多选题Youe just configured the network interface on You？e just configured the network interface on systemA and the following information is displayed pertaining to systemA’s network interface： You have been instructed to change the name of this system to systemB. Which four files need to be modified to change the name of this system from systemA to systemB？ （）A/etc/nodenameB/etc/hostname.rtls0C/etc/hostnameD/etc/inet/hostsE/etc/domainnameF/etc/inet/ipnodesG/etc/inetd.conf
多选题
Youe just configured the network interface on You？e just configured the network interface on systemA and the following information is displayed pertaining to systemA’s network interface： You have been instructed to change the name of this system to systemB. Which four files need to be modified to change the name of this system from systemA to systemB？ （）
A
/etc/nodename
B
/etc/hostname.rtls0
C
/etc/hostname
D
/etc/inet/hosts
E
/etc/domainname
F
/etc/inet/ipnodes
G
/etc/inetd.conf
参考解析
解析：
暂无解析
相关考题：
You have a firewall filter applied in an inbound direction on a customer interface. You would like this filter to protect your network from a spoofed denial of service attack. Which action should be configured to accomplish your goal?（）A. then rejectB. then discardC. then next filterD. then silent-drop
Refer to the exhibit. R1 and R2 have been configured to share routing information via EIGRP. What will be the result of the configuration section shown for R2? () A. Any routes learned by R2 from the interface tied to the 172.16.0.0 network will not be advertised to neighbors on the 192.168.2.0 network.B. Only routes learned by R2 from the interface tied to the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.C. Only the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.D. All networks, except the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network .
You have just configured a static default route on router TK1. What is the purpose of a default route?() A. It is a route to be used when the routing protocol fails.B. It is a route configured by an ISP that sends traffic into a corporate network.C. It is a route used when a packet is destined for a remote network that is not listed in the routing table.D. It is a route manually configured for a specific remote network for which a routing protocol is not configured.E. It is used to send traffic to a stub network.
You work as a network engineer at TestKing.com. TestKing users have noticed extremely slow network performance, intermittent connectivity, and connection loss. After entering the show interfaces command, you notice that the Ethernet interface is configured as 100 Mbps full-duplex and that there is evidence of late collisions. What could be the cause of this problem?（）A. duplex mismatchB. a routing loopC. trunking mode mismatchD. improperly configured root bridgeE. improperly configured static VLAN
You are implementing a new frame relay network to provide connectivity between you offices. To do this, you set up the frame relay network using point-to-point subinterfaces.Which of the following does NOT need to be configured?（）A. The Frame Relay encapsulation on the physical interface.B. The local DLCI on each subinterface.C. An IP address on the physical interface.D. The subinterface type as point-to-point.
A router receives information about network 192.168.10.0／24 from multiple sources.What will the router consider the most reliable information about the path to that network?() A.an OSPF update for network 192.168.0.0/16B.a static router to network 192.168.10.0/24C.a static router to network 192.168.10.0/24 with a local serial interface configured as the next hopD.a RIP update for network 192.168.10.0/24E.a directly connected interface with an address of 192.168.10.254/24F.a default route with a next hop address of 192.168.10.1
You have just created a new VLAN on your network for inter-VLAN routing. What is one step that you should include in your VLAN-based implementation and verification plan？（）A、Verify that different native VLANs exist between two switches for security purposes.B、Verify that the switch is configured to allow for trunking on the switch ports.C、Verify that each switch port has the proper IP address space assigned to it for the new VLAN. D、Verify that the VLAN virtual interface has been correctly created and enabled.
