VTP is configured on switch R1. Which of the following features were added in VTP version 2 that  were not previously supported in VTP version 1?()A、Supports Token Ring VLANs.B、Allows VLAN consistency checks.C、Saves VLAN configuration memory.D、Reduces the amount of configuration necessary.E、Allows active redundant links when used with spanning tree.

VTP is configured on switch R1. Which of the following features were added in VTP version 2 that  were not previously supported in VTP version 1?()

  • A、Supports Token Ring VLANs.
  • B、Allows VLAN consistency checks.
  • C、Saves VLAN configuration memory.
  • D、Reduces the amount of configuration necessary.
  • E、Allows active redundant links when used with spanning tree.

相关考题:

The Ezonexam network administrator has issued the "VTP password ezonexam" command on a Cisco device. What is the purpose of this command?A.It allows two VTP servers to exists in the same domain, each configured with different passwordsB.It is the password required when promoting a switch from VTP client mode to VTP server modeC.It is used to access the VTP server to make changes to the VTP configurationD.It is used to validate the sources of VTP advertisements sent between switchesE.None of the above

Which three statements about VTP features are true?() A.When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistenciesB.Each broadcast domain on a switch can have its own unique VTP domainC.VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.D.When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.E.VTP pruning is used to increase available bandwidth in trunk linksF.Client,server,and transparent are valid VTP modesG. To configure a switch to be part of two VTP domains,each domain must have its own passwords

What are two characteristics of a switch that is configured as a VTP client?() A.if a switch that is configured to operate in client mode cannot access a VTP server,then the switch reverts to transparent mode.B.The local vlan configuration is updated only when an update that has a higher configuration revision number is received.C.Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.D.When switches in vtp client mode are rebooted,they send a vtp advertisement request to the vtp servers.E.Vtp client is the default vtp modeF.On switches that are configured to operate in client mode ,vlans can be created,deleted,or renamed locally

A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?()A.#vtp domain unsetB.#delete vlan.datC.#no vtp domainD.#vtp domain null

Which of these best describes the actions taken when a VTP message is received on a switch configured with the VTP mode "transparent"?()A、VTP updates are ignored and forwarded out all portsB、VTP updates are ignored and forwarded out trunks onlyC、VTP updates are made to the VLAN database and are forwarded out trunks onlyD、VTP updates are ignored and are not forwarded

Which three statements about VTP features are true?()A、When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistenciesB、Each broadcast domain on a switch can have its own unique VTP domainC、VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.D、When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.E、VTP pruning is used to increase available bandwidth in trunk linksF、Client,server,and transparent are valid VTP modesG、To configure a switch to be part of two VTP domains,each domain must have its own passwords

Which of these best describes the actions taken when a VTP message is received on a switch configured with the VTP mode "transparent"? ()A、 VTP updates are ignored and forwarded out all ports.B、 VTP updates are ignored and forwarded out trunks only.C、 VTP updates are made to the VLAN database and are forwarded out trunks only.D、 VTP updates are ignored and are not forwarded.

What is the purpose of the command shown below?vtp password Fl0r1da()A、It is used to validate the sources of VTP advertisements sent between switches.B、It is used to access the VTP server to make changes to the VTP configuration.C、It allows two VTP servers to exist in the same domain, each configured with different passwords.D、It is the password required when promoting a switch from VTP client mode to VTP server mode.E、It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.

Switch R1 is configured with VTP.  Which two VTP modes will make R1 capable of creating and  deleting VLANs on itself? ()A、 ClientB、 ServerC、 TransparentD、 Pass-throughE、 No-negotiate

f a Cisco switch is configured with VTPv1 in transparent mode, what is done with received VTP advertisements?()A、They are discardedB、The contents are altered to reflect the switch’s own VTP database and then they are forward out  all trunking portsC、The changes within the advertisements are made to the switch’s VTP database.D、The contents are ignored and they are forwarded out all trunking ports.

A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by are load of the swith,will reset the VTP management domain name of the switch to a NULL value?()A、#vtp domain unsetB、#delete vlan.datC、#novtp domainD、#vtp domain null

The Company switches are configured to use VTP. What’s true about the VLAN trunking protocol  (VTP)?()A、VTP messages will not be forwarded over nontrunk links.B、VTP domain names need to be identical. However,case doesn’t matter.C、A VTP enabled device which receives multiple advertisements will ignore advertisements with higher configuration revision numbers.D、A device in "transparent" VTP v.1 mode will not forward VTP messages.E、VTP pruning allows switches to prune VLANs that do not have any active ports associated with  them.

What are two characteristics of a switch that is configured as a VTP client?()A、if a switch that is configured to operate in client mode cannot access a VTP server,then the switch reverts to transparent mode.B、The local vlan configuration is updated only when an update that has a higher configuration revision number is received.C、Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.D、When switches in vtp client mode are rebooted,they send a vtp advertisement request to the vtp servers.E、Vtp client is the default vtp modeF、On switches that are configured to operate in client mode ,vlans can be created,deleted,or renamed locally

A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?()A、#vtp domain unsetB、#delete vlan.datC、#no vtp domainD、#vtp domain null

An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?()A、The switch that will share its VLAN configuration must be in VTP server mode.B、The switches must be in the same VTP domain.C、The switch that will share the VLAN information must be configured as the root bridge.D、The switches must be connected over VLAN trunks.E、The switches must be configured to use the same STP version.F、The switches must have VTP pruning activated.

