单选题A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）AHave the client purchase a SATA compatible system board.BHave the client purchase a SATA to IDE conversion kit.CHave the client return the drive and purchase an IDE compatible drive.DHave the client purchase a SCSI to SATA conversion kit.
单选题
A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）
A
Have the client purchase a SATA compatible system board.
B
Have the client purchase a SATA to IDE conversion kit.
C
Have the client return the drive and purchase an IDE compatible drive.
D
Have the client purchase a SCSI to SATA conversion kit.
参考解析
解析：
暂无解析
相关考题：
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started.Which of the following Windows utilities would help configure the new hard disk?（）A. Disk ManagementB. Services and ApplicationsC. Removable StorageD. Device Manager
Which of the following internal storage media types has the GREATEST storage capacity?() A. Compact flash driveB. SATA hard driveC. Blu-Ray driveD. SDLT Tape drive
A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）A、Use a jumper from the motherboard where the new drive is going to be installed.B、Use a jumper from a hard drive that is no longer functioning.C、Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.D、The new hard drive must be replaced
After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）A、Install a larger fan near the hard drive to cool the system.B、Clean the drive with compressed air and continue to use it.C、Remove and replace the drive.D、Apply more thermal compound and reseat the drive.
The security team has implemented new guidelines on how to handle sensitive information storedon workstations based on a past incident involving information found on donated workstations.Which of the following should be completed by technicians before donating the workstations?（）A、Install a new operating systemB、Delete users’ data before donationC、Write the drive with 1’s and 0’s three timesD、Delete all partitions of the hard drive
A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer. Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）A、Add another hard drive and use that available space.B、Run FDISK.C、Use the Disk Management tool.D、Back up all important data to an external drive then reformat the hard drive.
A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would MOST likely be the cause？（）A、The motherboard was damaged and needs replacing.B、The floppy drive was not reconnected.C、A configuration disk was left in the floppy drive.D、The ribbon cable has been installed incorrectly.
Two new servers are purchased and need to be installed to allow sharing of a single external hard drive enclosure. One server is configured as a local file server， and the other as a database server for a different network. The onsite technician notices that when both servers are running at the same time， they each receive SCSI errors. When they are running individually， no errors are reported. Which of the following is the BEST source of information to use for troubleshooting this problem？（）A、 the server vendor’s FAQ websiteB、 the SCSI controller vendor’s user manualC、 the drive enclosure vendor’s user manualD、 the network operating system vendor’s website
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）A、Disk ManagementB、Services and ApplicationsC、Removable StorageD、Device Manager
An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance. The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）A、Move the page file to the new drive.B、Copy the system32 directory to the new drive.C、Convert the C drive to a basic disk.D、Setup a software RAID to mirror the C drive.
Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）A、The new drive’s jumper is set for master.B、The new drive is connected to the secondary bus as a slave drive.C、Both drives’ jumpers are set for cable select.D、The old drive’s jumper is set for master and the new drive is set for slave.
Which of the following MOST correctly describes a hot spare？（）A、A drive assigned to an array that will only hold parity information used for rebuilding a failedarray drive.B、An external hard drive to which all data is replicated to for recovery in the event of a failure.C、A drive assigned to an array that will automatically be used to rebuild a failed array drive.D、An extra drive purchased and stored in the parts cabinet to replace failed drives.
The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.
An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）A、The BIOS is set with the wrong boot order.B、The jumpers have not been set on the hard drive.C、The hard drive is not compatible with the system board.D、The boot.ini file needs to be modified.
Which of the following internal storage media types has the GREATEST storage capacity?（）A、Compact flash driveB、SATA hard driveC、Blu-Ray driveD、SDLT Tape drive
A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）A、Windows cannot be booted from a controller card.B、The hard drive must have Windows reinstalled because a new controller card was installed.C、The SATA controller card was not set as a boot device in the computer BIOS.D、The new controller must have the correct jumper settings for Windows mode.
