Your network uses IPv4. You install a server that runs Windows Server 2008 R2 at a branch office. The server is configured with two network interfaces.You need to configure routing on the server at the branch office. Which two actions should you perform？（）A、Install the Routing and Remote Access Services role service.B、Run the netsh ras ip set access ALL command.C、Run the netsh interface ipv4 enable command.D、Enable the IPv4 Router Routing and Remote Access option.
Your network uses IPv4. You install a server that runs Windows Server 2008 R2 at a branch office. The server is configured with two network interfaces.You need to configure routing on the server at the branch office. Which two actions should you perform？（）
- A、Install the Routing and Remote Access Services role service.
- B、Run the netsh ras ip set access ALL command.
- C、Run the netsh interface ipv4 enable command.
- D、Enable the IPv4 Router Routing and Remote Access option.
相关考题：
Your network uses the172.12.0.0 class B address. You need to support 459 hosts per subnet, while accommodating the maximum number of subnets. Which mask would you use?A．255.255.0.0.B．255.255.128.0.C．255.255.224.0.D．255.255.254.0.E．None of the above
Your computer uses both wired and wireless network connections. The networks are not connected to each other.You disallow incoming connections in Microsoft Windows Firewall. You create a shared folder. Users on the wireless network cannot access the shared folder. You need to allow access to the shared folder from the wireless network. You also need to maintain the security of the wired network.What should you do?（）A.AB.BC.CD.D
Your wireless network is not listed in the Connect to a network window of your computer. You need to connect to your wireless network.Which two actions should you perform?() A.AB.BC.CD.DE.E
You have a computer that runs Windows Vista. You create a virtual private network (VPN) connection between the computer and your company’s network.You notice that while the computer is connected through the VPN connection, users on the company network can access shared folders on the computer.You need to prevent network users from accessing your shared folders when you are connected to the company’s network by using the VPN connection.What should you do?（）A.AB.BC.CD.D
You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?（）A、STPB、GVRPC、SNMPD、VTPE、DHCP
You are the network administrator for passguide.com. Which device will you install in your computer to make wireless connections you and a network?（）A、RepeaterB、Wireless routerC、HubD、Wireless network adapter
Your network uses the172.12.0.0 class B address. You need to support 459 hosts per subnet, while accommodating the maximum number of subnets. Which mask wouldyou use?（）A、255.255.0.0.B、255.255.128.0.C、255.255.224.0.D、255.255.254.0.
Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）A、The bindings.B、A DNS address.C、A Gateway address.D、A WINS server address.E、A DHCP server address.
Your network uses IPv4. You install a server that runs Windows Server 008 at a brach office. The server is configured with two network interfaces. You need to configure routing on the server at the branch office. Which two actions should you perform？（） A、 Install the Routing and Remote Access role.B、 Run the netsh ras ip set access ALL commandC、 Run the netsh interface ipv4 enable commandD、 Enable the IPv4 Router Routing and Remote Access option
You share your portable computer with a co-worker. You use separate user accounts to log on. A wireless network is available to you and your co-worker. You need to prevent your co-worker from modifying your wireless network profile. What should you do？（）A、Disable the Connect even if the network is not broadcasting option.B、In the Network and Sharing Center window， click the Diagnose and repair option.C、Set the default wireless profile type to the Use all-users only profile （recommended） option. Recreate the wireless network.D、Set the default wireless profile type to the Use all-users and per-user profiles option. Recreate the wireless network by using the Save this network for me only option.
Your network consists of a single Active Directory domain. The network contains a file server that runs Windows Server 2008 R2. All servers use internal storage only. You plan to deploy a client/server application. You need to deploy the application so that it is available if a single server fails. You must achieve this goal while minimizing costs. What should you do？（）A、Deploy RemoteApp.B、Deploy a failover cluster that uses No Majority： Disk Only.C、Deploy a failover cluster that uses Node and File Share Disk Majority.D、Deploy Distributed File System （DFS） and configure replication.
You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）A、Restart the computer in the docking station.B、Run the Add/Remove Hardware wizard.C、Use Device Manager to scan for hardware changes.D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.E、Install the new network adapter driver.
Your computer uses both wired and wireless network connections. The networks are not connected to each other. You disallow incoming connections in Microsoft Windows Firewall. You create a shared folder. Users on the wireless network cannot access the shared folder. You need to allow access to the shared folder from the wireless network. You also need to maintain the security of the wired network. What should you do？（）A、Turn off the Windows Firewall feature.B、Disable the Block all incoming connections option.C、Turn off the Spyware and other malware protection option.D、Enable the File and Printer Sharing exception in the firewall settings of the wireless network adapter.
Your network is configured as shown in the following diagram. Each office contains a server that has the File Services server role installed. The servers have a shared folder named Resources. You need to plan the data availability of the Resources folder. Your plan must meet the following requirements： èIf a WAN link fails，the files in the Resources folder must be available in all of the offices. èIf a single server fails， the files in the Resources folder must be available in each of the branch offices，and the users must be able to use existing drive mappings. èYour plan must minimize network traffic over the WAN links. What should you include in your plan？（）A、a stand-alone DFS namespace that uses DFS Replication in a full mesh topologyB、a domain-based DFS namespace that uses DFS Replication in a full mesh topologyC、a stand-alone DFS namespace that uses DFS Replication in a hub and spoke topologyD、a domain-based DFS namespace that uses DFS Replication in a hub and spoke topology
Your companys corporate network uses Network Access Protection （NAP）. Users are able to connect to the corporate network remotely. You need to ensure that data transmissions between remote client computers and the corporate network are as secure as possible. What should you do（）？ A、Apply an IPsec NAP policy.B、Configure a NAP Policy for 802.1x Wireless connectionsC、Configure VPN connections to use MS-CHAP v2 authenticationD、Restrict Dynamic Host Configuration Protocol （DHCP） clients by using NAP
多选题Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？ （）ATunnel IPv6 over IPv4 to connect far-end IPv6 networksBExplain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possibleCExplain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possibleDWhat is the meaning of EUI-64 and how does it work？ETunnel IPv4 over IPv6 to connect far-end IPv4 networks.
