多选题Which are valid modes for a switch port used as a VLAN trunk? (Choose three.)（）AtransparentBautoConDdesirableEblockingFforwarding
多选题
Which are valid modes for a switch port used as a VLAN trunk? (Choose three.)（）
A
transparent
B
auto
C
on
D
desirable
E
blocking
F
forwarding
参考解析
解析：
暂无解析
相关考题：
When a switch port is used as a VLAN trunk, which of the following trunk modes are valid? (Select all that apply.)A. BlockingB. AutoC. DesirableD. OnE. TransparentF. Learning
You need to configure an 802.1Q link on a Ezonexam switch. Which commands, when used together, would do this? (Select two answer choices)A. Switch(vlan) mode trunkB. Switch(config) switchport access mode trunkC. Switch(config-if) switchport mode trunkD. Switch(config-if) switchport trunk encapsulation dot1qE. Switch(config) switchport access mode 1F. Switch(vlan) trunk encapsulation dot1q
Which commands, when used together, would create an 802.1Q link?() A. Switch(vlan)# mode trunkB. Switch(config)# switchport access mode trunkC. Switch(config-if)# switchport mode trunkD. Switch(config-if)# switchport trunk encapsulation dot1qE. Switch(config)# switchport access mode 1F. Switch(vlan)# trunk encapsulation dot1q
Which are valid modes for a switch port used as a VLAN trunk? () A.transparentB.autoC.onD.desirable
Which three statements about VTP features are true?() A.When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistenciesB.Each broadcast domain on a switch can have its own unique VTP domainC.VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.D.When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.E.VTP pruning is used to increase available bandwidth in trunk linksF.Client,server,and transparent are valid VTP modesG. To configure a switch to be part of two VTP domains,each domain must have its own passwords
Which are valid modes for a switch port used as a VLAN trunk (Choose three.)()。 A.transparentB.autoC.onD.desirableE.blockingF.forwarding
Which commands, when used together, would create an 802.1Q link?（）A、Switch(vlan)# mode trunkB、Switch(config)# switchport access mode trunkC、Switch(config-if)# switchport mode trunkD、Switch(config-if)# switchport trunk encapsulation dot1qE、Switch(config)# switchport access mode 1F、Switch(vlan)# trunk encapsulation dot1q
Which two of the following statements describe a routed switch port on a multilayer switch？（）A、Layer 2 switching and Layer 3 routing are mutually supported.B、The port will not be associated with any VLAN.C、The routed switch port supports VLAN subinterfaces.D、The routed switch port is used when a switch has only one port per VLAN or subnet.E、The routed switch port ensures that STP remains in the forwarding state.
Which are valid modes for a switch port used as a VLAN trunk (Choose three.)（）。A、transparentB、autoC、onD、desirableE、blockingF、forwarding
中兴ZXCTN设备在进行初始化时，以下哪个选项命令是不属于MCC监控命令的脚本（）A、snmp-server packetsize 8192B、interface vlan 3001；ip address 139.9.1.6255.255.255.252；exitC、vlan3001；exitD、interface xgei_9/1；mcc-vlanid3001；switchport mode trunk；switch port trunk vlan 3001；switch port trunk native vlan 3001；exit
An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location？ （）A、The switch must be configured with an IP address,subnet mask,and default gateway.B、The switch must be connected to a router over a VLAN trunk.C、The switch must be reachable through a port connected to its management VLAN.D、The switch console port must be connected to the Ethernet LAN.E、The switch management VLAN must be created and have a membership of at least one switch port.F、The switch must be fully configured as an SNMP agent.
