多选题Your company wants Server 1/eth0 (vNIC 1) configured so that it always uses Fabric Interconnect A Port Channel 1 (Po1) when it communicates with anything outside of the Cisco UCS domain. However, if vNIC 1 fails over to Fabric Interconnect B using fabric failover, then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true? ()AThe fabric interconnects must be in end-host mode.BA pin group must be configured on the server tab in Cisco UCS Manager.CIn the service profile for Server 1, vNIC 1 must be explicitly assigned to a pin group.DServer 1 cannot be configured to meet the requirement. A server can only be manually pinned to a single physical interface and not a port channel because of the LACP load-balancing algorithm.EServer 1 cannot be configured to meet the requirement. A server is either manually pinned to an uplink on both fabric interconnects or the server is automatically pinned, but not both.

多选题
Your company wants Server 1/eth0 (vNIC 1) configured so that it always uses Fabric Interconnect A Port Channel 1 (Po1) when it communicates with anything outside of the Cisco UCS domain. However, if vNIC 1 fails over to Fabric Interconnect B using fabric failover, then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true? ()
A

The fabric interconnects must be in end-host mode.

B

A pin group must be configured on the server tab in Cisco UCS Manager.

C

In the service profile for Server 1, vNIC 1 must be explicitly assigned to a pin group.

D

Server 1 cannot be configured to meet the requirement. A server can only be manually pinned to a single physical interface and not a port channel because of the LACP load-balancing algorithm.

E

Server 1 cannot be configured to meet the requirement. A server is either manually pinned to an uplink on both fabric interconnects or the server is automatically pinned, but not both.


参考解析

解析: 暂无解析

相关考题:

Your network contains the servers configured as shown in the following table. Name Server role Private IP address Public IP address Server1Routing and Remote Access server192.168.1.1 131.107.0.1 Web1 Web server 192.168.1.2 ? Your company is assigned the public IP addresses from 131.107.0.1 to 131.107.0.31.You need to ensure that Web1 is accessible from the Internet by using https://131.107.0.2.What should you do from the Routing and Remote Access console?()A. From the Static Routes node, configure a static route.B. From the server properties, configure SSL Certificate Binding.C. From the NAT interface, add an address pool and a reservation.D. From the NAT interface, configure the Secure Web Server (HTTPS) service.

YourcompanywantsServer1/eth0(vNIC1)configuredsothatitalwaysusesFabricInterconnectAPortChannel1(Po1)whenitcommunicateswithanythingoutsideoftheCiscoUCSdomain.However,ifvNIC1failsovertoFabricInterconnectBusingfabricfailover,thenvNIC1cananyuplinkportonFabricInterconnectB.Whichstatementsaretrue?()A.Thefabricinterconnectsmustbeinend-hostmode.B.ApingroupmustbeconfiguredontheservertabinCiscoUCSManager.C.IntheserviceprofileforServer1,vNIC1mustbeexplicitlyassignedtoapingroup.D.Server1cannotbeconfiguredtomeettherequirement.AservercanonlybemanuallypinnedtoasinglephysicalinterfaceandnotaportchannelbecauseoftheLACPload-balancingalgorithm.E.Server1cannotbeconfiguredtomeettherequirement.Aserveriseithermanuallypinnedtoanuplinkonbothfabricinterconnectsortheserverisautomaticallypinned,butnotboth.

You work as the IT professional in an international company which is named Wiikigo. You are experiencedin implementing and administering a network operating system. You are specialized in deploying servers,configuring Windows Server 2008 Terminal services and network application services, and configuring aweb services infrastructure. A Windows Server 2008 server is contained by your company and the WebServer (IIS) server role is installed on the server. A Web site is included by the server. Since you are thetechnical report, you are required to encrypt the cookies sent from the Web site on users computers. Which Web site feature should be configured to achieve the goal?()A、To achieve the goal, Authorization Rules should be configured.B、To achieve the goal, Pages And Controls should be configured.C、To achieve the goal, SSL Settings should be configured.D、To achieve the goal, Machine Key should be configured.

Your company wants Server 1/eth0 (vNIC 1) configured so that it always uses Fabric Interconnect A Port Channel 1 (Po1) when it communicates with anything outside of the Cisco UCS domain. However, if vNIC 1 fails over to Fabric Interconnect B using fabric failover, then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true? ()A、 The fabric interconnects must be in end-host mode.B、 A pin group must be configured on the server tab in Cisco UCS Manager.C、 In the service profile for Server 1, vNIC 1 must be explicitly assigned to a pin group.D、 Server 1 cannot be configured to meet the requirement. A server can only be manually pinned to a single physical interface and not a port channel because of the LACP load-balancing algorithm.E、 Server 1 cannot be configured to meet the requirement. A server is either manually pinned to an uplink on both fabric interconnects or the server is automatically pinned, but not both.