单选题Your company has just upgraded its CATAGORY 5 Ethernet network from 10Mbps to 100Mbps. After the upgrade， the 20 Windows 2000 Professional computers in the marketing department can no longer connect to the network. The remaining 80 Windows 2000 computers in the company can connect， however. Your company uses NWLink as the only network protocol.You need to connect the computers in the marketing department to the network. What must you do？ （）AConfigure the NWLink frame type of the network adapters to be ethernet 802.3.BConfigure the NWLink frame type of the network adapters to be ethernet II.CReplace the network adapters with 10/100 BNC adapters.DReplace the network adapters with 10/100 UTP network adapters.
多选题Your network uses IPv4. You install a server that runs Windows Server 2008 R2 at a branch office. The server is configured with two network interfaces.You need to configure routing on the server at the branch office. Which two actions should you perform？（）AInstall the Routing and Remote Access Services role service.BRun the netsh ras ip set access ALL command.CRun the netsh interface ipv4 enable command.DEnable the IPv4 Router Routing and Remote Access option.
单选题You want to connect your Windows 2000 Professional computer to multiple TCP/IP subnets on your company’s network. Your computer currently has an ISA network adapter installed. You install a second ISA network adapter. After you restart your computer， you notice that the second ISA network adapter is not functioning. What should you do？（）ASet the driver signing option to block.BSet the driver signing option to ignore.CIn the computer’s BIOS， reserve an unused IRQ for ISA devices.DIn the Device Manager， configure the second ISA network adapter to use an unused IRQ.
多选题Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）AThe bindings.BA DNS address.CA Gateway address.DA WINS server address.EA DHCP server address.
单选题You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?（）ASTPBGVRPCSNMPDVTPEDHCP
单选题You use a Windows 2000 Professional portable computer both at the office and at home. In the office youconnect the portable computer to a docking station and use Internet Explorer to access the Internetthrough your LAN connection.At home， you configure a new dial-up connection to the Internet. Now when you attempt to access theInternet from the office you are prompted to connect via your dial-up connection. When you cancel thismessage， you can only work offline and cannot access the Internet.You want to maintain your dial-up connection for home use and your ability to access the Internet whenconnected to the company LAN. What should you do？（）AReconfigure the dial-up connection to dial-up to a private network.BCreate another connection that uses a virtual private network （VPN） to connect to a privatenetwork though the Internet.CConfigure Internet Explorer to automatically detect proxy settings.DConfigure Internet Explorer to dial whenever a network connection is not present.
单选题Your network contains a wired network and a wireless network. Users report that they experience intermittent problems accessing network resources when they connect to the internal wireless network. You discover that an unsecured rogue wireless access point uses the same Service Set Identifier (SSID) as the internal wireless network. You need to ensure that the users only connect to the internal wireless network. What should you do?（）AConfigure a Windows Connect Now Group Policy.BConfigure a Wireless Network (IEEE 802.11) Policy.CDelete the rogue network from the Network and Sharing Center on each computer.DCreate a Connection Manager Administration Kit (CMAK) profile and deploy it to all users.
单选题You use a Windows 2000 Professional portable computer both at the office and at home. In the office you connect the portable computer to a docking station and use Internet Explorer to access the Internet through your LAN connection. At home, you configure a new dial-up connection to the Internet. Now when you attempt to access the Internet from the office you are prompted to connect via your dial-up connection. When you cancel this message, you can only work offline and cannot access the Internet. You want to maintain your dial-up connection for home use and your ability to access the Internet when connected to the company LAN. What should you do?（）AReconfigure the dial-up connection to dial-up to a private network.BCreate another connection that uses a virtual private network （VPN） to connect a private network though the Internet.CConfigure Internet Explorer to automatically detect proxy settings.DConfigure Internet Explorer to dial whenever a network connection is not present.
多选题Your network uses ipv4. You install a server that runs windows server 008 at a brach office. The server is configured with two network interfaces. You need to configure routing on the server at the branch office. Which two actions should you perform? （）AInstall the routing and remote access role.BRun the netsh ras ip set access ALL command.CRun the netsh interface ipv4 enable command.DEnable the IPV4 router routing and remote access option.
多选题You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）AConfigure a HOSTS file.BConfigure a LMHOSTS file.CConfigure a WINS server database.DConfigure a DHCP server address.EConfigure at least one DNS address.
单选题Your network contains an Active Directory forest. The functional level of the forest is Windows Server 2008 R2.You plan to deploy DirectAccess.You need to configure the DNS servers on your network to support DirectAccess.What should you do？（）AModify the GlobalQueryBlockList registry key and restart the DNS Server service.BModify the EnableGlobalNamesSupport registry key and restart the DNS Server service.CCreate a trust anchor that uses a certificate issued by an internal certification authority (CA).DCreate a trust anchor that uses a certificate issued by a publicly trusted certification authority (CA).
单选题You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter. Your computer is able to access the Internet but is unable to discover other computers in the local wireless network. You need to configure the wireless connection to allow your computer to discover other computers. What should you do？（）AConfigure the network category of your wireless network connection to Private.BConfigure the network category of your wireless network connection to Public.CConfigure the TCP/IP packet filtering on the wireless network connection.DConfigure the wireless network connection with the appropriate authentication to the router.