单选题You configure a W2kPro with static IP. You found an error in DNS server address. You configure DNS address to 10.1.1.5. But the W2kPro is still unable to connect to the network resource by name. You run ipconfig /all and see that DNS server address is：0.0.0.0 What do you do？ （）AStop and Restart DNS client service.BAdd 10.1.1.5 to DNS server list on TCP/IP advanced properties tab. CAdd A （host） record for the computer to the DNS server zone file. DConfigure DHCP server to have a DNS server address of 10.1.1.5
单选题
You configure a W2kPro with static IP. You found an error in DNS server address. You configure DNS address to 10.1.1.5. But the W2kPro is still unable to connect to the network resource by name. You run ipconfig /all and see that DNS server address is：0.0.0.0 What do you do？ （）
A
Stop and Restart DNS client service.
B
Add 10.1.1.5 to DNS server list on TCP/IP advanced properties tab.
C
Add A （host） record for the computer to the DNS server zone file.
D
Configure DHCP server to have a DNS server address of 10.1.1.5
参考解析
解析：
暂无解析
相关考题：
you configure a new file server that runs windows server 2008. Users access shared files on the file server. Users report that they are unable to access the shared files.The TCP/IP properties for the file server are configured as shown in the following exhibit.You need to ensure that users are able to access the shared files. What should you do?（）A.Configure a static IP address.B.Configure the default gateway.C.Configure the DNS server address.D.Add the domain to the DNS suffix on the network interface.
How do you send static routes to a RIP neighbor?() A.By default, RIP automatically sends static routes.B.Configure the static route with a next hop of the RIP neighbor.C.Configure redistribute static under [edit protocols rip].D.Apply an export policy within RIP that matches on the routes, and accepts it.
When you use Microsoft Windows Media Player to begin playback of a music file, you receive the following error message: You do not have the rights to play this file.” You need to configure Windows Media Player to ensure playback of protected digital media.What should you do?（）A.AB.BC.CD.D
You are the network administrator for The network consists of a single Active Directory domain named.You configure a new Windows Server 2003 file server named TestKingSrv1.You restore user files from a tape backup, and you create a logon script that maps driveletters to shared files on TestKingSrv1.Users report that they cannot access TestKingSrv1 through the drive mappings youcreated. Users also report that TestKingSrv1 does not appear in My NetworkPlaces.You log on to TestKingSrv1 and confirm that the files are present and that theNTFS permissions and share permissions are correct. You cannot access anynetwork resources. You run the ipconfig command and see the following output.You need to configure the TCP/IP properties on TestKingSrv1 to resolve theproblem.What should you do?（）A. Add testking.com to the DNS suffix for this connection field.B. Configure the default gateway.C. Configure the DNS server address.D. Configure a static IP address.
You are designing a Windows Azure web application that includes many static content files. The application will be accessed from locations all over the world by using a custom domain. You need to recommend an approach for providing access to the static content with the lowest possible latency. Which two actions should you recommend？（）A、 Place the static content in Windows Azure Blob storage.B、 Place the static content in Windows Azure Table storage.C、 Configure a custom domain that is an alias for the Windows Azure Storage domain.D、 Configure a custom domain that is an alias for the Windows Azure Content Delivery Network（CDN） domain.
You are preparing to install an operating system on virtual machines （VMs） in a Hyper-V environment. You need to configure each VM so that you can perform a network-based operating system installation. What should you do for each VM？（）A、Add a Network Adapter.B、Add a Legacy Network Adapter.C、Configure a static MAC address.D、Configure a dynamic MAC address.
Which two statements are true about the relationship between static NAT and proxy ARP? （）(Choose two.)A、It is necessary to forward ARP requests to remote hosts.B、It is necessary when translated traffic belongs to the same subnet as the ingress interface.C、It is not automatic and you must configure it.D、It is enabled by default and you do not need to configure it.
You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0 You need to ensure that the computer can connect to network resources by name. What should you do?（）A、Stop and restart the DNS Client service.B、Add 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.C、Add an A （host） record for the computer to the DNS server’s zone file.D、Configure your DHCP server to have a DNS server address of 10.1.1.5.
You started a long transaction. Before committing， you executed a query on one of the tables currently being modified. You received the following error： ORA-01555： snapshot too old How would you prevent such an error in the future？（）A、guarantee undo retentionB、add one more redo log groupC、size the redo log files appropriatelyD、size the UNDO tablespace appropriatelyE、size the SYSTEM tablespace appropriatelyF、configure an appropriate undo retention intervalG、change automatic undo management to manual
How do you send static routes to a RIP neighbor?（）A、By default, RIP automatically sends static routes.B、Configure the static route with a next hop of the RIP neighbor.C、Configure redistribute static under [edit protocols rip].D、Apply an export policy within RIP that matches on the routes, and accepts it.
