单选题You install 10 USB tablets on 10 Windows 2000 Professional computers with built-in USB controllers. After installing the tablet software， you notice that the tablets cannot communicate with the computers. What must you do to recover from this problem？（）AEnable the USB root hub controller and reinstall the USB tablet device drivers.BDisable USB error detection for the USB root hub controller and enable the USB tablet within the Device Manager.CReinstall the USB device drivers and disable USB error detection.DEnable the USB ports in the BIOS and reinstall the USB tablet device drivers.
单选题
You install 10 USB tablets on 10 Windows 2000 Professional computers with built-in USB controllers. After installing the tablet software， you notice that the tablets cannot communicate with the computers. What must you do to recover from this problem？（）
A
Enable the USB root hub controller and reinstall the USB tablet device drivers.
B
Disable USB error detection for the USB root hub controller and enable the USB tablet within the Device Manager.
C
Reinstall the USB device drivers and disable USB error detection.
D
Enable the USB ports in the BIOS and reinstall the USB tablet device drivers.
参考解析
解析：
暂无解析
相关考题：
You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional.What should you do?A．When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B．Disable the disk compression in Windows NT Workstation.C．Install service pack four or later in Windows NT Workstation.D．Install the distributed file system client on the Windows NT Workstation.
your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?（）A.Install service pack 4 on all windows 2000 professional computers.B.Upgrade the windows 2000 professional computers to windows XP SP2.C.Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.D.Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.
Ezonexam.com's network consists of Windows 2000 Professional and UNIX client computers. You install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network protocol.Several laser print devices are attached to the UNIX computers. You want to enable the Windows 2000 Professional computers to print to these printers. You want to make the minimum number of configuration changes necessary to achieve this goal.What should you do?A．Install Simple TCP/IP services on the Windows 2000 Server computer. Configure printers on the Windows 2000 Server computer to print to the print device attached to the UNIX computers.B．Install Print Services for UNIX on the Windows 2000 Server computer. Configure shared printers on the Windows 2000 Server computer. Configure the UNIX computers to print to these shared printers.C．Disconnect the print devices from the UNIX computers and connect them to the Windows 2000 Server computer. Share the printers, and configure the Windows 2000 Professional computers and the UNIX computers to print to the shared printers.D．On the Windows 2000 Server computer, configure shared printers that connect to the print devices attached to the UNIX computers. Configure the Windows 2000 Professional computers to print to the shared printers on the Windows 2000 Server computer.
You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）A、Configure Windows 2000 Professional to enable driver signing.B、Configure Windows 2000 Professional to disable driver signing.C、Start the computer by using the recovery console， restore the system state data.D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
Your company has servers that run Windows Server 2008. All client computers run Windows XP Service Pack 2 （SP2）. Windows 2003 Professional， or Windows Vista. You need to ensure all computers can use the IPv6 protocol. What should you do（）A、Install Serivce Pack 4 on all Windows 2000 Professional computersB、Upgrade the Windows 2000 professional computers to Windows XP SP2C、Run the IPv6.exe tool on the Windows 200 Professional and Windows XP computersD、Install Active Directory Client extention （DSClient.exe） on the Windows 2000 Professional and Windows XP computers.
You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically. You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers. What should you do?（）A、Configure the DHCP scope to add additional IP addresses.B、Run Rbfg.exe from the RemoteInstall/Admin folder on the RIS server.C、Modify the startup sequence in the CMOS of the remaining computers.D、Create computer accounts on the remaining computers in the active directory.
You are the administrator of your company’s network. You install Windows 2000 Professional on 10 computers in the graphics department. The 10 computers have built in USB controllers. You physically install a USB tablet pointing device on each computer. You install the 32-bit manufacturer tablets software on each computer. A tablet icon appears in the central panel to configure the device but the device does not work. You want the USB tablets to work on 10 computers. What should you do?（）A、Enable the USB ports in the BIOS and reinstall the USB tablet device drivers.B、Enable the USB root hub controller and reinstall the USB tablet device drivers.C、Disable the USB error detection for the USB root hub controller and enable the USB tablet device in the hardware profile.D、Reinstall the USB device drivers and disable the USB error detection.
You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional. What should you do？（）A、 When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B、 Disable the disk compression in Windows NT Workstation.C、 Install service pack four or later in Windows NT Workstation.D、 Install the distributed file system client on the Windows NT Workstation.
