Which VTP mode should a Cisco switch be set to if this switch is to add or delete VLANs to a management domain?（）A、TransparentB、ServerC、AutoD、ClientE、User
Which VTP mode should a Cisco switch be set to if this switch is to add or delete VLANs to a management domain?（）
- A、Transparent
- B、Server
- C、Auto
- D、Client
- E、User
相关考题：
某局域网内交换机为VTP SERVER,VTP Domain Name:CISCO,Configuration Revision:4,下面哪台交换机可以同步到它的VTP配置()。 A.Mode：Transparent，Domain Name：CISCO，Configuration Revision：3B.Mode：Client，Domain Name：CISCO，Configuration Revision：3C.Mode：Client，Domain Name：CISCO，Configuration Revision：5D.Mode：Client，Domain Name：CISCO1，Configuration Revision：3
Which VTP mode should a Cisco switch be set to if this switch is to add or delete VLANs to a management domain?A．TransparentB．ServerC．AutoD．ClientE．User
阅读下面的配置信息，将(1)～(4)处空缺的内容填写在相应位置。SW1＞enable (进入特权模式)SW1vlan database (进入VLAN配置子模式)SW1(vlan)vtp server (设置本交换机为Server模式)SW1(vlan)vtp domain (1) (设置域名)SW1(vlan) (2) (启动修剪功能)SW1(vlan)exit (退出VLAN配置模式)SW1show (3) (查看VTP设置信息)VTP Vetsion :2Configuration Revision :0Maximum VLANs supported locrlly :64Number of existing VLANs :1VTP Operating Mode :ServerVTP Domain Name :Server1VTP Pruning Mode :EnableVTP V2 Mode :DisabledVTP Traps Generation :DisabledMD5 digest :0x82 0x6B 0xFB 0x94 0x41 0xEF 0x92 0x30Configuration last modified by 0.0.0.0 at 7-1-05 00:07:51SW2vlan databaseSW2(vlan)vtp domain NULLSW2(vlan) (4)Setting device to VTP CLIENT mode.SW2(vlan)exit
The Ezonexam network administrator has issued the "VTP password ezonexam" command on a Cisco device. What is the purpose of this command?A．It allows two VTP servers to exists in the same domain, each configured with different passwordsB．It is the password required when promoting a switch from VTP client mode to VTP server modeC．It is used to access the VTP server to make changes to the VTP configurationD．It is used to validate the sources of VTP advertisements sent between switchesE．None of the above
阅读以下的配置信息，将(1)～(4)处空缺的内容填写相应的位置。SW1＞enable //进入特权模式SW1vlan database //进入vlan配置子模式SW1(lan)vtp server //设置本交换机为Server模式SW1(lan)vtp domain(1) //设置域名SW1(lan)(2) //启动修剪功能SW1(lan)exit //退出vlan配置模式SW1(lan)(3) //查看vtp设置信息VTP version:2Configuration Revision:0Maximum VLANs supported locally:64Number of existing VLANs:1VTP Operating Mode:ServerlVTP domain Name:ServerlVTP pruning Mode:EnableVTP V2 Mode:DisabledVTP Traps Generation:DisabledMD5 digest:0x82 0x6B 0xFB 0x94 0xEF 0x92 0x30Configuartion last modified by 0.0.0.0 at 7-1-05 00:07:51SW2vlan databaseSW2(vlan)vtp domain NULLSW2(vlan)(4)Swtting device to VTP CLIENT modeSW2(vlan)exit
Assuming the default switch configuration,which approach should you use to configure the extended vlan range(1006 through 4094) on a cisco catalyst 3750 series switch?() A. Configure the switch to be in VTP client mode.B. Configure the switch to be in VTP domaint mode.C. Configure the switch to be in VTP transparent mode.D. Configure the switch to be in VTPv2.
Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?() A. clientB. dynamicC. serverD. staticE. transparent
A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?（）A.#vtp domain unsetB.#delete vlan.datC.#no vtp domainD.#vtp domain null
Assuming default setting,how can you erase the VTP database of VLANs on a CISCO IOS switch running in VTP server mode?() A.Enable VTP pruningB.From privileged mode，erase the startup configuration file，then reload.C.From privileged mode，erase the vlan date file，then reload.D.Cycle the switch power.