You work as a database administrator for Supportcenter.cn. When you tried to connect to the database， you received the following error： ERROR： ORA-12541：TNS：no_listener You found that the listener is not running on the server， so you issued the following command in the Listener Control utility to start the listener. lsnrctlSTART What statement is true？（）A、It would attempt to start the default listenerB、It would start the most recently created listener.C、It would display an error with a message asking for the listener name to be specified.D、It would show you a list of listeners and prompts for the listener name that you want to start.
you configure a new file server that runs windows server 2008. Users access shared files on the file server. Users report that they are unable to access the shared files.The TCP/IP properties for the file server are configured as shown in the following exhibit.You need to ensure that users are able to access the shared files. What should you do?（）A、Configure a static IP address.B、Configure the default gateway.C、Configure the DNS server address.D、Add the domain to the DNS suffix on the network interface.
You are the administrator of ExamSheet.net's network. You attempt to install a video driver on a Windows 2000 Professional computer. You receive the following error message: "Error 11 - Cannot install video driver." The driver was originally downloaded from the video card manufacturer's Web site. You have successfully used the driver in the past on other Windows 2000 Professional computers. You want to configure the Windows 2000 Professional computer to check for driver integrity and to allow you to install this video driver. What should you do? （）A、Use the Hardware troubleshooter. Configure the computer to prevent the installation of unsigned drivers. B、Use the Add Hardware wizard to install the driver. Create a Local Computer Policy to enable Windows File ProtectionC、Configure driver signing to ignore File Signature Verification. Create a Local Computer Policy to enable Windows File ProtectionD、Configure theUnsigned driver installation behaviorpolicy setting to beWarn but allow installation
You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server connects to the Internet by using a router.You attempt to launch Windows Update and receive the following error message: “Cannot find server or DNS Error.”The IP configurations of the server are shown in the exhibit. (Click the Exhibit button.)ou need to ensure that the server can connect to Windows Update. What should you do?（）A、Configure the server to have static IP settings. B、Install the DNS Server service on Server1 and configure DNS to use a forwarder. C、Add an entry to the %systemroot%/system32/drivers/etc/hosts file for update.microsoft.com. D、Add an entry to the %systemroot%/system32/drivers/etc/lmhosts file for update.microsoft.com.
You are the administrator of your company’s network. You attempt to install a printer driver on a Windows 2000 computer for a user named Linda. You receive the following error message： "Error 11-Cannot install printer driver." The driver was originally downloaded from the printer manufacturer’s Web site. You have successfully used the driver in the past on their Windows 2000 Professional computers. You want to configure Linda’s computer to check for driver integrity and to allow you to install this printer driver. What should you do？ （）A、Configure driver signing to display a message before installing an unsigned driver.B、Configure driver signing to ignore File Signature Verification.C、Create a Local Computer Policy to enable Windows File Protection.D、Use the Add Printer Driver wizard to install the driver.Create a Local Computer Policy to enable Windows File Protection.E、Use the Print Troubleshooter.F、Configure the computer to prevent the installation of unsigned drivers.
You are the administrator of ExamSheet.net's network. ExamSheet upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings so that IP and DNS addresses are obtained automatically. When you restart the computer you cannot access the network. When you attempt toPINGaddress 127.0.0.1 you receive the following error message: "Request timed out." You want this computer to communicate on the network. What should you do?（）A、Configure IP address settings manually.B、Replace the network adapter.C、Disable TCP/IP filtering for all network adapters.D、Configure DNS server address settings manually.E、Enable IEEE 802.1x authentication.
You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）A、Enable DHCP in the TCP/IP properties.B、Replace the Token Ring network adapter with an Ethernet network adapter.C、Configure a different TCP/IP address on the same subnet.D、Configure a valid DNS Server in the TCP/IP properties.
You want to configure your Windows 2000 Professional computer to remotely access your company's Windows 2000 Routing and Remote Access server. You configure a VPN connection. For security purposes, you configure the VPN connection to use MS-CHAP v2 only and to require encryption. You also configure TCP/IP to obtain an IP address automatically, to enable IPSec, and to set IPSec to Secure Server. When you try to connect, you receive the following error message, "The encryption attempt failed because no valid certificate was found." What should you do to connect to the server? （）A、Enable the VPN connection to use MS-CHAP.B、Change the data encryption setting toOptional Encryption.C、Specify a TCP/IP address in theNetworkproperties.D、Change the IPSec policy setting toClient.
