Following a successful cluster fallover， clstat returns no status， the snmpinfo command hangs. All Cluster resources appear to be active. What should be done to resolve this problem？（） A、 Restart all cluster nodes.B、 Verify that cluster.es.client.rte is installed on all nodes.C、 Use chssys -a -d -p -s clcomdES to enable cluster communication.D、 Use the /usr/sbin/snmpv3_ssw-1 command to revert SNMP from version 3 to version 1.
Following a successful cluster fallover， clstat returns no status， the snmpinfo command hangs. All Cluster resources appear to be active. What should be done to resolve this problem？（）
- A、 Restart all cluster nodes.
- B、 Verify that cluster.es.client.rte is installed on all nodes.
- C、 Use chssys -a -d -p -s clcomdES to enable cluster communication.
- D、 Use the /usr/sbin/snmpv3_ssw-1 command to revert SNMP from version 3 to version 1.
相关考题：
A cluster script failed because it was unable to set the hostname， and the Cluster Manager reported the event failure. What must be done prior to sue the "HACMP Problem Determination Tools" - "Recover From Script Failure" to have the Cluster Manager resume cluster processing？（） A、 Nothing， the "Recover From Script Failure" will correct the issue.B、 Disable and re-enable the effected Ethernet adapter by using ifconfig.C、 Correct the error by setting the hostname on the effected node from the command line.D、 Verify that the clinfo daemon is running prior to executing the "recover from scriptfailure".
An administrator has added an additional network adapter to each cluster node. The adapters have been configured and tested， and the /etc/hosts file has been updated. However，the adapters do not appear in the pick list when the administrator tries to define the adapters to HACMP. What would be required to correct this problem？（） A、 Rerun autodiscovery.B、 Synchronize the cluster.C、 Restart cluster services.D、 Delete and recreate the adapters.
During a cluster functionality test， and administrator performs a graceful stop for Node ’B’ in a three-node cluster. What is the expected state of the cluster after Node ’B’successfully completes？（） A、 All cluster resources halt on Node ’B’，and one or both surviving nodes will gracefully acquire the resources.B、 All cluster processes halt on Node ’B’，the cluster resources remain active，and the remaining nodes take no action.C、 All cluster processes stay active on Node ’B’，cluster resources are halted，and the remaining nodes take no action.D、 All cluster resources will stop，cluster processes halt on Node ’B’，and the remaining cluster nodes take no action.
A cluster node has a failed fibre adapter requiring the node to be halted to replace it. To minimize downtime， what is the appropriate method of performing this repair？（）A、 Perform the cIRGmove command to move the node’s resources to another cluster node.B、 Perform a graceful stop of the cluster，replace the adapter，and restart the cluster.C、 Perform a force stop of the cluster node，replace the adapter，and restart the cluster. D、 Perform a graceful takeover of the cluster，replace the adapter，and restart the cluster.
The IP subsystem fallover behavior of a two-node cluster is being testing in a large client organization. One of the tests is to simulate a network_down event and verify that HACMP movesthe single resource group to the standby node. What is the best way to simulate a network down condition？（） A、 Turn off the IP core switch connecting the two nodes.B、 Issue the command "stopsrc -g inetd" on the node that has the resource group.C、 Issue the command "sh /etc/rc.tcpclean" on the node that has the resource group.D、 Simultaneously unplug all network cables from the node that has the resource group.
A cluster administrator is performing fallover testing during a scheduled system outage. Node ’A’ Was forced down and eventually rebooted. When Node ’A’ reintegrates into the cluster， the resource group state is offline. No errors are found in reviewing the hacmp.out file. What could have been done to ensure the resource group was acquired when cluster processing was restarted on Node ’A’？（）A、 Nothing，HACMP does not require them automatically.B、 Force the remaining nodes down，then reintegrate them all.C、 Select reacquire resources after forced down on start menu.D、 Create a setting timer to bring the resource group online.
