单选题Your network contains two DHCP servers. The DHCP servers are named DHCP1 and DHCP2. The internal network contains 1，000 DHCP client computers that are located on a single subnet. A routerseparates the internal network from the Internet. The router has a single IP address on the internal interface. DHCP1 has the following scope information. èStarting IP address： 172.16.0.1 èEnding IP address： 172.16.7.255 èSubnet mask： 255.255.240.0 You need to provide a fault-tolerant DHCP infrastructure that supports the client computers on the internal network. In the event that a DHCP server fails， all client computers must be able to obtain a valid IP address. How should you configure DHCP2？（）ACreate a scope for the subnet 172.16.0.0/20. Configure the scope to use a starting IP address of 172.16.8.1 and an ending IP address of 172.16.15.254.BCreate a scope for the subnet 172.16.0.0/21. Configure the scope to use a starting IP address of 172.16.0.1 and an ending IP address of 172.16.15.254.CCreate a scope for the subnet 172.16.8.0/21. Configure the scope to use a starting IP address of 172.16.8.1 and an ending IP address of 172.16.10.254.DCreate a scope for the subnet 172.17.0.0/16. Configure the scope to use a starting IP address of 172.17.0.1 and an ending IP address of 172.17.255.254.
单选题
Your network contains two DHCP servers. The DHCP servers are named DHCP1 and DHCP2. The internal network contains 1，000 DHCP client computers that are located on a single subnet. A routerseparates the internal network from the Internet. The router has a single IP address on the internal interface. DHCP1 has the following scope information. èStarting IP address： 172.16.0.1 èEnding IP address： 172.16.7.255 èSubnet mask： 255.255.240.0 You need to provide a fault-tolerant DHCP infrastructure that supports the client computers on the internal network. In the event that a DHCP server fails， all client computers must be able to obtain a valid IP address. How should you configure DHCP2？（）
A
Create a scope for the subnet 172.16.0.0/20. Configure the scope to use a starting IP address of 172.16.8.1 and an ending IP address of 172.16.15.254.
B
Create a scope for the subnet 172.16.0.0/21. Configure the scope to use a starting IP address of 172.16.0.1 and an ending IP address of 172.16.15.254.
C
Create a scope for the subnet 172.16.8.0/21. Configure the scope to use a starting IP address of 172.16.8.1 and an ending IP address of 172.16.10.254.
D
Create a scope for the subnet 172.17.0.0/16. Configure the scope to use a starting IP address of 172.17.0.1 and an ending IP address of 172.17.255.254.
参考解析
解析：
暂无解析
相关考题：
our company has four DNS servers that run windows 2008. Each server has a static ip address. You need to prevent dhcp from assigning the addresses of the DNS servers to DHCP clients. What should you do?（）A.Create a new scope for the DNS servers.B.Create a reservation for the DHCP serve.C.Configure the 005 name servers scope option.D.Configure an exclusion that contains the ip addresses of the four DNS servers.
Your network contains two DHCP servers named Server1 and Server2. Server1 and Server2 are located in the same subnet.You configure a split scope named Scope1 on the DHCP servers.You need to ensure that Server2 only responds to DHCP client requests if Server1 is unavailable.What should you modify？（）A. the Scope1 properties for Server1B. the Scope1 properties for Server2C. the server options for Server1D. the server options for Server2
Your network contains two DHCP servers named Server1 and Server2.On Server1, you create a scope named Scope1.You need to ensure that DHCP clients receive IP addresses from the address range in Scope1 if Server1 is unavailable. The solution must prevent both servers from assigning duplicate IP addresses.What should you do from the DHCP console？（）A、On Server1, create a superscope.B、On Server1, select Scope1, and then run the Split-Scope wizard.C、On Server2, create a scope, and then reconcile each scope.D、On Server2, create a scope, and then enable Network Access Protection.
Your network consists of a single Active Directory domain and a single network segment. All client computers are configured to receive their IP configurations automatically.You deploy two DHCP servers named Server1 and Server2. Each DHCP server has one scope. Users report IP address conflicts.You need to ensure that clients receive unique addresses. What should you do on Server1 and Server2?（）A、Create a superscope.B、Create a multicast scope.C、Configure Network Load Balancing.D、Modify the address range for the scopes on both servers.