You have 15 computers that run Windows 7. You need to implement a monitoring solution that meets thefollowing requirements. Sends an e-mail notification when an application error is logged in the event log Runs a script to restart the computer if an application error occurs between 17:00 and 07:00 Minimizes the administrative effort required to monitor applications. What should you do?（）A、On all the computers， configure a custom view. Configure a custom task for the application error events.B、On a computer， configure a custom view to display the application errors. Configure a custom task forthe application error events.C、On a central computer， configure an event subscription. On all of the computers， configure a customtask in the Forwarded Events log.D、On all the computers， configure an event subscription to a central computer. On the central computer，configure a custom task in the Forwarded Events log.
You configure a W2kPro with static IP. You found an error in DNS server address. You configure DNS address to 10.1.1.5. But the W2kPro is still unable to connect to the network resource by name. You run ipconfig /all and see that DNS server address is：0.0.0.0 What do you do？ （）A、Stop and Restart DNS client service.B、Add 10.1.1.5 to DNS server list on TCP/IP advanced properties tab. C、Add A （host） record for the computer to the DNS server zone file. D、Configure DHCP server to have a DNS server address of 10.1.1.5
You are planning the migration of an existing application to Windows Azure. The application includes a trace listener that produces log files. The log files must be transferred to the Windows Azure Storage service each day with the minimum amount of effort. You need to recommend an approach for transferring the log files. What should you recommend？（）A、 Perform on-demand transfers of custom error logs.B、 Perform on-demand transfers of Windows Azure logs.C、 Configure scheduled transfers of custom error logs.D、 Configure scheduled transfers of Windows event logs.
Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）A、Configure a different TCP/IP addressB、Enable DHCP in the TCP/IP propertiesC、Enable DNS in the TCP/IP propertiesD、Configure the network adapter to run at 100 Mbps onlyE、Replace the network adapter.
You configure a new file server that runs Windows Server 2008. Users access shared files on the file server. Users report that they are unable to access the shared files. The TCP/IP properties for the file server are configured as shown in the following exhibit.（exhibit not there again wtf!） You need to ensure that users are able to access the shared files. How should you configure the TCP/IP properties in the file server？（）A、Configure a static IP addressB、Configure the default gatewayC、Configure the DNS server addressD、Add the domain to the DNS suffix on the network interface
You are the newly appointed administrator at Certkiller.com. You are in the process of creating anASP.NET application using Microsoft .NET Framework v3.5. During routine monitoring you discover that a JavaScript code fragment in the AJAX application isnot exhibiting the desired behavior. You notice an error icon in the status bar of Microsoft InternetExplorer but is does not prompt you to debug the script. You need to determine the appropriateaction you should take in order to configure Internet Explorer to prompt you to debug the script. What should you do？（）A、You should consider clearing the Disable Script Debugging (Other) check box.B、You should consider selecting the Display a notification regarding every script error check box.C、You should consider selecting the Enable third-party browser extensions check box.D、You should consider clearing the Disable Script Debugging (Internet Explorer) check box.E、You should consider selecting the Show friendly HTTP error messages check box.
单选题You work as a database administrator for Certkiller .com. When you tried to connect to the database， you received the following error： ERROR： ORA-12541：TNS：no_listener You found that the listener is not running on the server， so you issued the following command in the Listener Control utility to start the listener. lsnrctlSTART What statement is true？（）AIt would attempt to start the default listenerBIt would start the most recently created listener.CIt would display an error with a message asking for the listener name to be specified.DIt would show you a list of listeners and prompts for the listener name that you want to start.
单选题You are the desktop administrator for your company. All client computers run Windows XP Professional. Currently, 10 of the computers in the graphics department contain two processors. You want to install a second processor in each of the remaining computers in the graphics department. You install a second processor in a test computer. When you start the computer, the start process begins normally and then terminates. You receive the following error message: "STOP: 0x00000079 HAL_MISMATCH." When you restart the computer, it stops again, and you receive the same error message. You remove the second processor, and the computer starts normally. When you attempt to install a second processor in a different test computer, the same STOP error occurs. You need to eliminate the error so that you can install the second processor on all of the computers. What should you do?（）ABefore you install the second processor, install the multiprocessor HAL on each computer. BBefore you install the second processor, configure the each computer's system BIOS for multiprocessor APM.CAfter you install the second processor, restart each computer by using the Recovery console, and copy the multiprocessor HAL files from the Windows XP Professional CD-ROM. DAfter you install the second processor, start each computer in safe mode. Configure the SSDP Discovery Service startup parameter to Manual.
单选题You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0 You need to ensure that the computer can connect to network resources by name. What should you do?（）AStop and restart the DNS Client service.BAdd 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.CAdd an A （host） record for the computer to the DNS server’s zone file.DConfigure your DHCP server to have a DNS server address of 10.1.1.5.