单选题The ip pim autorp listener command is used to do which of these？（）Aenable a Cisco router to passively listen to Auto-RP packets without the router actively sending or forwarding any of the packetsBallow Auto-RP packets in groups 224.0.1.39 and 224.0.1.40 to be flooded in dense mode out interfaces configured with the ip pim sparse-mode commandCenable the use of Auto-RP on a routerDconfigure the router as an Auto-RP mapping agent
单选题
The ip pim autorp listener command is used to do which of these？（）
A
enable a Cisco router to passively listen to Auto-RP packets without the router actively sending or forwarding any of the packets
B
allow Auto-RP packets in groups 224.0.1.39 and 224.0.1.40 to be flooded in dense mode out interfaces configured with the ip pim sparse-mode command
C
enable the use of Auto-RP on a router
D
configure the router as an Auto-RP mapping agent
参考解析
解析：
暂无解析
相关考题：
When building an IP multicast domain using PIM which mode assumes that other routers do not want to forward multicast packets for the group?() A. PIM - DMB. PIM - SMC. PIM - RPD. CGMPE. IGMP snooping
The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?() A. The default administrative distance is used.B. The command is used to establish a static route.C. The command is used to configure the router interfaces.D. The command is used to establish a stub network.E. The subnet mask for the source address is 255.255.255.0
Which command is used to debug a ping command?() A.debug icmpB.debug ip icmpC.debug tcpD.debug packet
Which command is used to see the path taken by packets across an IP network?() A.show ip routeB.show routeC.tracerouteD.trace ip route
Which command is used to enable SSM with the range 232.0.0.0 - 255.0.0.0？（）A、ip pim ssmB、ip pim ssm 232.0.0.0 255.0.0.0C、ip pim ssm range 50D、access-list 50 permit 232.0.0.0 15.255.255.255E、ip pim enable default
The following configuration command was issued on router TK1:ip route 172.16.3.0 255.255.255.0 192.168.2.1.Which of the following statements are true regarding this command?（）A、The command is used to establish a static route.B、The default administrative distance is used.C、The command is used to configure the default route.D、The subnet mask for the source address is 255.255.255.0E、The command is used to establish a stub network
Which command can be used to check the assignment of RPs to multicast groups？（）A、show ip pim rendez-vousB、show ip rpf rp mappingC、show ip pim rp mappingD、show ip pim rp infoE、show ip pim
When building an IP multicast domain using PIM which mode assumes that other routers do not want to forward multicast packets for the group?（）A、PIM - DMB、PIM - SMC、PIM - RPD、CGMPE、IGMP snooping
Which of the following statements are true concerning the command ip sla monitor responder typetcpconnect ipaddress 10.1.1.1 port 23？（Choose all that apply.）（）A、The command will initiate a probe with a destination IP address of 10.1.1.1B、The command is used on the IP SLA responder and the IP SLA sourceC、The command will allow only source address 10.1.1.1 to source probesD、The command will initiate a probe with a destination Telnet portE、The command is used to make the router a responderF、The command will initiate a probe with a source port of 23
Which statement about the ip classless router command is true?（）A、The ip classless command is enabled by default in recent versions of IOS.B、The ip classless command should only be enabled when static routing is being used instead of a routing protocol.C、The ip classless command should be enabled by the network administrator whenever RIPv1 or IGRP is being used.D、The ip classless command should be enabled by the network administrator whenever OSPF, RIPv2, or EIGRP is being used.
