单选题A user reports that their UPS is making a loud beeping sound. Which of the following would cause this problem?（）AThe UPS is overcharged.BIncorrect wattage on the power supply.CThe UPS battery is not charged.DThe UPS is in power management mode.
单选题
A user reports that their UPS is making a loud beeping sound. Which of the following would cause this problem?（）
A
The UPS is overcharged.
B
Incorrect wattage on the power supply.
C
The UPS battery is not charged.
D
The UPS is in power management mode.
参考解析
解析：
暂无解析
相关考题：
Which of the following should be kept in uninterruptible power supply (UPS) documentation records?() A. Antivirus software versionB. Battery replacement dateC. Wire shelving diagramD. IP address for network printerE. Shutdown delay timing
Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply (UPS)?() A. There is a fire hazard potential if a power outage occurs.B. The last system plugged into the UPS will not be provided any power.C. The UPS will draw more power from the circuit to compensate.D. The runtime of the UPS will be insufficient if a power outage occurs.
An administrator has a malfunctioning uninterruptible power supply (UPS). Which of the following is the MOST likely cause of the problem?() A. Battery needs to be replacedB. Light switch is turned offC. Smart cable is disconnectedD. UPS needs a firmware update
A datacenter has exceeded the load on the central uninterruptible power supply (UPS) for the room and is causing power load problems. Additional power is available, but not using the central UPS. Which of the following is the BEST temporary solution for adding new servers until an upgrade of the central UPS can occur?（）A、Continue plugging into the central UPS, but put the UPS on bypass to avoid load problems.B、Plug the servers directly into the power that is not on the UPS.C、Add stand alone UPSs for new servers not wired off the central UPS.D、Continue plugging into the central UPS because the actual load supported is actually higher than stated
The user turns on the computer and hears a popping sound and detects a burning smell. Thesystem will not power on. Which of the following is the MOST likely problem?（）A、Power supply has blown.B、CPU fan is faulty.C、Motherboard has overheated and shutdown.D、UPS has been tripped.
An administrator is working on a rack mount server with all newly installed equipment. Theuninterruptible power supply （UPS） in the rack starts beeping loudly. Which of the following is the FIRST troubleshooting step that should be taken？（）A、Ensure that the power cable for the UPS is plugged in.B、Ensure the battery in the UPS is still good.C、Check the smart cable connecting the UPS to the server.D、Reset the UPS to determine if the problem persists.
A user reports that their UPS is making a loud beeping sound. Which of the following would cause this problem?（）A、The UPS is overcharged.B、Incorrect wattage on the power supply.C、The UPS battery is not charged.D、The UPS is in power management mode.
Which of the following should be kept in uninterruptible power supply （UPS） documentation records？（）A、 Antivirus software versionB、 Battery replacement dateC、 Wire shelving diagramD、 IP address for network printerE、 Shutdown delay timing
A Windows server has rebooted by itself several times.There are several functioning non-Windows servers in the same rack that are connected to the same uninterruptible power supply（UPS）.Which of the following is the MOST likely cause of the reboots？（）A、The UPS is malfunctioning.B、The user traffic to the server is too high.C、A BSOD is occurring.D、The non-Windows servers cannot be located on the same UPS as the Windows server.
Which of the following is MOST useful in HVAC planning？ （）A、 Uninterruptible Power Supply （UPS） loadB、 HumidityC、 AmperageD、 VoltageE、 Temperature
A technician has found that the uninterruptible power supply (UPS) connected to a server does not have sufficient battery power to allow the server to shutdown gracefully. Which of the following is the MOST cost effective way to allow this server to shutdown gracefully?（）A、Install a second UPS.B、Increase the size of the swapfile.C、Increase the size of the pagefile.D、Install an extended battery pack into the UPS
An administrator has a malfunctioning uninterruptible power supply (UPS). Which of the following is the MOST likely cause of the problem?（）A、Battery needs to be replacedB、Light switch is turned offC、Smart cable is disconnectedD、UPS needs a firmware update
Which of the following types of UPS would be used with equipment that is very sensitive to power fluctuations？（）A、Offline/StandbyB、Line interactiveC、RackmountD、Online/Double Conversion
Which of the following factors is the MOST important to consider when choosing an uninterruptible power supply （UPS） for a single server？ （）A、 UPS form factorB、 Server form factorC、 Server power supplys wattage ratingD、 Desired runtime
A datacenter has exceeded the load on the central uninterruptible power supply （UPS） for the roomand is causing power load problems. Additional power is available， but not using the central UPS. Which of the following is the BEST temporary solution for adding new servers until an upgrade of the central UPS can occur？（）A、 Continue plugging into the central UPS， but put the UPS on bypass to avoid load problems.B、 Plug the servers directly into the power that is not on the UPS.C、 Add stand alone UPSs for new servers not wired off the central UPS.D、 Continue plugging into the central UPS because the actual load supported is actually higher than stated.
Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply （UPS）？（）A、 There is a fire hazard potential if a power outage occurs.B、 The last system plugged into the UPS will not be provided any power.C、 The UPS will draw more power from the circuit to compensate.D、 The runtime of the UPS will be insufficient if a power outage occurs.
单选题An administrator has a malfunctioning uninterruptible power supply (UPS). Which of the following is the MOST likely cause of the problem?（）ABattery needs to be replacedBLight switch is turned offCSmart cable is disconnectedDUPS needs a firmware update
单选题A datacenter has exceeded the load on the central uninterruptible power supply (UPS) for the room and is causing power load problems. Additional power is available, but not using the central UPS. Which of the following is the BEST temporary solution for adding new servers until an upgrade of the central UPS can occur?（）AContinue plugging into the central UPS, but put the UPS on bypass to avoid load problems.BPlug the servers directly into the power that is not on the UPS.CAdd stand alone UPSs for new servers not wired off the central UPS.DContinue plugging into the central UPS because the actual load supported is actually higher than stated
单选题An administrator is working on a rack mount server with all newly installed equipment. Theuninterruptible power supply （UPS） in the rack starts beeping loudly. Which of the following is the FIRST troubleshooting step that should be taken？（）AEnsure that the power cable for the UPS is plugged in.BEnsure the battery in the UPS is still good.CCheck the smart cable connecting the UPS to the server.DReset the UPS to determine if the problem persists.
多选题Which of the following is MOST useful in HVAC planning？ （）AUninterruptible Power Supply （UPS） loadBHumidityCAmperageDVoltageETemperature
单选题A technician has found that the uninterruptible power supply (UPS) connected to a server does not have sufficient battery power to allow the server to shutdown gracefully. Which of the following is the MOST cost effective way to allow this server to shutdown gracefully?（）AInstall a second UPS.BIncrease the size of the swapfile.CIncrease the size of the pagefile.DInstall an extended battery pack into the UPS
单选题A Windows server has rebooted by itself several times.There are several functioning non-Windows servers in the same rack that are connected to the same uninterruptible power supply（UPS）.Which of the following is the MOST likely cause of the reboots？（）AThe UPS is malfunctioning.BThe user traffic to the server is too high.CA BSOD is occurring.DThe non-Windows servers cannot be located on the same UPS as the Windows server.
单选题Which of the following types of UPS would be used with equipment that is very sensitive to power fluctuations？（）AOffline/StandbyBLine interactiveCRackmountDOnline/Double Conversion
单选题Which of the following factors is the MOST important to consider when choosing an uninterruptible power supply （UPS） for a single server？ （）A UPS form factorB Server form factorC Server power supplys wattage ratingD Desired runtime
单选题A datacenter has exceeded the load on the central uninterruptible power supply （UPS） for the roomand is causing power load problems. Additional power is available， but not using the central UPS. Which of the following is the BEST temporary solution for adding new servers until an upgrade of the central UPS can occur？（）A Continue plugging into the central UPS， but put the UPS on bypass to avoid load problems.B Plug the servers directly into the power that is not on the UPS.C Add stand alone UPSs for new servers not wired off the central UPS.D Continue plugging into the central UPS because the actual load supported is actually higher than stated.
单选题Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply (UPS)?（）AThere is a fire hazard potential if a power outage occurs.BThe last system plugged into the UPS will not be provided any power.CThe UPS will draw more power from the circuit to compensate.DThe runtime of the UPS will be insufficient if a power outage occurs.
单选题A user reports that their UPS is making a loud beeping sound. Which of the following would cause this problem?（）AThe UPS is overcharged.BIncorrect wattage on the power supply.CThe UPS battery is not charged.DThe UPS is in power management mode.
单选题An administrator has a malfunctioning uninterruptible power supply （UPS）. Which of the following is the MOST likely cause of the problem？（）A Battery needs to be replacedB Light switch is turned offC Smart cable is disconnectedD UPS needs a firmware update