Your company has a server named SRV1 that runs windows server 2008. The default print server role is installed on SRV1 the company wants to centralize printing on SRV1 for both UNIX and windows users. You need to provide support to the UNIX users who print on SRV1. What are two possible ways to achieve this goal? ()A、Install the internet printing server role on SRV1.B、Install the line printer daemon (LPD) services role service on SRV1.C、Configure the printers on SRV1 to use line printer remote printing.D、Install the file server role on SRV1 and activate the services for the NFS Role service option.

You are the administrator of a Windows 2000 network. The network consists of a Windows 2000 domain named Company.com. You install Windows 2000 Professional on a new computer named ES1 and configure the TCP/IP settings to have a static IP address. You plan to join ES1 to the Company.com domain. You configure two DNS server addresses in the TCP/IP properties. The first DNS server address is for a DNS server hosted by your ISP, the second DNS server address is for a DNS server authoritative for the Company.com domain. When you attempt to join ES1 to the domain, you are unable to do so. You can successfully PING the IP address of each DNS server from ES1. You want ES1 to be able to join the Company.com domain. What should you do?()A、Delete the second DNS server entry.B、Delete the first DNS server entry.C、Add an A (host) record for the computer to the appropriate DNS zone.D、Configure the computer to Obtain an IP address automatically.

Your company has a server named Server1 that runs a Server Core installation of Windows Server 2008, and the DNS Server server role. Server1 has one network interface named Local Area Connection. The static IP address of the network interface is configured as 10.0.0.1. You need to create a DNS zone named local.contoso.com on Server1.  Which command should you use?()A、ipconfig /registerdns:local.contoso.comB、dnscmd Server1 /ZoneAdd local.contoso.com /DSPrimaryC、dnscmd Server1 /ZoneAdd local.contoso.com /Primary /file local.contoso.com.dnsD、netsh interface ip v4 set dnsserver name= local.contoso.com static 10.0.0.1 primary

All servers and client computers in your company are configured to use WINS for name resolution. The internal network is separated from a perimeter network (also known as DMZ) by a third-party firewall. Firewall rules do not allow name resolution between the internal network and the perimeter network. You move a Windows Server 2003 server named Server1 to the perimeter network. You need to ensure that all computers on the internal network can connect to Server1 by name.  What should you do?()A、 Create an LMHOSTS file on Server1.B、 Create a static WINS entry for Server1.C、 Configure Server1 to use Broadcast (B-node) mode.D、 Configure Server1 to use Peer-to-Peer (P-node) mode.

You are employed as the exchange administrator at Company.com.the Company.com network contains an exchange server 2010 organization.Company.com has its headquarters in chicago where you are located.The organization contains a single server named -ex01.you receive numerous complaints from users stating that they receive a vast amount of spam messages.management wants you to decrease the amount of spam users in the organization receive. What should you do?()A、Your best option would be to have a Transport Protection Rule created.Thereafter a journal rule can be created.B、Your best option would be to run the Install-AntispamAgents.ps1 script.Thereafter the transport agents can be configured.C、Your best option would be to have a journal rule created.Thereafter an Outlook Protection Rule can be created.D、Your best option would be to run the AntispamCommon.ps1 script.Thereafter a Transport Protection Rule can be created.

Your company has a server named Server1 that runs Windows Server 2008. Server1 is a Windows ServerUpdate Services (WSUS) server. You have a computer named Computer1 that runs Windows 7. Computer1 is configured to obtain updates from Server1. You open the WSUS snap-in on Server1 and discover that Computer1 does not appear. You need to ensure that Computer1 appears in the WSUS snap-in.  What should you do?()A、On Server1, open Windows Update then select Check for updates.B、On Server1, run Wsusutil.exe and specify the /import parameter.C、On Computer1, open Windows Update and then select Change settings.D、On Computer1, run Wuauclt.exe and specify the /detectnow parameter.

You are the network administrator for your company. All network servers run Windows Server 2003. A member server named Server1 hosts several hundred folders, which are located on multiple volumes on the server. A backup job on Server1 is configured to run a normal backup of the folders every Saturday at 1:00 A.M. On Wednesday morning, you discover that you need to install a new application on Server1 before the close of business that day. You need to back up all folders on Server1 as quickly as possible so you can install the new application. What should you do? ()A、Create a new backup job that specifies the folders and runs once only.B、Run the existing backup job.C、Enable Volume Shadow Copy for the volumes that contain the folders.D、Create an Automated System Recovery (ASR) set.

