Two stations on a LAN transmit at the same time, resulting in a collision. What happens when a collision occurs on the network?（）A、Each device on the Ethernet segment stops transmitting for a short time.B、A jam signal informs all devices that a collision occurred.C、When data transmission resumes, the devices that were involved in the collision have priority to transmit.D、The devices that are involved in the collision stops transmitting for a short time.E、The collision invokes a random back-off algorithm.
Two stations on a LAN transmit at the same time, resulting in a collision. What happens when a collision occurs on the network?（）
- A、Each device on the Ethernet segment stops transmitting for a short time.
- B、A jam signal informs all devices that a collision occurred.
- C、When data transmission resumes, the devices that were involved in the collision have priority to transmit.
- D、The devices that are involved in the collision stops transmitting for a short time.
- E、The collision invokes a random back-off algorithm.
相关考题：
●In the Ethernet LAN，an algorithm was chosen to dynarnically adapt to the number of stations trying to senD．It is called (71) ．(71) A．backward learningB．binary exponential backoffC．spanning treeD．CRC
Two stations on the Ezonexam LAN transmit at the same time, resulting in a collision. What happens when a collision occurs on the network? (Choose all that apply)A．Each device on the Ethernet segment stops transmitting for a short time.B．A jam signal informs all devices that a collision occurred.C．When data transmission resumes, the devices that were involved in the collision have priority to transmit.D．The devices that are involved in the collision stops transmitting for a short time.E．The collision invokes a random back-off algorithm.
Which two statements describe the operation of the CSMA/CD access method, which is in use on the Ezonexam network? (Choose two)A. After a collision, the station that detected the collision has first priority to resend the lost data.B. In a CSMA/CD collision domain, stations must wait until the media is not in use before transmitting.C. In a CSMA/CD collision domain, multiple stations can successfully transmit data simultaneously.D. The use of hubs to enlarge the size of collision domains is one way to improve the operation of the CSMA/CD access method.E. After a collision, all stations run a random backoff algorithm. When the backoff delay period has expired, all stations have equal priority to transmit data.F. After a collision, all stations involved run an identical backoff algorithm and then synchronize with each other prior to transmitting data.
A local-area network(LAN)is a communications network that(125)a variety of devices and provides a(126)for information exchange among those devices. The scope of the LAN is small typically a single building or a cluster(丛)of buildings. The LAN is usually owned by the same organization that owns the(127)devices. The internal data rate of LAN is at least several Mb/s.The basic of LAN communication is broadcasting. At each station, there is a transmitter/receiver that communicates over a(128)shared, By other stations. A transmission from any one station is(129)to and received by all other stations.A．broadcastB．cableC．controlD．interconnectsE．internet
Which of the following devices separates a LAN segment into two collision domains, without affecting the broadcast domain?() A.FirewallB.BridgeC.RepeaterD.Router
In the Ethernet LAN, an algorithm was chosen to dynamically adapt to the number of stations trying to send. It is caned(71).A．backward learningB．binary exponential backoffC．spaanning treeD．CRC
Typically, an IP address refers to an individual host on a particular network. IP also accommodates addresses that refer to a group of hosts on one or more networks. Such addresses are referred to as multicast addresses, and the act of sending a packet from a source to the members of a （1）group is referred to as multicasting. Multicasting done （2）the scope of a single LAN segment is straightforward. IEEE 802 and other LAN protocols include provision for MAC-level multicast addresses. A packet with a multicast address is transmitted on a LAN Segment. Those stations that are members of the （3）multicast group recognize the multicast address and （4）the packet. In this case, only a single copy of the packet is ever transmitted. This technique works because of the （5）nature of a LAN: A transmission from any one station is received by all other station on the LAN.A.numerousB.onlyC.singleD.multicast@@@SXB@@@A.withinB.out ofC.beyondD.cover@@@SXB@@@A.differentB.uniqueC.specialD.corresponding@@@SXB@@@A.rejectB.acceptC.discardD.transmit@@@SXB@@@A.multicastB.unicastC.broadcastD.multiple unicast
What is meant by the term“radio silence”________．A.Stations not directly involved with the on-going distress communications may not transmit on the distress frequency or channelB.Stations remaining off the air to safeguard proprietary informationC.Two three-minute silent periods，at 15 and 45 minutes after the hour，that provide a transmitting“window”for distressed vessels to transmit distress alerts using J3ED.Communications on a distress frequency or channel is banned for 24 hours following the cessation of the distress traffic
Typically, an IP address refers to an individual host on a particular network. IP also accommodates addresses that refer to a group of hosts on one or more networks. Such addresses are referred to as multicast addresses, and the act of sending a packet from a source to the members of a （1）group is referred to as multicasting. Multicasting done （2）the scope of a single LAN segment is straightforward. IEEE 802 and other LAN protocols include provision for MAC-level multicast addresses. A packet with a multicast address is transmitted on a LAN Segment. Those stations that are members of the （3）multicast group recognize the multicast address and （4）the packet. In this case, only a single copy of the packet is ever transmitted. This technique works because of the （5）nature of a LAN: A transmission from any one station is received by all other station on the LAN.空白（4）应选（ ）。 A. RejectB. acceptC. discard D. transmit
