. The internal network contains a single Active Directory site. The perimeter network contains two Exchange Server 2010 Edge Transport servers. You plan to deploy an Exchange Server 2010 organization on the internal network. You need to plan the deployment of Hub Transport server roles to meet the following requirements：.If a single Hub Transport server fails， e-mail messages from the Internet must be delivered to the Mailboxservers. .If a single Hub Transport server fails， users must be able to send e-mail messages to other users thathave mailboxes on the same Mailbox server. What should you include in the plan？（）A、Deploy one Edge Transport server on the internal network， and then configure EdgeSync synchronization.B、Deploy one Hub Transport server on the internal network， and then configure EdgeSync synchronization.C、Deploy one Hub Transport server on the internal network and one Hub Transport server on the perimeter network.D、Deploy two Hub Transport servers on the internal network.
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. Server2 runs Windows Server 2008 R2 Service Pack 1 （SP1） and has the DHCP Server server role installed. You need to manage DHCP on Server2 by using the DHCP console on Server1. What should you do first？（）A、From Windows Firewall with Advanced Security on Server2， create an inbound ruleB、From Internet Explorer on Server2， download and install Windows Management Framework 3.0.C、From Server Manager on Server1， install a featureD、From Windows PowerShell on Server2， run Enable PSRemoting
You are a network administrator for your company. The network consists of a single Active Directory domain. All domain controllers and member servers run Windows Server 2003， Enterprise Edition. All client computers run Windows XP Professional. The company has one main office and one branch office. The two offices are connected by a T1 WAN connection. There is a hardware router at each end of the connection. The main office contains 10，000 client computers， and the branch office contains 5，000 client computers. You need to use DHCP to provide IP addresses to the Windows XP Professional computers in both offices. You need to minimize network configuration traffic on the WAN connection. Your solution needs to prevent any component involved in the DHCP architecture from becoming a single point of failure. What should you do？ （）A、 At the main office， configure two Windows Server 2003 computers as a DHCP server cluster. Configure the branch office router as a DHCP relay agent.B、 At the main office， configure two Windows Server 2003 computers as a DHCP server cluster. At the branch office， configure a Windows Server 2003 computer as a DHCP relay agent.C、 At the main office， configure two Windows Server 2003 computers as a DHCP server cluster. At the branch office， configure two Windows Server 2003 computers as a DHCP server cluster.D、 At the main office， configure two Windows Server 2003 computers as DHCP servers. Configure one DHCP server to handle 80 percent of the IP address scope and the other DHCP server to handle 20 percent. Configure the branch office router as a DHCP relay agent.
our network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125.You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100.You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200.You need to ensure that Printer1’s IP address always remains the same. What should you create on Server2?（）A、an exclusion range B、a reservation C、a superscope D、a user class
Your network contains two Hyper-V hosts that run Windows Server 2012 R2. The Hyper-V hosts contains several virtual machines that run Windows Server 2012 R2. You install the Network Load Balancing feature on the virtual machines. You need to configure the virtual machines to support Network Load Balancing （NLB）. Which virtual machine settings should you configure？（）A、Port mirroringB、DHCP guardC、Router guardD、MAC address
单选题Your network contains an Active Directory domain. The domain contains a DHCP server named Server1.You create a scope named Scope1 on Server1.You need to prevent unauthorized DHCP clients from receiving addresses from Server1.What should you do？（）AFrom the DHCP console, configure filters.BFrom the Local Security Policy console, modify the network settings.CFrom the Local Users and Groups console, modify the membership of the DHCP Users group.DFrom the Netsh tool, change to the DHCP Server context, and then run the initiate auth command.
单选题Your network consists of a single Active Directory domain. The network contains 20 file servers that run Windows Server 2008 R2. Each file server contains two volumes. One volume contains the operating system. The other volume contains all data files. You need to plan a recovery strategy that meets the following requirements： èAllows the operating system to be restored èAllows the data files to be restored èEnsures business continuity èMinimizes the amount of time to restore the server What should you include in your plan？（）AWindows Deployment Services （WDS）BWindows Automated Installation Kit （Windows AIK） and folder redirectionCthe Multipath I/O feature and Volume Shadow CopiesDthe Windows Server Backup feature and System Image Recovery
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125.You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100.You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200.You need to ensure that Printer1’s IP address always remains the same. What should you create on Server2?（）Aan exclusion range Ba reservation Ca superscope Da user class
单选题Your network contains a DHCP server named DHCP1. You have a DHCP reservation for a computer named Computer1.You add a DNS server option to the reservation.You need to ensure that Computer1 immediately receives the new option.What should you do？（）ARun ipconfig.exe /renew.BRun ipconfig.exe /registerdns.COn DHCP1, recreate the reservation.DOn DHCP1, delete the active lease for the reservation.