Your company has a server named SRV1 that runs Windows Server 2008. The default Print Server role is installed on SRV1 The company wants to centralize printing on SRV1 for both UNIX and Windows users. You need to provide support to the UNIX users who print on SRV1. What are two possible ways to achieve this goal?() A、 Install the Internet Printing server role on SRV1.B、 Install the Line Printer Daemon (LPD) Services role service on SRV1C、 Configure the printers on SRV1 to use Line Printer Remote printingD、 Install the File Server role on SRV1 and activate the services for the NFS Role Service option.

Your company ahs an active direcotyr domain. The company also has a server named Server1 that runs Windows Server 2008. You install the file server role on Server1. you create a shared folder named AcctgShare on Server1 The permissions for the shared folder are configured as shown in the following table. ( missing again!) You need to ensure members of the Managers group can only view and open files in the shared folder.  What should you do()?  A、Modify the share permissions for the Managers group to ReaderB、Modify the share permisisons for the Accounting Users group to ContributorC、Modify the NTFS permisisons for the Managers group to ModifyD、Modify the NTFS permissions for the authenticated users group to modify and the share permissions to contributer.

You are a database administrator for your company. You are configuring a new SQL Server 2005 computer named SQL1. SQL1 will run Reporting Services. It will also be configured to automatically perform database backups and other maintenance tasks. There are no other SQL Server computers in the network environment. All access to SQL1 will be made by using SQL1s DNS name. You need to disable any unnecessary services on SQL1. Which service or services should you disable?()A、Internet Information ServicesB、SQL Server BrowserC、SQL Server AgentD、Microsoft Distributed Transaction Coordinator

单选题Your company has an Active Directory domain. The company also has a server named Server1 that runs Windows Server 2008. You install the File Server role on Server1. You create a shared folder named AcctgShare on Server1. The permissions for the shared folder are configured as shown in the following table. (AGAIN EXHIBIT IS MISSING FROM PASS4SURE) You need to ensure members of the managers group can only view and open files in the shared folder. ()A Modify the share permissions for the Managers group to Reader.B Modify the share permissions for the Accounting Users group to ContributerC Modify the NTFS permissions for the Managers group to ModifyD Modify the NTFS permissions for the Authenticated Users group to Modify and the share permissions to contributer

单选题Your company has a DNS server named Server1. Your partner company has a DNS server named Server2. You create a stub zone on Server1. The master for the stub zone is Server2. Server2 fails. You discover that users are not able to resolve names for the partner company. You need to ensure that users are able to resolve names for the partner company in the event that Server2 fails. What should you do?()A Change the stub zone to a secondary zone on Server1B Open the SOA record for the zone on Server2. Change the Minimum (default) TTL setting to 12 hours.C Open the DNS zone for the partner company on Server2. Create a new Route Through (RT) record and a new host (A) record for Server1.D Open the primary DNS zone on Server2. Create a new Service Locator (SRV) record and a new host(A) record for Server1.

单选题Your company has a server named Server1 that runs Windows Server 2008. Server1 is a Windows ServerUpdate Services (WSUS) server. You have a computer named Computer1 that runs Windows 7. Computer1 is configured to obtain updates from Server1. You open the WSUS snap-in on Server1 and discover that Computer1 does not appear. You need to ensure that Computer1 appears in the WSUS snap-in.  What should you do?()AOn Server1, open Windows Update then select Check for updates.BOn Server1, run Wsusutil.exe and specify the /import parameter.COn Computer1, open Windows Update and then select Change settings.DOn Computer1, run Wuauclt.exe and specify the /detectnow parameter.

单选题You work as the IT professional in an international company which is named Wiikigo. You are experiencedin implementing and administering a network operating system. You are specialized in deploying servers,configuring Windows Server 2008 Terminal services and network application services,and configuring aweb services infrastructure. There is an Active Directory domain in your company. The company has aserver which is named S01. S01 has the Terminal Services server role and the TS Web Access role service installed. The company has a server named S02 that runs ISA Server 2006. The company deploysthe Terminal Services Gateway (TS Gateway) role on a new server named S03. The company wants to useISA as the SSL endpoint for Terminal Server connections. You have to configure the TS Gateway role onS03 to use ISA 2006 on S02. What action should you perform?()AA self-signed SSL certificate should be exported from S03 and the SSL certificate should be installedon S02. The ISA service on S02 should be configured to use the SSL certificate from S03.BThe TS Gateway should be configured to use SSL HTTPS-HTTP bridging.CThe Terminal Services Connection Authorization Policy Store on S03 should be configured to use S02as the Central Network Policy Server.DThe SSL certificate should be exported from S02 and the SSL certificate should be installed on S03.The TS Gateway should be configured to use the SSL certificate from S02.