Typically，an IP address refers to an individual host on a particular network. IP also accommodates addresses that refer to a group of hosts on one or more networks.Such addresses are referred to as multicast addresses，and the act of sending a packet from a source to the members of a （71）group is referred to as multicasting. Multicasting done （72） the scope of a single LAN segment is straight forward. IEEE 802 and other LAN protocols include provision for MAC-level multicast addresses. A packet with a multicast address is transmitted on a LAN segment.Those stations that are members of the （73）multicast group recognize the multicast address and （74）the packet.In this case,only a single copy of the packet is ever transmitted.This technique works because of the （本题）nature of a LAN:A transmission from any one station is received by all other stations on the LAN. A .multicastB. unicastC.broadcastD.multiple unicast
Typically，an IP address refers to an individual host on a particular network. IP also accommodates addresses that refer to a group of hosts on one or more networks.Sunch addresses are referred to as multicast addresses，and the act of sending a packet from a source to the members of a （作答本题）group is referred to as multicasting. Multicasting done （72） the scope of a single LAN segment is straight forward. IEEE 802 and other LAN protocols include provision for MAC-level multicast addresses. A packet with a multicast address is transmitted on a LAN segment.Those stations that are members of the （73）multicast group recognize the multicast address and （74）the packet.In this case,only a single copy of the packet is ever transmitted.This technique works because of the （75）nature of a LAN:A transmission from any one station is received by all other stations on the LAN. A. numerousB. onlyC. singleD.multicast
Typically，an IP address refers to an individual host on a particular network. IP also accommodates addresses that refer to a group of hosts on one or more networks.Sunch addresses are referred to as multicast addresses，and the act of sending a packet from a source to the members of a （71）group is referred to as multicasting. Multicasting done （72） the scope of a single LAN segment is straight forward. IEEE 802 and other LAN protocols include provision for MAC-level multicast addresses. A packet with a multicast address is transmitted on a LAN segment.Those stations that are members of the （73）multicast group recognize the multicast address and （本题）the packet.In this case,only a single copy of the packet is ever transmitted.This technique works because of the （75）nature of a LAN:A transmission from any one station is received by all other stations on the LAN. A. rejectB .acceptC. discardD. transmit
Which two pieces of information does the Cisco WLC v5.2 client monitor feature provide about a VoWLAN client?（）A、RSSI of the client at the access pointB、WMM stateC、current MOS valueD、current RF channelE、current transmit data rate
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller. Which message would best describe the establishment ofthe tunnel from the foreign controller’s perspective？（）A、Transmit Mobile Anchor Export messageB、Receive Mobile Anchor Export messageC、Transmit Plumbing duplex mobility tunnel messageD、Receive Plumbing duplex mobility tunnel message
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller. Which message would best describe the establishment of the tunnel from the foreign controller’sperspective？（）A、Received Mobile Anchor Export messageB、Transmit Plumbing duplex mobility tunnel messageC、Received Plumbing duplex mobility tunnel messageD、Transmit Mobile Anchor Export message
In an Ethernet network, under what two scenarios can devices transmit?（）A、when they receive a special tokenB、when there is a carrierC、when they detect no other devices are sendingD、when the medium is idleE、when the server grants access
Which of the following devices separates a LAN segment into two collision domains, without affecting the broadcast domain?（）A、FirewallB、BridgeC、RepeaterD、Router
多选题If a SONET/SDH interface transmit link fails between two JUNOS devices, which two alarms or defects would be seen on those devices?（）ALOSBREICBIP-B3DRDI
单选题The FEC mode is for（）from（）station to two or more other stations when available.Areceiving messages/one stationBtransmission/ one coast station or shipCcommunicating /one shipDcontacting/other
单选题CATEGORY A EPIRB’s transmit on frequencies that are monitored by（）.Aorbiting satellites in spaceBcommercial radio stationsCprivate，commercial，and military aircraftDordinary radio stations
单选题The list of Coast Stations is republished（）in a trilingual.Aevery two yearsBevery three yearsCevery yearDevery four years
多选题In an Ethernet network, under what two scenarios can devices transmit?（）Awhen they receive a special tokenBwhen there is a carrierCwhen they detect no other devices are sendingDwhen the medium is idleEwhen the server grants access
多选题Which two statements about authentication settings for DCNM-LAN are true？ （）AIf none of the authentication servers that are configured for the current authentication mode responds to an authentication request， the DCNM-LAN server falls back to localauthentication.BDCNM-LAN only supports TACACS+.CEach DCNM-LAN server will have the same device credentials.DAdministering DCNM-LAN authentication settings requires an authentication license.EDCNM-LAN server users are local to the DCNM-LAN server.
单选题A call between any two ship stations on an intership working frequency shall have a maximum duration of（）.A2 minutesB3 minutesC4 minutesD5 minutes
单选题The ARQ mode should be applied（）.Awhen two stations communicate with each otherBin any radio system and at any timeCwhen one ship sends a message to another stationDfor communication among some stations
多选题Which two pieces of information does the Cisco WLC v5.2 client monitor feature provide about a VoWLAN client?（）ARSSI of the client at the access pointBWMM stateCcurrent MOS valueDcurrent RF channelEcurrent transmit data rate
单选题All Loran-C transmitting stations are equipped with cesium frequency standards which permit （）.Aevery station in one chain to transmit at the same timeBeach station to transmit without reference to another stationCon-line transmission of single-line transmitters at the same timeDeach station to only depend on the master for synchronization and signal ratio