You work as a network engineer at TestKing.com. TestKing users have noticed extremely slow network performance, intermittent connectivity, and connection loss. After entering the show interfaces command, you notice that the Ethernet interface is configured as 100 Mbps full-duplex and that there is evidence of late collisions. What could be the cause of this problem?（）A、duplex mismatchB、a routing loopC、trunking mode mismatchD、improperly configured root bridgeE、improperly configured static VLAN
You are using IPv6， and would like to configure EIGRPv3. Which three of these correctly describe how you can perform this configuration？（）A、EIGRP for IPv6 is directly configured on the interfaces over which it runs.B、EIGRP for IPv6 is not configured on the interfaces over which it runs， but if a user uses passive-interface configuration， EIGRP for IPv6 needs to be configured on the interface that is made passive.C、There is a network statement configuration in EIGRP for IPv6， the same as for IPv4.D、There is no network statement configuration in EIGRP for IPv6.E、When a user uses a passive-interface configuration， EIGRP for IPv6 does not need to be configured on the interface that is made passive.F、When a user uses a non-passive-interface configuration， EIGRP for IPv6 does not need to be configured on the interface that is made passive
You are using AutoQoS Enterprise and realize that the results are not what you expected. Whichof the following are possible reasons for AutoQoS not functioning correctly？（Choose all thatapply.）（）A、The interface you configured for AutoQoS is set to half-duplexB、AutoQoS was configured on only one end of the linkC、The interface you configured for AutoQoS has no IP addressD、The interface’s bandwidth is not correctly configuredE、CEF is not enabled on the interfaceF、You enabled AutoQoS on the interface but forgot to enable globally first
Company.com wishes to use HACMP on two IBM eServer pSeries servers. During the planning session， it was decided to use the native serial ports s1 or s2 for a non-IP heartbeat network. What should be done to ensure the serial network will function with HACMP heartbeats？（） A、 Use either s1 or s2 port configured as a TTY interface with a NULL Modem cable.B、 Use the s2 serial port on each system configured as a TTY interface with a NULL modem cable.C、 Use the s1 port on each system configured as a TTY interface with a standard serial modemcable.D、 Verify with IBM support which native serial ports for the server model can be used for HACM pheartbeats.
You have a server named Server2 that runs Windows Server 2003 Service Pack 2 (SP2). The server has two network connections named Local Area Connection and Internet Connection.You configure network address translation (NAT) on Server2 as shown in the exhibit. (Click the Exhibit button.) You configure all client computers to use Server2 as their default gateway.Users report that they cannot connect to the Internet. You successfully connect to the Internet from Server2.You need to ensure that client computers can access Internet resources. What should you do?（）A、Change the Internet Connection interface type to Basic firewall only. B、Change the Internet Connection interface type to Private interface connected to private network. C、Add Local Area Connection as a new interface for the NAT protocol and set the interface as a Public interface connected to the Internet. D、Add Local Area Connection as a new interface for the NAT protocol and set the new interface as a Private interface connected to private network.
The Frame Relay network in the diagram is not functioning properly. What is the cause of the problem?（）A、The Gallant router has the wrong LMI type configuredB、Inverse ARP is providing the wrong PVC information to the Gallant routerC、The S3 interface of the Steele router has been configured with the frame-relay encapsulation ietf commandD、The frame-relay map statement in the Attalla router for the PVC to Steele is not correctE、The IP address on the serial interface of the Attalla router is configured incorrectly
A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?（）A、an OSPF update for network 192.168.0.0/16B、a static router to network 192.168.10.0/24C、a static router to network 192.168.10.0/24 with a local serial interface configured as the next hopD、a RIP update for network 192.168.10.0/24E、a directly connected interface with an address of 192.168.10.254/24F、a default route with a next hop address of 192.168.10.1
Company.com has I/O slot constraints on two nodes that are going to be configured in an HACMP cluster. There is room for only one Network Interface Card in each node，in addition to the built-in Ethernet port on the system planer. The best HACMP configuration for these servers is to implement：（） A、 A single adapter network using the Network Interface Card in each nodeB、 A single adapter network using persistent addresses on the Network Interface Card in each nodeC、 A dual adapter network using the internal Ethernet adapters as an non-service interface with IPAT via IP Replacement.D、 EtherChannel high availability for the network connections with HACMP cascading resource groups for data and application fallover
An AIX server has 2 network interfaces and the system administrator wants to enable the users on the locally configured network interface to be able to connect to systems configured on the global network interface. How is it accomplished？（）A、Enable routed on the serverB、Enable gated on the serverC、Enable ipforwarding on the serverD、Set network options back to default
You've configured an interface with an IP address and commited the change. You then commited a change that added an exception in a firewall filter to allow this network through the filter. You realize that this work was done on the wrong router. How do you undo all these changes?（）A、rollback 2B、rollback 1C、rollback 0D、rollback 3
You have a firewall filter applied in an inbound direction on a customer interface. You would like this filter to protect your network from a spoofed denial of service attack. Which action should be configured to accomplish your goal?（）A、then rejectB、then discardC、then next filterD、then silent-drop
You configured an interface with an IP address and committed the change. You then committed a change that added an exception in a firewall filter to allow this network through the filter. You realize that this work was done on the wrong router. How do you undo all these changes?（）A、rollback 2B、rollback 1C、rollback 0D、rollback 3
Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2. A DHCP server is deployed on the network and configured to provide IPv6 prefixes.You need to ensure that when you monitor network traffic,you see the interface identifiers derived from the Extended Unique Identifier (EUI)-64 address.Which command should you run?（）A、netsh.exe interface ipv6 set global addressmaskreply=disabledB、netsh.exe interface ipv6 set global dhcpmediasense=enabledC、netsh.exe interface ipv6 set global randomizeidentifiers=disabledD、netsh.exe interface ipv6 set privacy state=enabled
多选题You work as the IT professional in an international company which is named Wiikigo. You are experiencedin implementing and administering a network operating system. You are specialized in deploying servers，configuring Windows Server 2008 Terminal services and network application services， and configuring aweb services infrastructure. There is a server named S01 in your company. Windows Server 2008 andHyper-V are run by the server. Three virtual machines are hosted by the S01. According to the companypolicy， the company network should be unavailable to the virtual machines. Since you are the technicalsupport， you are required to have all of the virtual machines configured to connect to each other. And thecompany policy should be satisfied. Which actions should be performed to achieve the goal？（）ATo achieve the goal， the Connection should be set to Host for the network interface card.BTo achieve the goal， the Connection should be set to None for the network interface card.CTo achieve the goal， the Not connected option should be selected for each virtual machine.DTo achieve the goal， the Enable virtual LAN identification option should be enabled for each virtual machine.
