Floppy disk fail的意思是（）。A、硬盘故障B、无法驱动光驱C、无法驱动软驱D、无法引导软驱
Floppy disk fail的意思是（）。
- A、硬盘故障
- B、无法驱动光驱
- C、无法驱动软驱
- D、无法引导软驱
相关考题：
A folder on your Windows 2000 Professional computer contains bitmap files that have been compressed from 2MB to 1MB. You want to copy one of the compressed bitmap files from the hard disk to 1.4-MB floppy disk.When you attempt to copy, you receive the following error message 'Destination drive is Full'.What should to do?A．Move, rather than copy, the compressed bitmap file to the floppy disk.B．Reformat the floppy disk. Then copy the compressed bitmap file to the floppy disk.C．Use another program to compress the bitmap file before copying it to the floppy disk.D．Copy an empty compressed folder to the floppy disk. Then copy the compressed bitmap file to the folder on the floppy disk.
A technician replaced a floppy drive and now the front indicator light is consistently illuminated.Which of the following is the cause for this?() A. It is a feature of new floppy drives.B. The data cable was put on backwards.C. A disk is being read by the floppy drive.D. The new floppy drive is defective.
Which of the following switches for the FORMAT command line utility allows Bob, a technician, toformat a floppy disk the FASTEST?() A./cB./qC./xD./v
POST errors in the 17xx range generally indicate ()errors. A.USBB.Floppy disk driveC.MotherboardD.Hard disk driveE.COM1
You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server contains one volume that has 60 GB of used space.You create an Automated System Recovery (ASR) backup. You lose the ASR floppy disk.You need to create an ASR floppy disk for the server. You must achieve this goal in the minimum amount of time.You insert a formatted floppy disk into the server.What should you do next? （）A. From Windows Backup, run the ASR Wizard.B. From Windows Backup, back up the system state to floppy disk.C. From the %systemroot%\repair folder, copy asr.sif, asrpnp.sif, and setup.log to the floppy disk.D. From the %systemroot%\inf folder, copy windows.adm, asroc.inf, and asroc.pnf to the floppy disk.
下列哪个选项是硬盘故障选项（）A、Press ESC to skip memory testB、Floppy Disk(s) fail 或 Floppy Disk(s) fail(80) 或Floppy Disk(s) fail(40)C、Memory test failD、Hard disk(s) diagnosis fail
A folder on your Windows 2000 Professional computer contains bitmap files that have been compressed from 2MB to 1MB. You want to copy one of the compressed bitmap files from the hard disk to 1.4-MBfloppy disk. When you attempt to copy， you receive the following error message ‘Destination drive is Full’. What should to do？（）A、Move， rather than copy， the compressed bitmap file to the floppy disk.B、Reformat the floppy disk.Then copy the compressed bitmap file to the floppy disk.C、Use another program to compress the bitmap file before copying it to the floppy disk.D、Copy an empty compressed folder to the floppy disk. Then copy the compressed bitmap file to the folder on the floppy disk.
A technician replaced a floppy drive and now the front indicator light is consistently illuminated.Which of the following is the cause for this?（）A、It is a feature of new floppy drives.B、The data cable was put on backwards.C、A disk is being read by the floppy drive.D、The new floppy drive is defective.
The error ’invalid boot disk’ means：（）A、the BIOS settings are incorrect.B、there is no floppy disk in the drive.C、the computer was unable to make temporary space for the boot process.D、the computer was unable to find the information needed to start the boot process.
When attempting to boot a PC, the POST process completes without error. The PC then displays,‘non system disk or disk error’. Which of the following would MOST likely cause the issue?（）A、Out-of-date BIOSB、Invalid motherboard jumper settingsC、Failing power supplyD、Floppy disk in the drive
Which of the following switches for the FORMAT command line utility allows Bob, a technician, toformat a floppy disk the FASTEST?（）A、/cB、/qC、/xD、/v
POST errors in the 17xx range generally indicate （）errors.A、USBB、Floppy disk driveC、MotherboardD、Hard disk driveE、COM1
You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server contains one volume that has 60 GB of used space. You create an Automated System Recovery (ASR) backup. You lose the ASR floppy disk. You need to create an ASR floppy disk for the server. You must achieve this goal in the minimum amount of time. You insert a formatted floppy disk into the server. What should you do next? （）A、From Windows Backup, run the ASR Wizard.B、From Windows Backup, back up the system state to floppy disk.C、From the %systemroot%/repair folder, copy asr.sif, asrpnp.sif, and setup.log to the floppy disk.D、From the %systemroot%/inf folder, copy windows.adm, asroc.inf, and asroc.pnf to the floppy disk.
