单选题Given the following configuration， what command can be used to determine the physical path that traffic will be sent out upon？（） Port-profile type Ethernet name vm-data Switchport mode trunk Switchport trunk allowed vlan 200-210 Channel-group auto mode on mac-pinning State enabled Vmware port-group No shut Port-profile type vethernet name vlan-200 Switchport mode access Switchport vlan 200 State enabled Vmware port-group No shutA module vem X execute vemcmd show trunkB show module 3 internal pinningC module vem X execute vemcmd show portD show module vem mappingE show interface vethX pinning
单选题
Given the following configuration， what command can be used to determine the physical path that traffic will be sent out upon？（） Port-profile type Ethernet name vm-data Switchport mode trunk Switchport trunk allowed vlan 200-210 Channel-group auto mode on mac-pinning State enabled Vmware port-group No shut Port-profile type vethernet name vlan-200 Switchport mode access Switchport vlan 200 State enabled Vmware port-group No shut
A
module vem X execute vemcmd show trunk
B
show module 3 internal pinning
C
module vem X execute vemcmd show port
D
show module vem mapping
E
show interface vethX pinning
参考解析
解析：
暂无解析
相关考题：
You are a senior network administrator at Ezonexam, and while performing the password recovery procedure on your 2500 series Cisco router, you type in the following command:o/r 0x2142What is the purpose of this command?A．It is used to restart the router.B．It is used to bypass the configuration in NVRAM.C．It is used to enter ROM Monitor mode.D．It is used to view the lost password.E．It is used to save the changes to the configuration.
Which of the following command line tools can be used to display the default gateway, IP address,and DNS servers currently being used by a host?() A.TRACERTB.IPCONFIG/ALLC.NSLOOKUPD.PING-T
The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?() A. The default administrative distance is used.B. The command is used to establish a static route.C. The command is used to configure the router interfaces.D. The command is used to establish a stub network.E. The subnet mask for the source address is 255.255.255.0
The following configuration command was issued on router TK1:ip route 172.16.3.0 255.255.255.0 192.168.2.1.Which of the following statements are true regarding this command?（）A、The command is used to establish a static route.B、The default administrative distance is used.C、The command is used to configure the default route.D、The subnet mask for the source address is 255.255.255.0E、The command is used to establish a stub network
You are a senior network administrator at TestKing, and while performing thepassword recovery procedure on your 2500 series Cisco router, you type in thefollowing command:o/r 0x2142What is the purpose of this command?（）A、It is used to restart the router.B、It is used to bypass the configuration in NVRAM.C、It is used to enter ROM Monitor mode.D、It is used to view the lost password.E、It is used to save the changes to the configuration.
What is the use of an "all configuration" backup in Cisco UCS？（）A、 Can be used to migrate from a 6120 to a 6140 and retain the same service profilesB、 Can only be used on the fabric interconnect on which it was createdC、 Can be used to migrate from a 6120 to 6140 and retain system IP addresses and cluster informationD、 Can be used to match firmware versions between 6120 and 6140 during a migration
Which of the following products and utilities can be used to update all encrypted data as well as the merchant key in a WebSphere Commerce database for a given instance？（）A、The Database Update Tool found in Configuration ManagerB、The LDAP ServerC、The WebSphere Application Server Administrative ConsoleD、The WebSphere Commerce SecurityUpdate CommandE、The WebSphere Commerce Administration Console
What can be used to stop or start the WebSphere Commerce server？（）A、Command LineB、WebSphere Commerce Configuration ManagerC、WebSphere Commerce Administration ConsoleD、WebSphere Commerce Accelerator
What does it mean for a variable in the Application Editor to be defined as a parameter?（）A、The variable can be used to pass data to and from subflows. B、The value for that variable can be supplied via Application Configuration in Application Administration. C、The value for that variable is defined by the calling application. D、The variable can be used in conditional steps. E、The variable can be used to pass data to and from VoiceXML applications.
In the Cisco IOS, what is the definition of a global command?（）A、A command that can be entered in any configuration mode.B、A command that supports all protocols.C、A command that is implemented in all IOS versions.D、A command that is set once and affects the entire router.E、A command that is available in every release of IOS.