A Cisco switch has this configuration for a port channel connecting to an ESXi using dual NICs and is intended for use with an N1Kv. Interface fastethernet 1/10 Switchport mode trunk Switchport trunk allowed vlan all Channel-group 10 mode on No shut Interface fastethernet 1/11 Switchport mode trunk Switchport trunk allowed vlan all Channel-group 10 mode on No shut Interface port-channel 10 Switchport mode trunk Switchport allowed vlan all No shut Which Port Channel configuration must be used on the Nexus 1000v port-profile？（）A、 MAC pinningB、 Cisco Discovery Protocol pinningC、 Mode OnD、 Mode ActiveE、 No port channel configuration
Which command alone will disable trunking on a Layer 2 switch port？（）A、no switchport trunk native vlan vlan-idB、switchport nonegotiateC、no switchport mode dynamic desirableD、switchport mode access
An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）A、The switch must be configured with an IP address, subnet mask, and default gateway.B、The switch must be connected to a router over a VLAN trunk.C、The switch must be reachable through a port connected to its management VLAN.D、The switch console port must be connected to the Ethernet LAN.E、The switch management VLAN must be created and have a membership of at least one switch
Which are valid modes for a switch port used as a VLAN trunk?（）A、transparentB、autoC、onD、desirableE、blockingF、forwarding
A switch port on TK1 is being configured to support 802.1Q trunking. Which of the following are true about 802.1Q trunking？（）A、Both switches must be in the same VTP domain.B、The encapsulation type of both ends of the trunk does not have to match.C、The native VLAN on both ends of the trunk must be VLAN 1.D、802.1Q trunking can only be configured on a Layer 2 port.E、In 802.1Q trunking， all VLAN packets are tagged on the trunk link， except the native VLAN.
When a switch port is used as a VLAN trunk, which of the following trunk modes are valid?（）A、BlockingB、AutoC、DesirableD、OnE、TransparentF、Learning
Which are valid modes for a switch port used as a VLAN trunk? （）A、transparentB、autoC、onD、desirable
If you were to set up a VLAN trunk over a Fast Ethernet link on switch R1， which trunk mode would you set the local port to on R1 if you wanted it to respond to requests from its link partner （R2） and become a trunk？ （）A、 AutoB、 NegotiateC、 DesignateD、 No negotiate
多选题Which two commands can be used to verify a trunk link configuration status on a given cisco switch?（）Ashow interfaces interfaceBshow interfaces trunkCshow interfaces switchportDshow ip interface briefEshow interfaces vlan
单选题If you were to set up a VLAN trunk over a Fast Ethernet link on switch R1， which trunk mode would you set the local port to on R1 if you wanted it to respond to requests from its link partner （R2） and become a trunk？ （）A AutoB NegotiateC DesignateD No negotiate
多选题When a switch port is used as a VLAN trunk, which of the following trunk modes are valid?（）ABlockingBAutoCDesirableDOnETransparentFLearning
多选题Which three statements about VTP features are true?（）AWhen properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistenciesBEach broadcast domain on a switch can have its own unique VTP domainCVTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.DWhen properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.EVTP pruning is used to increase available bandwidth in trunk linksFClient,server,and transparent are valid VTP modesGTo configure a switch to be part of two VTP domains,each domain must have its own passwords
多选题An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location？ （）AThe switch must be configured with an IP address,subnet mask,and default gateway.BThe switch must be connected to a router over a VLAN trunk.CThe switch must be reachable through a port connected to its management VLAN.DThe switch console port must be connected to the Ethernet LAN.EThe switch management VLAN must be created and have a membership of at least one switch port.FThe switch must be fully configured as an SNMP agent.
多选题An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）AThe switch must be configured with an IP address, subnet mask, and default gateway.BThe switch must be connected to a router over a VLAN trunk.CThe switch must be reachable through a port connected to its management VLAN.DThe switch console port must be connected to the Ethernet LAN.EThe switch management VLAN must be created and have a membership of at least one switch
单选题Which command alone will disable trunking on a Layer 2 switch port？（）Ano switchport trunk native vlan vlan-idBswitchport nonegotiateCno switchport mode dynamic desirableDswitchport mode access
多选题Which two of the following statements describe a routed switch port on a multilayer switch？（）ALayer 2 switching and Layer 3 routing are mutually supported.BThe port will not be associated with any VLAN.CThe routed switch port supports VLAN subinterfaces.DThe routed switch port is used when a switch has only one port per VLAN or subnet.EThe routed switch port ensures that STP remains in the forwarding state.