You have a computer with a USB keyboard that is running Windows 2000 Professional. You install a USB scanner on this system. The system asks for the driver and you install them. After you restart your computer， you notice that the keyboard doesn’t work anymore. What should you do in order to make both， the keyboard and the scanner work？ （）A、Update the scanner drivers using certified driversB、Enable the USB port in the computers BIOSC、USB keyboards DO NOT existD、Enable the USB hub controllerE、Reinstall the USB device driver and disable the USB error detection
You are the administrator of ExamSheet.net's network. You attempt to install a video driver on a Windows 2000 Professional computer. You receive the following error message: "Error 11 - Cannot install video driver." The driver was originally downloaded from the video card manufacturer's Web site. You have successfully used the driver in the past on other Windows 2000 Professional computers. You want to configure the Windows 2000 Professional computer to check for driver integrity and to allow you to install this video driver. What should you do? （）A、Use the Hardware troubleshooter. Configure the computer to prevent the installation of unsigned drivers. B、Use the Add Hardware wizard to install the driver. Create a Local Computer Policy to enable Windows File ProtectionC、Configure driver signing to ignore File Signature Verification. Create a Local Computer Policy to enable Windows File ProtectionD、Configure theUnsigned driver installation behaviorpolicy setting to beWarn but allow installation
your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?（）A、Install service pack 4 on all windows 2000 professional computers.B、Upgrade the windows 2000 professional computers to windows XP SP2.C、Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.D、Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.
You are administering a Windows 2000 Professional， single Pentium II 400Mhz processor computer. You need to install a new accounting software application. The software manufacturer recommends that you use a dual-processor configuration. First， you install a second identical processor in your computer. You need to ensure that you will be able to install the new software. What should you do next？（）A、 Update the HAL to support multiple processors.B、 In Device Manager， disable the direct memory access controller.C、 Use the Add/Remove Hardware Wizard to detect and install the driver for the new processor. D、 Reinstall Windows 2000 Professional to support a multi-processor configuration.
You are the administrator of your company’s network. You network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations. You want to accomplish the following goals: An unattended installation of the upgraded applications will be performed on the Windows 20000 Professional computers. Existing user environments will be maintained on the Windows 2000 Professional computers. The network name of each Windows 2000 Professional computer will be changed to match its asset tag. The RIS image and the upgraded applications will be enabled as they are added to the network. You take the following actions: Install the RIS image on a Windows 20000 Professional computer named Computer1. Install the upgraded applications on Computers1. Change the network name of Computer1 to %DMI-SERIAL_NUM%. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server. Which result or results do these actions produce?（ ）A、An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.B、Existing user environments will be maintained on the Windows 2000 Professional computers.C、The network name of each Windows 2000 Professional computer will be changed to matchIts asset tag.D、The RIS image and the upgraded applications will be enabled as they are added to the N.etwork.
You are the administrator of a Windows 2000 network that has 1,500 Windows 2000 Professional computers. Microsoft Office 2000 was assigned to all the computers on the network by using a Group Policy object (GPO). You deploy the Office 2000 service release to all the Windows 2000 Professional computers on the network. The service release, in addition to other software that had been assigned, fails to install on only one of the computers. What should you do? （）A、Redeploy the service release by using a .Zap file. B、Redeploy the service release by using a .mst file. C、Restart Windows installer on the domain controller. D、Restart Windows installer on the computer that failed to install the service release.
You are the administrator of a Windows 2000 Professional network that has 1500 Windows 2000 Professional computers. Microsoft Office 2000 was installed to all the computers over the network by using Group Policy Object. You deploy an Office 2000 service release to all the Windows 2000 Professional computers on the network. The service release in addition to other software that had been assigned fails to install on only one of the computer. What should you do？（）A、Re-deploy the service release by using a .ZAP file. B、Re-deploy the service release by using a .MST file. C、Restart windows installer on the domain controller. D、Restart windows installer on the computer that failed to install the service release. E、Restart Windows installer and use an .MSP file.
You install 10 USB tablets on 10 Windows 2000 Professional computers with built-in USB controllers. After installing the tablet software， you notice that the tablets cannot communicate with the computers. What must you do to recover from this problem？（）A、Enable the USB root hub controller and reinstall the USB tablet device drivers.B、Disable USB error detection for the USB root hub controller and enable the USB tablet within the Device Manager.C、Reinstall the USB device drivers and disable USB error detection.D、Enable the USB ports in the BIOS and reinstall the USB tablet device drivers.
You are the administrator of your company's network. You install 220 new Windows 2000 Professional computers in the Sales department. Two weeks later users report that five of the computers have stopped responding. You troubleshoot the five computers and find that the users have attached USB devices and have installed device drivers that are not supported by Windows 2000 Professional. You want to ensure that it does not happen again. You decide to configure the computer to install device drivers only for the devices that are included on the current hardware compatibility list (HCL). What should you do?（）A、Use NTFS permission to restrict users access to the C:///WinNT/driver cache folder.B、Use NTFS permission to restrict users access to the C:///WinNT/system32/drivers folder.C、Configure Windows 2000 Professional to enable driver signing verification.D、Configure Windows 2000 Professional to trust the Microsoft certificate authority （CA）.
You are the network administrator for The network consists of a single Active Directory domain named Servers run either Windows 2000 Server or Windows Server 2003. Client computers run either Windows 2000 Professional Service Pack 2 or Windows XP Professional. You need to implement a new software update infrastructure. You discover that security patches, critical updates, and service packs have never been installed on any client computer on the network. You install Software Update Services (SUS) on a Windows Server 2003 computer named Testking5. You must ensure that all client computers receive all Microsoft security patches, critical updates, and service packs. You want to achieve this goal as quickly as possible. Which three actions should you perform? （）(Each correct answer presents part of the solution. Choose three)A、Install the Automatic Updates client on all Windows 2000 Professional client computers.B、Install the Automatic Updates client on all Windows XP Professional client computers.C、Install SUS on a Windows 2000 Server computer.D、Modify the Windows Update settings of the Default Domain Controller organizational unit (OU) Group Policy object (GPO) to point client computers to http://testking5.E、Modify the Windows Update settings of the Default Domain Policy Group Policy object (GPO) to point client computers to http://testking5.F、Upgrade all Windows 2000 Professional client computers to Windows XP Professional.
