A local-area network(LAN)is a communications network that(125)a variety of devices and provides a(126)for information exchange among those devices. The scope of the LAN is small typically a single building or a cluster(丛)of buildings. The LAN is usually owned by the same organization that owns the(127)devices. The internal data rate of LAN is at least several Mb/s.The basic of LAN communication is broadcasting. At each station, there is a transmitter/receiver that communicates over a(128)shared, By other stations. A transmission from any one station is(129)to and received by all other stations.A．broadcastB．cableC．controlD．interconnectsE．internet
A local-area network(LAN)is a communications network that(125)a variety of devices and provides a(126)for information exchange among those devices. The scope of the LAN is small typically a single building or a cluster(丛)of buildings. The LAN is usually owned by the same organization that owns the(127)devices. The internal data rate of LAN is at least several Mb/s.The basic of LAN communication is broadcasting. At each station, there is a transmitter/receiver that communicates over a(128)shared, By other stations. A transmission from any one station is(129)to and received by all other stations.
A．broadcast
B．cable
C．control
D．interconnects
E．internet
相关考题：
某局域网用一台路由器互连4个子网，各子网的网络地址分别是193．22．56．0／26、193．22．56．64／26、193．22．56．128／26和193．22．56．192／26。使用RIPvl路由协议配置参与RIP协议的网络地址，其正确的配置是——。A．network 193．22．56．0 255．255．255．192B．network 193．22．56．0 0．0．0．255C．network 193．22．56．0 255．255．255．192 network 193．22．56．64 255．255．255．192 network 193．22．56．128 255．255．255．192 network 193．22．56．192 255．255．255．192D．network 193．22．56．0
下列哪个network命令会告知此路由器开始使用IP地址为10.1.1.1、10.1.100.1和10.1.120.1的接口上的OSPF（）A.network 10.0.0.0 255.0.0.0 area 0B.network 10.0.0.0 0.255.255.255 area 0C.network 10.0.0.1 0.0.0.255 area 0D.network 10.0.0.1 0.0.255.255 area 0
路由器R1的拓扑连接和地址分配如下图所示，如果在R1上安装OSPF协议，运行命令：router ospf 200，则配置E0和E1端口的命令分别是______。A．network 10.1.1.0 255.255.255.0 area 0 network 192.168.1.0 255.255.255.0 area 1B．network 10.1.1.1 255.255.255.0 area 0 network 192.168.1.1 255.255.255.0 area 1C．network 10.1.1.255 0.0.0.8 area 0 network 192.168.1.255 0.0.0.8 area 1D．network 10.1.1.0 0.0.0．255 area 0.0.0.0 network 192.168.1.0 0.0.0.255 area 1
WhichofthefollowingClassAnetworksisreservedfor"privatenetworks"useonly?() A.network10.0.0.0B.network127.0.0.0C.network129.135.0.0D.network192.168.0.0
The Testking Network consists of the following 5 IP networks:NETWORK 1: 192.168.10.0/26NETWORK 2: 192.168.10.64/27NETWORK 3: 192.168.10.96/27NETWORK 4: 192.168.10.128/30NETWORK 5: 192.168.10.132/30Which of the following routing protocols will support this IP addressing scheme?（）A. RIP version 1B. RIP version 2C. IGRPD. EIGRPE. OSPFF. BGP
The EIGRP configuration in the Glencoe router uses a single network statement.From the output shown in the graph would advertise these networks in EIGRP?() A.network 172.26.168.0 area 478B.network 172.26.0.0C.network 172.26.168.128 0.0.0.127D.network 172.26.168.128 area 478
Which routing protocols will support the following IP addressing scheme? （）Network 1 - 192.168.10.0 /26Network 2 - 192.168.10.64 /27Network 3 - 192.168.10.96 /27Network 4 - 192.168.10.128 /30Network 5 - 192.168.10.132 /30A.RIP version 1B.RIP version 2C.IGRPD.EIGRPE.OSPF
RHEL7系统的网卡配置文件所在目录为（）A．/etc/network/config/B．/etc/config/network/C．/etc/system/network/D．/etc/sysconfig/network-scripts/
下列命令中，正确的是：A．network 172.16.1.0 0.0.0.255 area 1B．network 172.16.1.0 255.0.0.0 area 0C．network 172.16.0.0 255.255.0.0 area 0D．network 172.16.1.0 255.255.255.0 area 1
【单选题】要在路由器 B 上为所有相连网络启用 RIP，正确的命令是怎样的？A．RouterB# router rip RouterB(router)# network 210.36.7.0 RouterB(router)# network 220.17.29.0 RouterB(router)# network 211.168.74.0B．RouterB(config)# router rip RouterB(config-router)# network 198.16.4.0 RouterB(config-router)# network 211.168.74.0 RouterB(config-router)# network 199.84.32.0C．RouterB(config)# configure router rip RouterB(config-router)# network 210.36.7.0 RouterB(config-router)# network 199.84.32.0 RouterB(conf