Which command is used to display the collection of OSPF link states？（）A、show ip ospf lsa database（not A）B、show ip ospf link-stateC、show ip ospf neighborsD、show ip ospf database
Which two commands are required to enable multicast on a router， knowing that the receivers only support IGMPv2？（）A、ip pim rp-addressB、ip pim ssmC、ip pim sparse-modeD、ip pim passive
Which command is used to see the path taken by packets across an IP network?（）A、show ip routeB、show routeC、tracerouteD、trace ip route
The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）A、The default administrative distance is used.B、The command is used to establish a static route.C、The command is used to configure the router interfaces.D、The command is used to establish a stub network.E、The subnet mask for the source address is 255.255.255.0
Which of the following command line tools can be used to display the default gateway, IP address,and DNS servers currently being used by a host?（）A、TRACERTB、IPCONFIG/ALLC、NSLOOKUPD、PING-T
You are maintaining the database of a company. The listener process， listener1， is configured for remote access. You have issued the following command： LSNRCTLSTATUS listener1 Which information will NOT be displayed when you issue the above command？（） A、 whether the password is set in the listener or a file or notB、 the number of client connections the service handler has refusedC、 the information will be displayed whether the instance can accept connections or notD、 the protocol addresses on which the listener is configured to listen
多选题The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）AThe default administrative distance is used.BThe command is used to establish a static route.CThe command is used to configure the router interfaces.DThe command is used to establish a stub network.EThe subnet mask for the source address is 255.255.255.0
单选题Which command is used to debug a ping command?（）Adebug icmpBdebug ip icmpCdebug tcpDdebug packet
单选题Which command can be used to check the assignment of RPs to multicast groups？（）Ashow ip pim rendez-vousBshow ip rpf rp mappingCshow ip pim rp mappingDshow ip pim rp infoEshow ip pim
多选题Which are correct descriptions and configurations of Anycast RP？（）AIn Anycast RP， two or more RPs are configured with the same IP address on loopback interfaces.BAnycast RP provides redundancy and load-sharing capabilities.CRouters with Anycast RP can be configured statically （loopback 1.1.1.1）with the command ip pim rp-address 1.1.1.1DRouters with Anycast RP can be configured statically （loopback 1.1.1.1）with the command ip rp-address pim 1.1.1.1ERouters with Anycast RP can be configured statically （loopback 1.1.1.1）with the command ip anycast-rp pim 1.1.1.1
多选题Which of the following statements are true concerning the command ip sla monitor responder typetcpconnect ipaddress 10.1.1.1 port 23？（Choose all that apply.）（）AThe command will initiate a probe with a destination IP address of 10.1.1.1BThe command is used on the IP SLA responder and the IP SLA sourceCThe command will allow only source address 10.1.1.1 to source probesDThe command will initiate a probe with a destination Telnet portEThe command is used to make the router a responderFThe command will initiate a probe with a source port of 23
单选题Which Cisco IOS command is used to troubleshoot a problem in which a BGP session stays in the active state?（）Adebug ip bgp updatesBdebug ip tcp eventsCdebug ip bgp transactionsDdebug ip tcp transactions
单选题Which command is used to display the collection of OSPF link states?（）Ashow ip ospf lsa databaseBshow ip ospf link-stateCshow ip ospf neighborsDshow ip ospf database
单选题Which command is used to enable SSM with the range 232.0.0.0 - 255.0.0.0？（）Aip pim ssmBip pim ssm 232.0.0.0 255.0.0.0Cip pim ssm range 50Daccess-list 50 permit 232.0.0.0 15.255.255.255Eip pim enable default
单选题Which statement about the ip classless router command is true?（）AThe ip classless command is enabled by default in recent versions of IOS.BThe ip classless command should only be enabled when static routing is being used instead of a routing protocol.CThe ip classless command should be enabled by the network administrator whenever RIPv1 or IGRP is being used.DThe ip classless command should be enabled by the network administrator whenever OSPF, RIPv2, or EIGRP is being used.
多选题The following configuration command was issued on router TK1:ip route 172.16.3.0 255.255.255.0 192.168.2.1.Which of the following statements are true regarding this command?（）AThe command is used to establish a static route.BThe default administrative distance is used.CThe command is used to configure the default route.DThe subnet mask for the source address is 255.255.255.0EThe command is used to establish a stub network
单选题Which modifier is used to change listener parameters in the Listener Control utility environment？（）ASETBALTERCCHANGEDUPDATE