单选题Best practices would have no single point of failure between mirrored resources. In setting up virtual, internal boot disks for two client LPARs, how would this be accomplished?（）AHave one VIO server with striped disks for all LPARsBHave one VIO server with mirrored disks for all LPARsCHave two VIO servers with each LPAR accessing both VIO serversDHave two VIO servers with each LPAR accessing a different VIO server
单选题
Best practices would have no single point of failure between mirrored resources. In setting up virtual, internal boot disks for two client LPARs, how would this be accomplished?（）
A
Have one VIO server with striped disks for all LPARs
B
Have one VIO server with mirrored disks for all LPARs
C
Have two VIO servers with each LPAR accessing both VIO servers
D
Have two VIO servers with each LPAR accessing a different VIO server
参考解析
解析：
暂无解析
相关考题：
An administrator setting up software RAID 1 on a Windows Server with two volumes for two separate hard drives, but the option for mirrored is grayed out. Which of the following is the likely reason why this is occurring?（）A. The disks have been setup as basic.B. The page file must be at least 4GB to support mirrored drives.C. The disks have been setup as dynamic.D. Windows does not support software RAID 1.
A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server.Which limitation must be considered when planning the system configuration?（）A.A VIO server requires a dedicated LHEA port.B.There is a limit of 32 LPARs per virtual LAN.C.Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.D.Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.
A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down. Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）A、ImplementPowerHA SystemMirror on both VIO servers.B、ConfigureEtherchannel between the client LPARs and the two VIO serversC、Configure Network Interface Backup between the two VIO servers and use each VIO server to access the network.D、Implement Shared Ethernet Adapter failover and have all client partitions access the network through the shared adapters.
Companycom will be using Virtual IO Server to share Ethernet adapters. What can be done to prevent network failure of the client if a Virtual IO Server goes down?（）A、Create two virtual adapters on the client， each one from a separate Virtual IO ServerB、Enable dead gateway detection on the client so that the network traffic can be reroutedC、Have a spare network card on standby in the client in case the Virtual IO Server goes downD、Create an etherchannel adapter on the client using one Virtual Ethernet adapter from two separate Virtual IO Servers
An administrator setting up software RAID 1 on a Windows Server with two volumes for twoseparate hard drives， but the option for mirrored is grayed out. Which of the following is the MOST likely reason why this is occurring？（）A、The disks have been setup as basic.B、The page file must be at least 4GB to support mirrored drives.C、The disks have been setup as dynamic.D、Windows does not support software RAID 1.
At a minimum how many NICs must a machine have to host virtual machines？（）A、 One NIC will support all virtual machinesB、 One for each virtual machine and one for managementC、 Three for each virtual machineD、 Two for each virtual machine and one for management
While using virtualization to share SAN adapters on a server, how does Node Port ID Virtualization (NPIV) differ from Virtual SCSI (vSCSI) related to the use of multipathing software?（）A、NPIV and vSCSI both require multipathing in VIO Server only. B、NPIV requires multipathing software on client LPARs, vSCSI requires multipathing software on VIO Server. C、NPIV requires multipathing software on VIO Server, vSCSI requires multipathing software on client LPARs. D、NPIV requires multipathing and MPIO software on VIO Server LPARs, vSCSI requires multipathing software on VIO Server and MPIO on client LPARs.
Which of the following would be the FIRST step to configure a Virtual I/O Server（VIOS）？（）A、Boot the HMC with the VIOS media.B、Assign SAN-attached disks to the database partitions.C、Create logical volumes for the VIOS on rootvg disks.D、Identify the location of the internal SCSI disks for the VIOS.