You want to configure your Windows NT Workstation 4.0 computer Company1 to run both Windows NT Workstation and Windows 2000 Professional. What should you do before installing Windows 2000 Professional on Company1? （）A、 Run Check Disk in Windows NT Workstation 4.0.B、 Disable disk compression in Windows NT Workstation 4.0.C、 Install Service Pack 4 or later for Windows NT Workstation 4.0.D、 Install the Distributed file system （Dfs） client in Windows NT Workstation 4.0.
单选题You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically. You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers. What should you do?（）AConfigure the DHCP scope to add additional IP addresses.BRun Rbfg.exe from the RemoteInstall/Admin folder on the RIS server.CModify the startup sequence in the CMOS of the remaining computers.DCreate computer accounts on the remaining computers in the active directory.
单选题You have a computer with a USB keyboard that is running Windows 2000 Professional. You install a USB scanner on this system. The system asks for the driver and you install them. After you restart your computer， you notice that the keyboard doesn’t work anymore. What should you do in order to make both， the keyboard and the scanner work？ （）AUpdate the scanner drivers using certified driversBEnable the USB port in the computers BIOSCUSB keyboards DO NOT existDEnable the USB hub controllerEReinstall the USB device driver and disable the USB error detection
多选题You want to install windows 2000 professional on a system. which two commands can be used to run the setup of Windows 2000 professional. （）AWINNT*EXEBSETUP*EXECWINNT32*EXEDINSTALLER*EXE
多选题You are the administrator of your company’s network. You network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations. You want to accomplish the following goals: An unattended installation of the upgraded applications will be performed on the Windows 20000 Professional computers. Existing user environments will be maintained on the Windows 2000 Professional computers. The network name of each Windows 2000 Professional computer will be changed to match its asset tag. The RIS image and the upgraded applications will be enabled as they are added to the network. You take the following actions: Install the RIS image on a Windows 20000 Professional computer named Computer1. Install the upgraded applications on Computers1. Change the network name of Computer1 to %DMI-SERIAL_NUM%. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server. Which result or results do these actions produce?（ ）AAn unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.BExisting user environments will be maintained on the Windows 2000 Professional computers.CThe network name of each Windows 2000 Professional computer will be changed to matchIts asset tag.DThe RIS image and the upgraded applications will be enabled as they are added to the N.etwork.
单选题You are the administrator of your company's network. You install 220 new Windows 2000 Professional computers in the Sales department. Two weeks later users report that five of the computers have stopped responding. You troubleshoot the five computers and find that the users have attached USB devices and have installed device drivers that are not supported by Windows 2000 Professional. You want to ensure that it does not happen again. You decide to configure the computer to install device drivers only for the devices that are included on the current hardware compatibility list (HCL). What should you do?（）AUse NTFS permission to restrict users access to the C:///WinNT/driver cache folder.BUse NTFS permission to restrict users access to the C:///WinNT/system32/drivers folder.CConfigure Windows 2000 Professional to enable driver signing verification.DConfigure Windows 2000 Professional to trust the Microsoft certificate authority （CA）.
单选题You are the administrator of a Windows 2000 Professional network that has 1500 Windows 2000 Professional computers. Microsoft Office 2000 was installed to all the computers over the network by using Group Policy Object. You deploy an Office 2000 service release to all the Windows 2000 Professional computers on the network. The service release in addition to other software that had been assigned fails to install on only one of the computer. What should you do？（）ARe-deploy the service release by using a .ZAP file. BRe-deploy the service release by using a .MST file. CRestart windows installer on the domain controller. DRestart windows installer on the computer that failed to install the service release. ERestart Windows installer and use an .MSP file.
单选题You are the administrator of your company’s network. You install Windows 2000 Professional on 10 computers in the graphics department. The 10 computers have built in USB controllers. You physically install a USB tablet pointing device on each computer. You install the 32-bit manufacturer tablets software on each computer. A tablet icon appears in the central panel to configure the device but the device does not work. You want the USB tablets to work on 10 computers. What should you do?（）AEnable the USB ports in the BIOS and reinstall the USB tablet device drivers.BEnable the USB root hub controller and reinstall the USB tablet device drivers.CDisable the USB error detection for the USB root hub controller and enable the USB tablet device in the hardware profile.DReinstall the USB device drivers and disable the USB error detection.
多选题You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）AConfigure Windows 2000 Professional to enable driver signing.BConfigure Windows 2000 Professional to disable driver signing.CStart the computer by using the recovery console， restore the system state data.DStart the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.EStart the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.