图1中交换机同属一个VTP域。除交换机B外，所有交换机的VLAN配置都与交换机A相同。交换机A和B的VTP工作模式的正确配置是______。A) set vtp mode transparent和set vtp mode serverB) set vtp mode server和set vtp mode transparentC) set vtp mode server和set vtp mode clientD) set vtp mode server和set vtp mode serverA．B．C．D．
下图中交换机同属一个VTP域。除交换机B外，所有交换机的VLAN配置都与交换机A相同。交换机A和B的VTP工作模式的正确配置是( )。A) set vtp mode transparent和set vtp mode serverB) set vtp mode server和set vtp mode transparentC) set vtp mode server和set vtp mode clientD) set vtp mode server和set vtp mode server
Which of these best describes the actions taken when a VTP message is received on a switch configured with the VTP mode "transparent"？（）A、VTP updates are ignored and forwarded out all portsB、VTP updates are ignored and forwarded out trunks onlyC、VTP updates are made to the VLAN database and are forwarded out trunks onlyD、VTP updates are ignored and are not forwarded
Which two statements correctly describe VTP？（）A、Transparent mode always has a configuration revision number of 0.B、Transparent mode cannot modify a VLAN database.C、Client mode cannot forward received VTP advertisements.D、Client mode synchronizes its VLAN database from VTP advertisements.E、Server mode can synchronize across VTP domains.
A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by are load of the swith,will reset the VTP management domain name of the switch to a NULL value?（）A、#vtp domain unsetB、#delete vlan.datC、#novtp domainD、#vtp domain null
You are configuring an 802.1Q trunk between a Layer 2 switch and a firewall. You read in the documentation that the best way to set up a trunk is to set the port as dynamic desirable. The trunk is not coming up. Which one of these options would be a valid explanation？ （）A、The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode ONB、The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode to OFFC、The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode asauto.D、The firewall does not support DTP. You should set the switchport trunk mode to ON
A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?（）A、#vtp domain unsetB、#delete vlan.datC、#no vtp domainD、#vtp domain null
Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?（）A、clientB、dynamicC、serverD、staticE、transparent
Assuming default setting，how can you erase the VTP data base of VLANs on a CISCO IOS switch running in VTP server mode？（）A、Enable VTP pruningB、From privileged mode，erase the startup configuration file，then reload.C、From privileged mode，erase the vlandate file，then reload.D、Cycle the switch power.
A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration?（）A、A switch in the VTP client mode cannot update its local VLAN database.B、A trunk link must be configured between the switches to forward VTP updates.C、A switch in the VTP server mode can update a switch in the VTP transparent mode.D、A switch in the VTP transparent mode will forward updates that it receives to other switches.E、A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision number.F、A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP domain membership.
单选题Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?（）AclientBdynamicCserverDstaticEtransparent
单选题A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by are load of the swith,will reset the VTP management domain name of the switch to a NULL value?（）A#vtp domain unsetB#delete vlan.datC#novtp domainD#vtp domain null
多选题Which two statements correctly describe VTP？（）ATransparent mode always has a configuration revision number of 0.BTransparent mode cannot modify a VLAN database.CClient mode cannot forward received VTP advertisements.DClient mode synchronizes its VLAN database from VTP advertisements.EServer mode can synchronize across VTP domains.
单选题Assuming the default switch configuration，which approach should you use to configure the extended vlan range（1006 through 4094） on a cisco catalyst 3750 series switch？（）AConfigure the switch to be in VTP client mode.BConfigure the switch to be in VTP domaint mode.CConfigure the switch to be in VTP transparent mode.DConfigure the switch to be in VTPv2.
单选题A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?（）A#vtp domain unsetB#delete vlan.datC#no vtp domainD#vtp domain null
单选题Which VTP mode should a Cisco switch be set to if this switch is to add or delete VLANs to a management domain?（）ATransparentBServerCAutoDClientEUser