Companycom has five LPARs, but only one CD drive. How should the CD drive be shared among all the users without system administrator action?（）A、Allocate the CD to the VIO Server and NFS export the CD to the user LPARsB、Allocate the CD to one of the user LPARs and config the VIO Server to NFS import itC、Allocate the CD to the VIO Server and the LPARs will share it as a Virtual SCSI deviceD、Allocate the CD to one of the user LPARs and NFS export it to the remaining user LPARs
Best practices would have no single point of failure between mirrored resources. In setting up virtual, internal boot disks for two client LPARs, how would this be accomplished?（）A、Have one VIO server with striped disks for all LPARsB、Have one VIO server with mirrored disks for all LPARsC、Have two VIO servers with each LPAR accessing both VIO serversD、Have two VIO servers with each LPAR accessing a different VIO server
A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down. Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）A、Implement PowerHA SystemMirror on both VIO servers.B、Configure Etherchannel between the client LPARs and the two VIO serversC、Configure Network Interface Backup between the two VIO servers and use each VIO server to access the network.D、Implement Shared Ethernet Adapter failover and have all client partitions access the network through the shared adapters.
A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server. Which limitation must be considered when planning the system configuration?（）A、A VIO server requires a dedicated LHEA port.B、There is a limit of 32 LPARs per virtual LAN.C、Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.D、Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.
You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com.All servers on the ABC.com network have Windows Server 2012 R2 installed.ABC.com has a server， named ABC-SR07， which has two physical disks installed.The C:// drive hosts the boot partition， while the D:// drive is not being used. Both disks are online. You have received instructions to create a virtual machine on ABC-SR07. Subsequent to creating the virtual machine， you have to connect the D:// drive to the virtual machine. Which of the following is TRUE with regards to connecting a physical disk to a virtual machine？（）A、The physical disk should not be online.B、The physical disk should be uninstalled and re-installed.C、The physical disk should be configured as a striped disk.D、The physical disk should be configured as a mirrored disk.
You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. All servers on the ENSUREPASS.com network have Windows Server 2012 R2 installed.ENSUREPASS.com has a server， named ENSUREPASS-SR07， which has two physical disks installed. The C:// drive hosts the boot partition， while the D:// drive is not being used. Both disks are online. You have received instructions to create a virtual machine on ENSUREPASS-SR07. Subsequentto creating the virtual machine， you have to connect the D:// drive to the virtual machine. Which of the following is TRUE with regards to connecting a physical disk to a virtual machine？（）A、The physical disk should not be onlineB、The physical disk should be uninstalled and re-installedC、The physical disk should be configured as a striped diskD、The physical disk should be configured as a mirrored disk
You work as the Exchange administrator at Company.com.The Company.com network contains an Exchange Server 2010 Organization.Company.com has its headquarters in Paris where you are located.you are responsible for managing two exchange servers named -ex01 and -ex02.both exchange servers are configured to host the client access server role， the hub transport server role as well as the mailbox server role.terstkingex01 and -ex02 are members of a database availability group.during the course of the week you receive an instruction from management to ensure that users are able to make a connection to the client access server in the event of a single server failure. What should you do？（）A、Your best option would be to have the Network Load Balancing feature installed on every server.Thereafter a second IP address should be assigned to every network adapter.B、Your best option would be to have two new records created for the Client Access server from the DNS manager.C、Your best option would be to have a hardware load balancer deployed. Then a DNS record should be created for the virtual IP address. Thereafter a Client Access server array should be configured.D、Your best option would e to have a new service named Client Access Server created and a new IP address allocated from the Failover Cluster Manager.
Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）A、The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. B、The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. C、The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. D、The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.
单选题You work as the Exchange administrator at Company.com.The Company.com network contains an Exchange Server 2010 Organization.Company.com has its headquarters in Paris where you are located.you are responsible for managing two exchange servers named -ex01 and -ex02.both exchange servers are configured to host the client access server role， the hub transport server role as well as the mailbox server role.terstkingex01 and -ex02 are members of a database availability group.during the course of the week you receive an instruction from management to ensure that users are able to make a connection to the client access server in the event of a single server failure. What should you do？（）AYour best option would be to have the Network Load Balancing feature installed on every server.Thereafter a second IP address should be assigned to every network adapter.BYour best option would be to have two new records created for the Client Access server from the DNS manager.CYour best option would be to have a hardware load balancer deployed. Then a DNS record should be created for the virtual IP address. Thereafter a Client Access server array should be configured.DYour best option would e to have a new service named Client Access Server created and a new IP address allocated from the Failover Cluster Manager.