An 802.1Q trunk is not coming up between two switches. The ports on both switches are configured as "switchport mode desirable." Assuming that there is no physical issue, choose two possible causes.()A、Incorrect VTP domainB、Incorrect VTP passwordC、Incorrect VTP modeD、Incorrect VTP configuration revision

A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?()A、The switch that will share the VLAN information must be in the VTP Server mode.B、The switches must be in the same VTP domain.C、The switch that will share the VLAN information must be configured as the root bridge.D、The switches must be configured to use the same VTP version.E、The switches must be configured to use the same STP version.F、The switches must be configured to use the same type of ID tagging.G、The switches must be connected over VLAN trunks.

A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration?()A、A switch in the VTP client mode cannot update its local VLAN database.B、A trunk link must be configured between the switches to forward VTP updates.C、A switch in the VTP server mode can update a switch in the VTP transparent mode.D、A switch in the VTP transparent mode will forward updates that it receives to other switches.E、A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision number.F、A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP domain membership.

多选题An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?()AThe switch that will share its VLAN configuration must be in VTP server mode.BThe switches must be in the same VTP domain.CThe switch that will share the VLAN information must be configured as the root bridge.DThe switches must be connected over VLAN trunks.EThe switches must be configured to use the same STP version.FThe switches must have VTP pruning activated.

多选题In a customer’s network, VLAN Trunking Protocol (VTP) is running with a domain named main1. VLANs 1,2,3,4,5,10,20 are active on the network. Suddenly the whole network goes down. No traffic is being passed on VLANs 2,3,4,5,10,20, however traffic passes on VLAN 1 and indicates all switches are operational. Right before the network problem occurred, a switch named TEST1 was added to the network.  What three configuration issues on TEST1 could be causing the network outage?()ATEST1 is configured as a VTP server with a different domain name.BTEST1 is not configured to participate in VTP.CTEST1 is configured as a VTP server with the domain name main1.DTEST1 has a lower VTP configuration revision than the current VTP revision.ETEST1 has a higher VTP configuration revision than the current VTP revision.FTEST1 is configured with only VLAN1.

单选题A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by are load of the swith,will reset the VTP management domain name of the switch to a NULL value?()A#vtp domain unsetB#delete vlan.datC#novtp domainD#vtp domain null

多选题What are two characteristics of a switch that is configured as a VTP client?()Aif a switch that is configured to operate in client mode cannot access a VTP server,then the switch reverts to transparent mode.BThe local vlan configuration is updated only when an update that has a higher configuration revision number is received.CVtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.DWhen switches in vtp client mode are rebooted,they send a vtp advertisement request to the vtp servers.EVtp client is the default vtp modeFOn switches that are configured to operate in client mode ,vlans can be created,deleted,or renamed locally

多选题Which three statements about VTP features are true?()AWhen properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistenciesBEach broadcast domain on a switch can have its own unique VTP domainCVTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.DWhen properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.EVTP pruning is used to increase available bandwidth in trunk linksFClient,server,and transparent are valid VTP modesGTo configure a switch to be part of two VTP domains,each domain must have its own passwords

单选题A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?()A#vtp domain unsetB#delete vlan.datC#no vtp domainD#vtp domain null

多选题In the network, VLAN Trunking Protocol (VTP) is running with a domain name of R1. VLANs 1, 2,3, 4, 5, 10, 20 are active on the network. Suddenly the whole network goes down. No traffic isbeing passed on VLANs 2, 3, 4, 5, 10, 20. However, traffic passes on VLAN 1 and indicates allswitches are operational. Right before the network problem occurred; a switch named SW13 wastaken out of the lab and added to the network. What three configuration issues on SW13 could becausing the network outage?()ASW13 has a higher VTP configuration revision than the current VTP revisionBSW13 is configured as a VTP server with a different domain nameCSW13 is configured as a VTP server with the domain name R1DSW13 has a lower VTP configuration revision than the current VTP revisionESW13 is not configured to participate in VTPFSW13 is configured with only VLAN1

多选题Switch R1 is configured with VTP.  Which two VTP modes will make R1 capable of creating and  deleting VLANs on itself? ()AClientBServerCTransparentDPass-throughENo-negotiate

单选题What is the purpose of the command shown below vtp password Fl0r1da()。AIt is used to validate the sources of VTP advertisements sent between switches.BIt is used to access the VTP server to make changes to the VTP configuration.CIt allows two VTP servers to exist in the same domain, each configured with different passwords.DIt is the password required when promoting a switch from VTP client mode to VTP server mode.EIt is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.

单选题Which of these best describes the actions taken when a VTP message is received on a switch configured with the VTP mode "transparent"? ()A VTP updates are ignored and forwarded out all ports.B VTP updates are ignored and forwarded out trunks only.C VTP updates are made to the VLAN database and are forwarded out trunks only.D VTP updates are ignored and are not forwarded.