An administrator runs clstat on a cluster node and receives the following response： ’Can not get Cluster Information.’ Which of the following daemons may need to be started in order to correct this problem？（）A、 topsvcsB、 clinfoESC、 snmpinfoD、 clsmuxpdES
The snmpinfo command can be sued to obtain information about the current state of a running cluster. Which of the following will provide an administrator with a complete list of information from the cluster MIB？（） A、 snmpinfo -m get -o /usr/es/sbin/cluster/hacmp.defs -v clusterB、 snmpinfo -m dump -o /usr/es/sbin/cluster/hacmp.defs -v clusterC、 snmpinfo -m get -o /usr/es/sbin/cluser/hacmp.defs -v clusterState.0D、 snmpinfo -m dump -o /usr/es/sbin/cluster/hacmp.defs -v clusterState.0
An administrator will be performing a PowerHA upgrade on a cluster from version 5.3 to version 5.5. Which ofthe following tasks will verify a successful migration？（）A、Use the clstat command and verify the cluster is in a stable stateB、After each node is upgraded， run a verification and synchronizationC、After all nodes are upgraded， run a verification and synchronizationD、Take a snapshot of each node and verify the configuration is the same
A step in the HACMP test plan is to gracefully stop the cluster on a node and to verify that the Shared resources fallover to the standby node. To prepare for this testing step， both nodes in the two-node cluster are in a stable state with the single resource group active on Node ’A’. Which of the following is the best way to execute this portion of the test plan？（） A、 Execute "lssrc -g cluster stop" on Node ’A’B、 Execute "cat /etc//motd /dev/kmem" on Node ’A’C、 Execute "/usr/es/sbin/cluster/utilities/sclstop -gr" on Node ’A’D、 Find the pid of cluster manager daemon on Node ’A’ and issue a "kill-9" against the pid
Company.com performs cluster verification every Sunday night with a corn job. The systems administrator reviews the /var/hacmp/clverify/clverify.log on Monday morning and notice that cluster verification posted a message about inconsistent filesystem names in one of the shared volume groups. What should the administrator do？（） A、 Cause a fallover to occur on the resource group.B、 Export the volume groups and re-import them on all nodes.C、 Run an importvg -L command on all the nodes in the cluster.D、 Investiage recent changes to the shared volume group and use C-SPOC to correct inconsistencies.
The first step documented in Company.com’s HACMP test plan is to start the cluster manager on the normal service node and verify that HACMP daemons have started with the ’lssrc -g cluster" command. What daemons MUST show as active in the ’lssrc -g cluster" command to have an operational cluster？（） A、 clstrmgrES，clsmuxpdESB、 topsvcsd，grpsvcsd，exaixosC、 topsvcsd，grpsvcsd，clinfoES，grglsmdD、 clstrmgrES，clsmuxpdES，topsvcsd，grpsvcsd
An administrator has a two-node PowerHA cluster in a mutual takeover configuration. He needs to updatefrom 5.5 service pack 1 to 5.5 service pack 2. Which of the following actions will perform the updates with norisk of disruption to applications running in the cluster？（）A、Unmanage resource groups on all nodes， update the cluster filesets， start cluster services on all nodes，ensure cluster services stabilizeB、Update the cluster filesets on all nodes. Run ’refresh -s clstrmgrES’ on one node， wait for the cluster tostabilize， repeat for all other nodesC、Unmanage resource groups on one node， update the cluster filesets， start cluster services. Wait for thecluster to stabilize and repeat for all other nodes.D、Bring resource groups （RGs） online on all nodes concurrently， bring RGs offline on one node， update thecluster filesets， bring RGs online， repeat for all other nodes
Which of the following commands will display a snapshot of cluster status， including details of current networkstatus and resource group fallover/fallback policies？（）A、cldumpB、cllssvcsC、clshowresD、clstat -o
Your environment includes a Windows Server 2008 R2 Hyper-V failover cluster. You manage the virtual environment by using Microsoft System Center Virtual Machine Manager （VMM） 2008 R2. You plan to perform maintenance on the Hyper-V failover cluster. You need to complete the maintenance on the failover cluster while maximizing the uptime of the virtual machines （VMs）. What should you do prior to starting maintenance on each cluster node？（）A、Use Failover Cluster Manager to pause the cluster nodeB、Use Failover Cluster Manager to perform a quick migration of all VMs to another cluster nodeC、Use VMM to place the cluster node in maintenance modeD、Use VMM to pause all VMs and move them to another cluster node
You are the network administrator for your company. The network consists of a single Active Directory domain. All computers on the network are members of the domain. You administer a four-node Network Load Balancing cluster. All nodes run Windows Server 2003. The cluster has converged successfully. You use Network Load Balancing Manager on the default host to configure all nodes of the cluster. The nodes have a single network adapter and are connected to the same switching hub device. Administrators of non-cluster servers that are connected to the same switching hub device report that their servers receive traffic that is destined for the cluster nodes. Receiving this additional network traffic impairs the network performance of the non-cluster servers. You need to ensure that traffic destined for only the cluster nodes is not sent to all ports of the switching hub device. You do not want to move the cluster to another switching hub device. What should you do？ （）A、 On one node， run the nlb.exe reload command.B、 On each node， run the wlbs.exe drainstop command.C、 Use Network Load Balancing Manager to enable Internet Group Management Protocol （IGMP） support on the cluster.D、 Use Network Load Balancing Manager to add a second cluster IP address.
Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’ is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elements for the resource group have been acquired. The administrator who is conducting the HACMP test starts the HACMP daemons on Node ’B’ with the ’smitty clstart" command. The administrator notices that Node ’B’ acquires the elements of the resource group， including a service IP labels，a shared volume group， and an application server that has been started. The expectation was that Node ’B’ would enter the cluster in a standby status， rather than acquiring production resources. What should the administrator do to correct this problem？（） A、 Change the cluster to a rotating design.B、 Change the Cascading without Fallback flag to true.C、 Change the Inactive Takeover field to false in the cluster configuration.D、 Nothing should be done. This is the default behavior for cascading resource groups，and node ’A’ should have been started first.
单选题A cluster administrator is performing fallover testing during a scheduled system outage. Node ’A’ Was forced down and eventually rebooted. When Node ’A’ reintegrates into the cluster， the resource group state is offline. No errors are found in reviewing the hacmp.out file. What could have been done to ensure the resource group was acquired when cluster processing was restarted on Node ’A’？（）A Nothing，HACMP does not require them automatically.B Force the remaining nodes down，then reintegrate them all.C Select reacquire resources after forced down on start menu.D Create a setting timer to bring the resource group online.
单选题An administrator runs clstat on a cluster node and receives the following response： ’Can not get Cluster Information.’ Which of the following daemons may need to be started in order to correct this problem？（）A topsvcsB clinfoESC snmpinfoD clsmuxpdES
单选题During a cluster functionality test， and administrator performs a graceful stop for Node ’B’ in a three-node cluster. What is the expected state of the cluster after Node ’B’successfully completes？（）A All cluster resources halt on Node ’B’，and one or both surviving nodes will gracefully acquire the resources.B All cluster processes halt on Node ’B’，the cluster resources remain active，and the remaining nodes take no action.C All cluster processes stay active on Node ’B’，cluster resources are halted，and the remaining nodes take no action.D All cluster resources will stop，cluster processes halt on Node ’B’，and the remaining cluster nodes take no action.
单选题Following a successful cluster fallover， clstat returns no status， the snmpinfo command hangs. All Cluster resources appear to be active. What should be done to resolve this problem？（）A Restart all cluster nodes.B Verify that cluster.es.client.rte is installed on all nodes.C Use chssys -a -d -p -s clcomdES to enable cluster communication.D Use the /usr/sbin/snmpv3_ssw-1 command to revert SNMP from version 3 to version 1.
单选题Node ’C’ has just completed reintegration in a three-node cluster. The hacmp.out logifle displays The event node_up_complete for Node ’C’. The cluster administrator wishes to verify that the cluster is stable. In addition to reviewing the cluster log files，what utility should be run to verify the cluster state？（）A clstatB clinfoC cldiagD clverify
单选题Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’ is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elements for the resource group have been acquired. The administrator who is conducting the HACMP test starts the HACMP daemons on Node ’B’ with the ’smitty clstart" command. The administrator notices that Node ’B’ acquires the elements of the resource group， including a service IP labels，a shared volume group， and an application server that has been started. The expectation was that Node ’B’ would enter the cluster in a standby status， rather than acquiring production resources. What should the administrator do to correct this problem？（）A Change the cluster to a rotating design.B Change the Cascading without Fallback flag to true.C Change the Inactive Takeover field to false in the cluster configuration.D Nothing should be done. This is the default behavior for cascading resource groups，and node ’A’ should have been started first.
单选题A cluster script failed because it was unable to set the hostname， and the Cluster Manager reported the event failure. What must be done prior to sue the "HACMP Problem Determination Tools" - "Recover From Script Failure" to have the Cluster Manager resume cluster processing？（）A Nothing， the Recover From Script Failure will correct the issue.B Disable and re-enable the effected Ethernet adapter by using ifconfig.C Correct the error by setting the hostname on the effected node from the command line.D Verify that the clinfo daemon is running prior to executing the recover from scriptfailure.
单选题Which of the following commands will display a snapshot of cluster status， including details of current networkstatus and resource group fallover/fallback policies？（）AcldumpBcllssvcsCclshowresDclstat -o
单选题Company.com performs cluster verification every Sunday night with a corn job. The systems administrator reviews the /var/hacmp/clverify/clverify.log on Monday morning and notice that cluster verification posted a message about inconsistent filesystem names in one of the shared volume groups. What should the administrator do？（）A Cause a fallover to occur on the resource group.B Export the volume groups and re-import them on all nodes.C Run an importvg -L command on all the nodes in the cluster.D Investiage recent changes to the shared volume group and use C-SPOC to correct inconsistencies.
单选题The snmpinfo command can be sued to obtain information about the current state of a running cluster. Which of the following will provide an administrator with a complete list of information from the cluster MIB？（）A snmpinfo -m get -o /usr/es/sbin/cluster/hacmp.defs -v clusterB snmpinfo -m dump -o /usr/es/sbin/cluster/hacmp.defs -v clusterC snmpinfo -m get -o /usr/es/sbin/cluser/hacmp.defs -v clusterState.0D snmpinfo -m dump -o /usr/es/sbin/cluster/hacmp.defs -v clusterState.0