单选题An administrator setting up software RAID 1 on a Windows Server with two volumes for twoseparate hard drives， but the option for mirrored is grayed out. Which of the following is the MOST likely reason why this is occurring？（）AThe disks have been setup as basic.BThe page file must be at least 4GB to support mirrored drives.CThe disks have been setup as dynamic.DWindows does not support software RAID 1.
单选题A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down. Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）AImplement PowerHA SystemMirror on both VIO servers.BConfigure Etherchannel between the client LPARs and the two VIO servers.CConfigure Network Interface Backup between the two VIO servers and use each VIO server to access the network.DImplement Shared Ethernet Adapter failover and have all client partitions access the network through the shared adapters.
单选题You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. All servers on the ENSUREPASS.com network have Windows Server 2012 R2 installed.ENSUREPASS.com has a server， named ENSUREPASS-SR07， which has two physical disks installed. The C:// drive hosts the boot partition， while the D:// drive is not being used. Both disks are online. You have received instructions to create a virtual machine on ENSUREPASS-SR07. Subsequentto creating the virtual machine， you have to connect the D:// drive to the virtual machine. Which of the following is TRUE with regards to connecting a physical disk to a virtual machine？（）AThe physical disk should not be onlineBThe physical disk should be uninstalled and re-installedCThe physical disk should be configured as a striped diskDThe physical disk should be configured as a mirrored disk
单选题A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server. Which limitation must be considered when planning the system configuration?（）AA VIO server requires a dedicated LHEA port.BThere is a limit of 32 LPARs per virtual LAN.CTwo VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.DTwo VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.
单选题A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down. Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）AImplementPowerHA SystemMirror on both VIO servers.BConfigureEtherchannel between the client LPARs and the two VIO serversCConfigure Network Interface Backup between the two VIO servers and use each VIO server to access the network.DImplement Shared Ethernet Adapter failover and have all client partitions access the network through the shared adapters.
单选题At a minimum how many NICs must a machine have to host virtual machines？（）A One NIC will support all virtual machinesB One for each virtual machine and one for managementC Three for each virtual machineD Two for each virtual machine and one for management
单选题You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com.All servers on the ABC.com network have Windows Server 2012 R2 installed.ABC.com has a server， named ABC-SR07， which has two physical disks installed.The C:// drive hosts the boot partition， while the D:// drive is not being used. Both disks are online. You have received instructions to create a virtual machine on ABC-SR07. Subsequent to creating the virtual machine， you have to connect the D:// drive to the virtual machine. Which of the following is TRUE with regards to connecting a physical disk to a virtual machine？（）AThe physical disk should not be online.BThe physical disk should be uninstalled and re-installed.CThe physical disk should be configured as a striped disk.DThe physical disk should be configured as a mirrored disk.
单选题An administrator setting up software RAID 1 on a Windows Server with two volumes for two separate hard drives, but the option for mirrored is grayed out. Which of the following is the likely reason why this is occurring?（）AThe disks have been setup as basic.BThe page file must be at least 4GB to support mirrored drives.CThe disks have been setup as dynamic.DWindows does not support software RAID 1.
单选题While using virtualization to share SAN adapters on a server, how does Node Port ID Virtualization (NPIV) differ from Virtual SCSI (vSCSI) related to the use of multipathing software?（）ANPIV andvSCSI both require multipathing in VIO Server only.BNPIV requiresmultipathing software on client LPARs, vSCSI requires multipathing software on VIO Server.CNPIV requiresmultipathing software on VIO Server, vSCSI requires multipathing software on client LPARs.DNPIV requiresmultipathing and MPIO software on VIO Server LPARs, vSCSI requires multipathing software on VIO Server and MPIO on client LPARs.
单选题Companycom has five LPARs, but only one CD drive. How should the CD drive be shared among all the users without system administrator action?（）AAllocate the CD to the VIO Server and NFS export the CD to the user LPARsBAllocate the CD to one of the user LPARs and config the VIO Server to NFS import itCAllocate the CD to the VIO Server and the LPARs will share it as a Virtual SCSI deviceDAllocate the CD to one of the user LPARs and NFS export it to the remaining user LPARs