多选题You are using IPv6， and would like to configure EIGRPv3. Which three of these correctly describe how you can perform this configuration？（）AEIGRP for IPv6 is directly configured on the interfaces over which it runs.BEIGRP for IPv6 is not configured on the interfaces over which it runs， but if a user uses passive-interface configuration， EIGRP for IPv6 needs to be configured on the interface that is made passive.CThere is a network statement configuration in EIGRP for IPv6， the same as for IPv4.DThere is no network statement configuration in EIGRP for IPv6.EWhen a user uses a passive-interface configuration， EIGRP for IPv6 does not need to be configured on the interface that is made passive.FWhen a user uses a non-passive-interface configuration， EIGRP for IPv6 does not need to be configured on the interface that is made passive
单选题You are implementing a new frame relay network to provide connectivity between you offices. To do this, you set up the frame relay network using point-to-point subinterfaces.Which of the following does NOT need to be configured?（）AThe Frame Relay encapsulation on the physical interface.BThe local DLCI on each subinterface.CAn IP address on the physical interface.DThe subinterface type as point-to-point.
单选题A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?（）Aan OSPF update for network 192.168.0.0/16Ba static router to network 192.168.10.0/24Ca static router to network 192.168.10.0/24 with a local serial interface configured as the next hopDa RIP update for network 192.168.10.0/24Ea directly connected interface with an address of 192.168.10.254/24Fa default route with a next hop address of 192.168.10.1
多选题Youe just configured the network interface on You？e just configured the network interface on systemA and the following information is displayed pertaining to systemA’s network interface： You have been instructed to change the name of this system to systemB. Which four files need to be modified to change the name of this system from systemA to systemB？ （）A/etc/nodenameB/etc/hostname.rtls0C/etc/hostnameD/etc/inet/hostsE/etc/domainnameF/etc/inet/ipnodesG/etc/inetd.conf
单选题You have just configured the network interface on systemA . The following information is From systemB， you test the network connectivity by sending ICMP ECHO_REQUEST packets to systemA. The following message is displayed： no answer from systemA What is most likely the problem？（）A The interface is not plumbed.B The interface is not configured.C The interface does not have valid routes configured.D The interface is not marked as
多选题You are using AutoQoS Enterprise and realize that the results are not what you expected. Whichof the following are possible reasons for AutoQoS not functioning correctly？（Choose all thatapply.）（）AThe interface you configured for AutoQoS is set to half-duplexBAutoQoS was configured on only one end of the linkCThe interface you configured for AutoQoS has no IP addressDThe interface’s bandwidth is not correctly configuredECEF is not enabled on the interfaceFYou enabled AutoQoS on the interface but forgot to enable globally first
单选题You have a server named Server2 that runs Windows Server 2003 Service Pack 2 (SP2). The server has two network connections named Local Area Connection and Internet Connection.You configure network address translation (NAT) on Server2 as shown in the exhibit. (Click the Exhibit button.) You configure all client computers to use Server2 as their default gateway.Users report that they cannot connect to the Internet. You successfully connect to the Internet from Server2.You need to ensure that client computers can access Internet resources. What should you do?（）AChange the Internet Connection interface type to Basic firewall only. BChange the Internet Connection interface type to Private interface connected to private network. CAdd Local Area Connection as a new interface for the NAT protocol and set the interface as a Public interface connected to the Internet. DAdd Local Area Connection as a new interface for the NAT protocol and set the new interface as a Private interface connected to private network.