单选题Your network contains two DHCP servers. The DHCP servers are named DHCP1 and DHCP2. The internal network contains 1，000 DHCP client computers that are located on a single subnet. A routerseparates the internal network from the Internet. The router has a single IP address on the internal interface. DHCP1 has the following scope information. èStarting IP address： 172.16.0.1 èEnding IP address： 172.16.7.255 èSubnet mask： 255.255.240.0 You need to provide a fault-tolerant DHCP infrastructure that supports the client computers on the internal network. In the event that a DHCP server fails， all client computers must be able to obtain a valid IP address. How should you configure DHCP2？（）ACreate a scope for the subnet 172.16.0.0/20. Configure the scope to use a starting IP address of 172.16.8.1 and an ending IP address of 172.16.15.254.BCreate a scope for the subnet 172.16.0.0/21. Configure the scope to use a starting IP address of 172.16.0.1 and an ending IP address of 172.16.15.254.CCreate a scope for the subnet 172.16.8.0/21. Configure the scope to use a starting IP address of 172.16.8.1 and an ending IP address of 172.16.10.254.DCreate a scope for the subnet 172.17.0.0/16. Configure the scope to use a starting IP address of 172.17.0.1 and an ending IP address of 172.17.255.254.
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125. You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100. You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200. You need to ensure that Printer1s IP address always remains the same. What should you create on Server2?（）Aan exclusion rangeBa reservationCa superscopeDa user class
单选题Your network contains two DHCP servers named Server1 and Server2.On Server1, you create a scope named Scope1.You need to ensure that DHCP clients receive IP addresses from the address range in Scope1 if Server1 is unavailable. The solution must prevent both servers from assigning duplicate IP addresses.What should you do from the DHCP console？（）AOn Server1, create a superscope.BOn Server1, select Scope1, and then run the Split-Scope wizard.COn Server2, create a scope, and then reconcile each scope.DOn Server2, create a scope, and then enable Network Access Protection.
单选题You are using Windows 2000 Professional on your desktop computer. You are working on the company’s financial report and you want other users on the network to able to modify your documents for the report. You want users to share the financial report folder on the network. Because the network contains confidential information you want to prevent users from the enabling off line access for the network share that contains the financial report. What should you do？（）AUse Windows Explorer to receive the offline filesBUsing the Windows Explorer, disable the cache for the reports on the network shareCUse the Windows NT explorer to grant the special access for the reports on the network shareDUse the synchronization manager to configure synchronization not to occur when users are connected to the LAN connection.
多选题Cisco IDS sensors form the eyes and ears of your Cisco network intrusion detection system.Placing sensors correctly throughout your network is crucial to successfully implementing your Cisco intrusion detection system . Where can an IPS sensor be placed in an enterprise network?（）Acore layerBbridging two VLANs on one switchCbetween two Layer 2 devices withtrunkingDbetween two Layer 2 devices withouttrunking
单选题Your network contains two DHCP servers named Server1 and Server2. Server1 and Server2 are located in the same subnet.You configure a split scope named Scope1 on the DHCP servers.You need to ensure that Server2 only responds to DHCP client requests if Server1 is unavailable.What should you modify？（）Athe Scope1 properties for Server1Bthe Scope1 properties for Server2Cthe server options for Server1Dthe server options for Server2
单选题our network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125.You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100.You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200.You need to ensure that Printer1’s IP address always remains the same. What should you create on Server2?（）Aan exclusion range Ba reservation Ca superscope Da user class
单选题Your network contains two Hyper-V hosts that run Windows Server 2012 R2. The Hyper-V hosts contains several virtual machines that run Windows Server 2012 R2. You install the Network Load Balancing feature on the virtual machines. You need to configure the virtual machines to support Network Load Balancing （NLB）. Which virtual machine settings should you configure？（）APort mirroringBDHCP guardCRouter guardDMAC address