Your network consists of a single Active Directory site that includes two network segments. Thenetwork segments connect by using a router that is RFC 1542 compliant. You plan to use Windows Deployment Services （WDS） to deploy Windows Server 2008 R2 servers. All new servers support Pre-Boot Execution Environment （PXE）. You need to design a deployment strategy to meet the following requirements： èSupport Windows Server？2008 R2 èDeploy the servers by using WDS in both network segments èMinimize the number of servers used to support WDS What should you include in your design？（） A、Deploy one server. Install WDS and DHCP on the server. Configure the IP Helper tables on therouterbetween the network segments.B、Deploy two servers. Install WDS and DHCP on both servers. Place one server on each of the network segments. Configure both servers to support DHCP option 60.C、Deploy two servers. Install WDS and DHCP on both servers. Place one server on each of the network segments. Configure both servers to support DHCP option 252.D、Deploy two servers. Install WDS and DHCP on one server. Install DHCP on the other server. Place one server on each of the network segments. Configure both servers to support DHCP option60.
You are designing a DHCP strategy to meet the business and technical requirements. What should you do？（）A、 Install one DHCP server in each branch office and one DHCP server in Los Angeles.B、 Install one DHCP server in each branch office and two DHCP servers in Los Angeles.C、 Install two DHCP servers in each branch office and one DHCP server in Los Angeles.D、 Install two DHCP servers in each branch office and two DHCP servers in Los Angeles.
Your company has four DNS servers that run Windows Server 2008. Each server has a static IP address. You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients. What should you do？ （）A、 Create a new scope for the DNS servers.B、 Create a reservation for the DHCP serverC、 Configure the 005 Name Servers scope optionD、 Configure an exclusion that contains the IP addresses of the four DNS servers
Your company has four DNS servers that run Windows Server 2008 R2. Each server has a static IP address.You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients.What should you do？（）A、Create a new scope for the DNS servers.B、Create a reservation for the DHCP server.C、Configure the 005 Name Servers scope option.D、Configure an exclusion that contains the IP addresses of the four DNS servers.
You are a network administrator for your company. The network consists of a single Active Directory domain. All domain controllers and member servers run Windows Server 2003， Enterprise Edition. All client computers run Windows XP Professional. The company has one main office and one branch office. The two offices are connected by a T1 WAN connection. There is a hardware router at each end of the connection. The main office contains 10，000 client computers， and the branch office contains 5，000 client computers. You need to use DHCP to provide IP addresses to the Windows XP Professional computers in both offices. You need to minimize network configuration traffic on the WAN connection. Your solution needs to prevent any component involved in the DHCP architecture from becoming a single point of failure. What should you do？ （）A、 At the main office， configure two Windows Server 2003 computers as a DHCP server cluster. Configure the branch office router as a DHCP relay agent.B、 At the main office， configure two Windows Server 2003 computers as a DHCP server cluster. At the branch office， configure a Windows Server 2003 computer as a DHCP relay agent.C、 At the main office， configure two Windows Server 2003 computers as a DHCP server cluster. At the branch office， configure two Windows Server 2003 computers as a DHCP server cluster.D、 At the main office， configure two Windows Server 2003 computers as DHCP servers. Configure one DHCP server to handle 80 percent of the IP address scope and the other DHCP server to handle 20 percent. Configure the branch office router as a DHCP relay agent.
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125.You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100.You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200.You need to ensure that Printer1’s IP address always remains the same. What should you create on Server2?（）Aan exclusion range Ba reservation Ca superscope Da user class
单选题our company has four DNS servers that run windows 2008. Each server has a static ip address. You need to prevent dhcp from assigning the addresses of the DNS servers to DHCP clients. What should you do?（）ACreate a new scope for the DNS servers.BCreate a reservation for the DHCP serve.CConfigure the 005 name servers scope option.DConfigure an exclusion that contains the ip addresses of the four DNS servers.
单选题Your network contains two DHCP servers. The DHCP servers are named DHCP1 and DHCP2. The internal network contains 1，000 DHCP client computers that are located on a single subnet. A routerseparates the internal network from the Internet. The router has a single IP address on the internal interface. DHCP1 has the following scope information. èStarting IP address： 172.16.0.1 èEnding IP address： 172.16.7.255 èSubnet mask： 255.255.240.0 You need to provide a fault-tolerant DHCP infrastructure that supports the client computers on the internal network. In the event that a DHCP server fails， all client computers must be able to obtain a valid IP address. How should you configure DHCP2？（）ACreate a scope for the subnet 172.16.0.0/20. Configure the scope to use a starting IP address of 172.16.8.1 and an ending IP address of 172.16.15.254.BCreate a scope for the subnet 172.16.0.0/21. Configure the scope to use a starting IP address of 172.16.0.1 and an ending IP address of 172.16.15.254.CCreate a scope for the subnet 172.16.8.0/21. Configure the scope to use a starting IP address of 172.16.8.1 and an ending IP address of 172.16.10.254.DCreate a scope for the subnet 172.17.0.0/16. Configure the scope to use a starting IP address of 172.17.0.1 and an ending IP address of 172.17.255.254.