You encrypt your files to ensure the security of the files. You want to make a backup copy of the files and maintain their security settings. You have the option of backing up to either the network or floppy disk. What should you do？（）A、Copy the files to a network share on an NTFS volume and do nothing further.B、Copy the files to a network share on a FAT 32 volume and do nothing further.C、Copy the files to a floppy disk that has been formatted by using Windows 2000 Professional. D、Place the files in an encrypted folder， and then copy the folder to floppy disk.
You are the network administrator for All network servers run Windows Server 2003. A member server named TestKingA contains two volumes. You need to perform a complete backup of the data on TestKingA. You must ensure that TestKingA can be completely restored in case of hardware failure. Which two actions should you perform? （）(Each correct answer presents part of the solution. Choose two)A、Create an Automated System Recovery (ASR) backup.B、Create a backup of user data.C、Create a Windows Server 2003 bootable floppy disk.D、Create a DOS bootable floppy disk.E、Copy all Windows Server 2003 boot files to the Windows Server 2003 bootable floppy disk.F、Copy only Boot.ini to the Windows Server 2003 bootable floppy disk
You are the desktop administrator for your company. The company's network contains a RIS server, a DHCP server, and a DNS server. You need to install Windows XP Professional on a computer that does not have a CD-ROM drive. The computer has the following configuration: a Pentium III 1-GHz processor, a 5-GB hard disk, 128 MB of RAM, a modem in the first PCI slot ,an Ethernet card in the last ISA slot. You attempt to install Windows XP Professional on the computer by using a RIS bootable floppy disk. However, you are unable to connect to the RIS server. What should you do?（） A、Move the Ethernet card to the first ISA slot. B、Remove the Ethernet card and replace it with an Ethernet card that is PXE compliant. C、Share the RIS image on the RIS server. Create a network bootable floppy disk. Insert the floppy disk, and install Windows XP Professional from the share. D、Place the NDIS network drivers in the root directory of the RIS bootable floppy disk. Use the floppy disk to connect to the RIS server.
You have a computer that runs Windows XP Professional. You need to create a floppy disk to start Windows XP Professional on the computer if the start files become corrupt. What should you do?（） A、From the Windows XP Professional computer, run diskcopy.exe /v a:.B、From a computer that runs Windows 98, create a MS-DOS-based startup disk. C、From the Windows XP Professional computer, create an Automated System Recovery (ASR) disk. D、From the Windows XP Professional computer, format a floppy disk. Copy the NTLDR, ntdtetect.com, and boot.ini files to the floppy disk.
单选题You encrypt three files to ensure the security of the files. You want to make a backup copy of these three files and maintain their security settings. You have the option of backing up to either the network or a floppy disk. What should you do？（）ACopy the files to a network share on an NTFS volume. Do nothing further.BCopy the files to a network share on a FAT32 volume. Do nothing further.CCopy the files to a floppy disk that has been formatted by using Win2000 Professional. Do nothing further.DPlace the files in an encrypted folder. Then copy the folder to a floppy disk.
单选题A technician replaced a floppy drive and now the front indicator light is consistently illuminated.Which of the following is the cause for this?（）AIt is a feature of new floppy drives.BThe data cable was put on backwards.CA disk is being read by the floppy drive.DThe new floppy drive is defective.
单选题Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?（）ARandom bluescreen errorBInaccessible boot driveCMissing NTLDRDInvalid boot disk
单选题Which of the following switches for the FORMAT command line utility allows Bob, a technician, toformat a floppy disk the FASTEST?（）A/cB/qC/xD/v
单选题You have some compressed bitmap files in a directory of your Windows 2000 Professional computer. The file compression has reduced their size from 2 MB to 1 MB. You attempt to copy them to a floppy disk, but an error reports that the destination drive is full. How can you copy the bitmap files to a 1.44 MB floppy disk? （）AUse a third-party file compression utility to create a compressed archive containing the bitmap files. Copy the compressed archive to the floppy disk.BCreate an empty compressed folder on the floppy disk， and copy the files to the new folder.CFormat the floppy disk as NTFS， and restart the copy operation.DConfirm that the cluster size on the NTFS volume is greater than 32k.
单选题You are the desktop administrator for Company.com’s sales department. Company.com’s network contains a RIS server. You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）A Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. B Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. C Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk. D Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk. E Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.
单选题You are the desktop administrator for your company's sales department. The company's network contains a RIS server. You need to install Windows XP Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows XP Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disks on which to install Windows XP Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）AAdd an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. BAdd the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. CStart the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk. DStart the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk. EStart the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.