The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）A、The default administrative distance is used.B、The command is used to establish a static route.C、The command is used to configure the router interfaces.D、The command is used to establish a stub network.E、The subnet mask for the source address is 255.255.255.0
What is a global command?（）A、a command that is set once and affects the entire routerB、a command that is implemented in all foreign and domestic IOS versionsC、a command that is universal in application and supports all protocolsD、a command that is available in every release of IOS, regardless of the version or deployment statusE、a command that can be entered in any configuration mode
Which of the following command line tools can be used to display the default gateway, IP address,and DNS servers currently being used by a host?（）A、TRACERTB、IPCONFIG/ALLC、NSLOOKUPD、PING-T
The sysdumpdev command can be used to configure remote dump devices. Which of the following conditions is NOT used for a remote dump device configuration?（）A、The local and the remote host must have Transmission Control Protocol/Internet Protocol (TCP/IP) installed and configured. B、The remote host must support NFS. C、The remote host must have an NFS exported directory defined such that the local host has read and write permissions to the dump file on the remote host. D、The remote host can be the same as the local host.
Which of the following can be used to re-deploy a system configuration in a disaster recovery scenario?（）A、System planB、System profileC、Critical console dataD、VIO server partition profile
What current IBM resource can be used for simple-to-complex configurations and can be exported in different formats for the pricing of System x， BladeCenter and System x storage products？（）A、System x Sales Configuration Aid （xSCA）B、Standalone Solutions Configuration Tool （SSCT） C、Configuration Options Guide - （COG）D、ServerProven
Which of the following tools can be used to schedule a backup operation that is to be run every Sunday evening?（）A、JournalB、Task CenterC、Activity MonitorD、Command Line Processor
A system administrator has been asked to document the hardware configuration of a system. Which command can be used to assist in this task？（）A、lscfgB、mkdevC、lslppD、cfgmgr
Given the following MPLS L2 configuration command: mpls-relay 10.1.1.1 4 Which two statements true? （）(Choose two.)A、This command is applied to the core router facing interface.B、This command is applied to the customer facing interface.C、The 4 is locally significant and identifies the layer 2 circuit.D、The 4 must match exactly on the peer router configuration on the remote end.
单选题You are a senior network administrator at TestKing, and while performing thepassword recovery procedure on your 2500 series Cisco router, you type in thefollowing command:o/r 0x2142What is the purpose of this command?（）AIt is used to restart the router.BIt is used to bypass the configuration in NVRAM.CIt is used to enter ROM Monitor mode.DIt is used to view the lost password.EIt is used to save the changes to the configuration.
多选题Which two commands can be used to verify a trunk link configuration status on a given cisco switch?（）Ashow interfaces interfaceBshow interfaces trunkCshow interfaces switchportDshow ip interface briefEshow interfaces vlan
多选题The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）AThe default administrative distance is used.BThe command is used to establish a static route.CThe command is used to configure the router interfaces.DThe command is used to establish a stub network.EThe subnet mask for the source address is 255.255.255.0
单选题What is the use of an "all configuration" backup in Cisco UCS？（）A Can be used to migrate from a 6120 to a 6140 and retain the same service profilesB Can only be used on the fabric interconnect on which it was createdC Can be used to migrate from a 6120 to 6140 and retain system IP addresses and cluster informationD Can be used to match firmware versions between 6120 and 6140 during a migration
单选题An administrator needs to update a router configuration for a router that does not support SSH.Which of the following can be used to securely update the router configuration?（）AFTPBSNMPv2CTFTPDKTTPS
单选题What can be used to stop or start the WebSphere Commerce server？（）ACommand LineBWebSphere Commerce Configuration ManagerCWebSphere Commerce Administration ConsoleDWebSphere Commerce Accelerator
单选题What type of constraint can be used to ensure that, in any given row in a table, the value of one column never exceeds the value of another column?（）ACheckBRangeCReferentialDInformational
多选题The following configuration command was issued on router TK1:ip route 172.16.3.0 255.255.255.0 192.168.2.1.Which of the following statements are true regarding this command?（）AThe command is used to establish a static route.BThe default administrative distance is used.CThe command is used to configure the default route.DThe subnet mask for the source address is 255.255.255.0EThe command is used to establish a stub network
单选题Which of the following products and utilities can be used to update all encrypted data as well as the merchant key in a WebSphere Commerce database for a given instance？（）AThe Database Update Tool found in Configuration ManagerBThe LDAP ServerCThe WebSphere Application Server Administrative ConsoleDThe WebSphere Commerce SecurityUpdate CommandEThe WebSphere Commerce Administration Console