单选题You are designing a DHCP solution to meet the business and technical requirements. What should you do?（）AIncrease the default lease time on all DHCP servers.BSplit all address ranges across multiple DHCP servers.CConfigure duplicate scopes on at least two DHCP servers. DForce client computers to obtain an IP address from Automatic Private IP Addressing (APIPA).
单选题Your company has an Active Directory forest. The corporate network uses DHCP to configure client computer IP addresses. The DHCP server has a DHCP client reservation for a portable computer named WKS1. You install asecond DHCP server on the network. You need to ensure that WKS1 receives the DHCP reservation from the DHCP service. What should you do？（）ARun the ipconfig /renew command on WKS1.BRun the netsh add helper command on WKS1.CAdd the DHCP reservation for WKS1 to the second DHCP server.DAdd both DHCP servers to the RAS and IAS Servers group in the Active Directory domain.
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two servers named Server1 and Server2. Server1 is configured as a DHCP server and has a scope that contains addresses 192.168.2.51 to 192.168.2.125. You have a reservation for a print device named Printer1. The reservation assigns the IP address of 192.168.2.100. You install DHCP on Server2 and create a scope that contains addresses 192.168.2.126 to 192.168.2.200. You need to ensure that Printer1s IP address always remains the same. What should you create on Server2?（）Aan exclusion rangeBa reservationCa superscopeDa user class
单选题Your company has four DNS servers that run Windows Server 2008. Each server has a static IP address. You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients. What should you do？ （）A Create a new scope for the DNS servers.B Create a reservation for the DHCP serverC Configure the 005 Name Servers scope optionD Configure an exclusion that contains the IP addresses of the four DNS servers
单选题Your network contains two Exchange Server 2010 Edge Transport servers. The network also contains five Hub Transport servers in two Active Directory sites. All e-mail sent to the network is received by the Edge Transport servers. You plan to configure anti-spam filtering. You need to ensure that the anti-spam filtering configurations are applied to both Edge Transport servers. The solution must use a minimum amount of administrative effort. What should you do？（）AConfigure EdgeSync synchronization.BImplement Active Directory Federation Services （AD FS）.CJoin both Edge Transport servers to an Active Directory domain and then create a forest trust from the internal forest.DManually configure settings on one Edge Transport server and then export the settings to the othe rEdge Transport server.
单选题Your network contains two DHCP servers named Server1 and Server2. Server1 and Server2 are located in the same subnet.You configure a split scope named Scope1 on the DHCP servers.You need to ensure that Server2 only responds to DHCP client requests if Server1 is unavailable.What should you modify？（）Athe Scope1 properties for Server1Bthe Scope1 properties for Server2Cthe server options for Server1Dthe server options for Server2
单选题Your network consists of a single Active Directory domain. Your main office has an Internet connection. Your company plans to open a branch office. The branch office will connect to the main office by using a WAN link. The WAN link will have limited bandwidth. The branch office will not have access to the Internet. The branch office will contain 30 Windows Server 2008 R2 servers. You need to plan the deployment of the servers in the branch office. The deployment must meet the following requirements： èInstallations must be automated. èComputers must be automatically activated. èNetwork traffic between the offices must be minimized. What should you include in your plan？（）AIn the branch office，implement Key Management Service（KMS），a DHCP server，andWindowsDeployment Services （WDS）.BUse Multiple Activation Key （MAK） Independent Activation on the servers. In the main office，implement a DHCP server and Windows Deployment Services（WDS）.CIn the main office，implement Windows Deployment Services（WDS）. In the branch office，implement a The safer ，easier way to help you pass any IT exams.DHCP server and implement the Key Management Service（KMS）.DUse Multiple Activation Key（MAK） Independent Activation on the servers. In the main office，implement a DHCP server. In the branch office implement Windows Deployment Services（WDS）.