单选题Which of the following MOST correctly describes a hot spare？（）AA drive assigned to an array that will only hold parity information used for rebuilding a failedarray drive.BAn external hard drive to which all data is replicated to for recovery in the event of a failure.CA drive assigned to an array that will automatically be used to rebuild a failed array drive.DAn extra drive purchased and stored in the parts cabinet to replace failed drives.
单选题Which of the following internal storage media types has the GREATEST storage capacity？（）A Compact flash driveB SATA hard driveC Blu-Ray driveD SDLT Tape drive
单选题You have a computer that runs Windows 7. You add a new hard disk drive to the computer and create anew NTFS partition. You need to ensure that you can use the Previous Versions feature on the new drive. What should you do?（）AFrom Disk Management, convert the new disk to a dynamic disk.BFrom System Properties, configure the System Protection settings.CFrom System and Security, enable BitLocker Drive Encryption (BitLocker).DFrom the properties of the new drive, create a share and modify the caching settings.
单选题Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）AThe new drive’s jumper is set for master.BThe new drive is connected to the secondary bus as a slave drive.CBoth drives’ jumpers are set for cable select.DThe old drive’s jumper is set for master and the new drive is set for slave.
单选题Two new servers are purchased and need to be installed to allow sharing of a single external hard drive enclosure. One server is configured as a local file server， and the other as a database server for a different network. The onsite technician notices that when both servers are running at the same time， they each receive SCSI errors. When they are running individually， no errors are reported. Which of the following is the BEST source of information to use for troubleshooting this problem？（）A the server vendor’s FAQ websiteB the SCSI controller vendor’s user manualC the drive enclosure vendor’s user manualD the network operating system vendor’s website
单选题An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）AThe BIOS is set with the wrong boot order.BThe jumpers have not been set on the hard drive.CThe hard drive is not compatible with the system board.DThe boot.ini file needs to be modified.
单选题After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）AReplace the second drive with a hot swappable one.BSwap the drive boot order in the BIOSCMake the second disk active under the disk management tool.DRebuild the array using the hardware RAID tool at boot.
单选题The customer brings their mini-tower and a new DVD/RW drive they want installed. The technician finds a second hard drive in an empty 5.25 bay connected to the secondary bus and jumpered as a slave. The ribbon cable will not stretch from the primary hard drive to the open 5.25 inch bay. Which of the following is the BEST solution?（）AConnect the new DVD drive as the primary on the secondary bus and leave the old CD drive disconnected.BMove the secondary hard drive next to the primary hard drive and connect to the primary bus. Connect the new DVD drive as the slave on the secondary bus.CMove the secondary hard drive from the secondary to the primary bus and then reformat the hard drive after rebooting then reassign the drive letters in disk management prior to installing the new DVD drive on the secondary bus.DMove the secondary hard drive to the bay and then connect it to the primary bus. Connect themini-tower and the new DVD drive as the master on the secondary bus.
单选题A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）AUse a jumper from the motherboard where the new drive is going to be installed.BUse a jumper from a hard drive that is no longer functioning.CContact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.DThe new hard drive must be replaced
单选题An internal user has deleted a file named， pagefile.sys and is concerned this deletion may affect the computer. The user should be instructed to：（）Areboot the computer because Windows automatically generates a new page file.Badd a new hard drive， format the drive and install Windows.Cback up all data， reboot the computer and notify a desktop technician.Dreformat the hard drive and reinstall Windows.
单选题You have a computer that runs Windows 7. You install a second internal hard disk drive in the computer.You attempt to create a system image and discover that the new disk is not listed as a backup destination.You need to ensure that you can use the new disk as a backup destination for system images. What should you do?（）ACreate a NTFS partition.BCreate a mirrored volume.CCreate a system repair disc.DLog on to the computer by using a different account.
单选题A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）AHave the client purchase a SATA compatible system board.BHave the client purchase a SATA to IDE conversion kit.CHave the client return the drive and purchase an IDE compatible drive.DHave the client purchase a SCSI to SATA conversion kit.