单选题Your company runs Windows Server Update Services (WSUS) on a server named Server1. Server1 runs Windows Server 2008 R2. Server1 is located on the company intranet.You configure the WSUS Web site to use SSL.You need to configure a Group Policy object (GPO) to specify the intranet update locations.Which URLs should you use?()Ahttp: //SERVER1Bhttp: //SERVER1:8080Chttps: //SERVER1Dhttps: //SERVER1:8080

单选题Your network contains the servers configured as shown in the following table. Name Server role Private IP address Public IP address Server1Routing and Remote Access server192.168.1.1 131.107.0.1 Web1 Web server 192.168.1.2 ? Your company is assigned the public IP addresses from 131.107.0.1 to 131.107.0.31.You need to ensure that Web1 is accessible from the Internet by using https://131.107.0.2.What should you do from the Routing and Remote Access console?()AFrom the Static Routes node, configure a static route.BFrom the server properties, configure SSL Certificate Binding.CFrom the NAT interface, add an address pool and a reservation.DFrom the NAT interface, configure the Secure Web Server (HTTPS) service.

多选题Your company has a server named SRV1 that runs Windows Server 2008 R2. The default Print Services server role is installed on SRV1.The company wants to centralize printing on SRV1 for both UNIX and Windows users.You need to provide support to the UNIX users who print on SRV1.What are two possible ways to achieve this goal?()AInstall the Internet Printing role service on SRV1.BInstall the Line Printer Daemon (LPD) Services role service on SRV1.CConfigure the printers on SRV1 to use Line Printer Remote printing.DInstall the File Services server role on SRV1 and activate the Services for Network File System role service.

单选题You are the network administrator for your company.You work in the company’s branch office in Chicago. The network in your office consists of 40 Windows XP Professional desktop computers and one Windows Server 2003 computer named Server1. Server1 connects to the Internet through a 512-Kbps leased line. The main office of the company is in Seattle.Users of the desktop computers in the Chicago office are developers who are developing a new software product. You want these users to place daily builds of the product in a shared folder on Server1. You want developers in the Seattle office to be able to download the daily builds from Server1 by using FTP.You install IIS on Server1 and configure the FTP site so that it is available to the developers in the Seattle office. However, when you monitor inbound Internet connection attempts to Server1, you notice many attempted HTTP connections.You want to secure Server1 so that it is not susceptible to malicious Internet users. Server1 must also connect to the Internet to use Windows Update and to download virus definition updates. You do not want to purchase additional hardware or software.   What should you do on Server1?()AEnable Internet Connection Sharing (ICS).BConfigure port filtering on the network adapter to allow only TCP port 80 and TCP port 21.CEnable Internet Connection Firewall (ICF) and create a service setting in the Internet Connection Firewall settings that allows Internal and external TCP port 21 to Server1  internal and external TCP port 80 to Server1DEnable Internet Connection Firewall (ICF) and select the FTP Server check box in the Services tab. Enter Server1 as the server hosting the FTP services.

单选题Your company has a server named Server1 that runs a Windows Server 2008 Core Installation, and the DNS server role. Server1 has one network interface named Local Area Connection. The static IP address of the network interface is configured as 10.0.0.1. You need to create a DNS zone named local.contoso. com on server1. Which command should you use?()Aipconfig /registerdns:local.contoso.comBdnscmd Server1 /ZoneAdd local.contoso.com /DSPrimaryCdnscmd Server1 /ZoneAdd local.contoso.com /Primary /file local.contoso.com.dnsDnetsh interface ipv4 set dnsserver name=local.contoso.com static 10.0.0.1 primary

单选题You use a Windows 2000 Professional computer at home. You need to access shared files on a server named server1. This server is on your company’s network and is not accessible from the internet. Your company’s network also includes a third party VPN server that is accessible from the internet. You dial in to your internet service provider and then create a VPN connection to your company’s VPN server. After the connection is successfully established, you run the net view//server1 command and receive the following error ‘the server is inaccessible or could not be found’. You need to access the shared files on server 1. What should you do? ()AStop and then start the TCP/IP NetBIOS helper service on your computer.BStop and then start the DNS client service on your computer.CAdd a HOSTS entry for server1 to your computer.DAdd a LMHOSTS entry for server1 to your computer.