The internetwork infrastructure of company XYZ consists of a single OSPF area as shown in the graphic. There is concern that a lack of router resources is impeding internetwork performance. As part of examining the router resources, the OSPF DRs need to be known. All the router OSPF priorities are at the default and the router IDs are shown with each router. Which routers are likely to have been elected as DR?（）A.Corp-1B.Corp-2C.Corp-3D.Corp-4E.Branch-1F.Branch-2
The internetwork infrastructure of company XYZ consists of a single OSPF area as shown in the graphic. There is concern that a lack of router resources is impeding internetwork performance. As part of examining the router resources, the OSPF DRs need to be known. All the router OSPF priorities are at the default and the router IDs are shown with each router. Which routers are likely to have been elected as DR?（）
A.Corp-1
B.Corp-2
C.Corp-3
D.Corp-4
E.Branch-1
F.Branch-2
相关考题：
●A local area network(LAN)is the communication of a number of computers by (66) connecting to each one in a single location,usually a single floor of a building or all the computers in a small company.(66) A．lineB．cableC．copperD．copper cash
A local area network(LAN)is the communication of a number of computers by(66)connecting to each one in a single location, usually a single floor of a building or all the computers in a small company.A．lineB．cableC．copperD．copper cash
Which of the following are characteristics of OSPF areas?() A. Hierarchical OSPF networks need to be in one areaB. Multiple OSPF areas must connect to area 0C. Single area OSPF networks must be configured in area 1D. Areas can be assigned any number from 0 to 63535E. Area 0 is called the backbone areaF. Each OSPF area need to be configured with a loopback interface
Refer to the diagram. Which OSPF configuration command is required to configure Area 3 a s atotally stubby area?() A. On the ABR router ospf 10 area 3 stubB. On all Area 3 routers router ospf 10 area 3 stubC. On all Area 3 routers router ospf 10 area 3 stub no - summaryD. On the ABR router ospf 10 area 3 nssaE. On the ABR rou ter ospf 10 area 3 stub no - summary
OSPF routing uses the concept of areas. What are the characteristics of OSPF areas?() A. Each OSPF area requires a loopback interface to be configured.B. Areas may be assigned any number from 0 to 65535.C. Area 0 is called the backbone area.D. Hierarchical OSPF networks do not require multiple areas.E. Multiple OSPF areas must connect to area 0.F. Single area OSPF networks must be configured in area 1.
The EIGRP configuration in the Glencoe router uses a single network statement.From the output shown in the graph would advertise these networks in EIGRP?() A.network 172.26.168.0 area 478B.network 172.26.0.0C.network 172.26.168.128 0.0.0.127D.network 172.26.168.128 area 478
下面哪条命令不能使区域内路由器RTA某接口使能ospf() A.[RTA-Serial0]ospf enable area 1B.[RTA-Ethernet0]ospf enable area 1C.[RTA-Serial0]ospf en area 2D.[RTA]ospf enable area 2
Which description regarding OSPF Network LSAs is correct?（）A、They are originated by Area Border Router and are sent into a single area to advertise an Autonomous System Border Router.B、They are originat ed by Area Border Routers and are sent into a single area to advertise destinations outside that area.C、They are originated by the DR on every multi - access network. They include all attached routers including the DR itself.D、They are originated by every router in the OPSF network. They include all routers on the link, interfaces, the cost of the link, and any known neighbor on the link.
OSPF routing uses the concept of areas. What are the characteristics of OSPF areas?（）A、Each OSPF area requires a loopback interface to be configured.B、Areas may be assigned any number from 0 to 65535.C、Area 0 is called the backbone area.D、Hierarchical OSPF networks do not require multiple areas.E、Multiple OSPF areas must connect to area 0.F、Single area OSPF networks must be configured in area 1.
What are two benefits of using a single OSPF area network design?（）A、it reduces the number of required OSPF neighbor adjacenciesB、It reduces the types of LSAs that are generatedC、It is less CPU intensive for routers in the single areaD、It increases LSA response times.E、It removes the need for virtual links
Which of the following are true statements regarding the characteristics of OSPF areas? Select all that apply.（）A、All OSPF networks require the use of multiple areasB、Multiple OSPF areas must connect to area 0C、Single area OSPF networks must be configured in area 1D、Areas can be assigned any number from 0 to 63535E、Area 0 is called the backbone areaF、Each OSPF area need to be configured with a loopback interface
You want to suppress advertisement of all routes within the 200.200.0.0/16 range to your OSPFneighbors in other areas. Which configuration accomplishes this goal?（）A、[edit protocols ospf area area-id] area-range 200.200.0.0/16 discard;B、[edit protocols ospf area area-id] area-range 200.200.0.0/16 restrict;C、[edit protocols ospf area area-id] area-range 200.200.0.0/16 no-summary;D、[edit protocols ospf area area-id] area-range 200.200.0.0/16 suppress;
在VRP操作系统中，如何进入OSPF区域0视图（）.A、[Quidway]ospf area 0B、[Quidway-ospf-1]area 0C、[Quidway-ospf-1]area 0.0.0.0D、[Quidway-ospf-1]area 0 enable
Which of the following are characteristics of OSPF areas?（）A、Hierarchical OSPF networks need to be in one areaB、Multiple OSPF areas must connect to area 0C、Single area OSPF networks must be configured in area 1D、Areas can be assigned any number from 0 to 63535E、Area 0 is called the backbone areaF、Each OSPF area need to be configured with a loopback interface
A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem? （）Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0A、The process id is configured improperlyB、The OSPF area is configured improperlyC、The network wildcard mask is configured improperlyD、The network number is configured improperlyE、The AS is configured improperlyF、The network subnet mask is configuerd improperly
什么命令序列将配置一个路由器运行OSPF，并添加网络10.1.1.0/24 area0？（）A、router ospf area 0 network 10.1.1.0 255.255.255.0 area 0B、router ospf network 10.1.1.0 0.0.0.255C、router ospf 1 network 10.1.1.0 0.0.0.255 area 0D、router ospf area 0 network 10.1.1.0 0.0.0.255 area 0E、router ospf network 10.1.1.0 255.255.255.0 area 0F、router ospf 1 network 10.1.1.0 0.0.0.255
You want to suppress advertisement of all routes within the 200.200.0.0/16 range to your OSPF neighbors in other areas. Which configuration accomplishes this goal？（）A、[edit protocols ospf area area-id] area-range200.200.0.0/16 discard；B、[edit protocols ospf area area-id] area-range200.200.0.0/16 restrict；C、[edit protocols ospf area area-id] area-range200.200.0.0/16 no-summary；D、[edit protocols ospf area area-id] area-range200.200.0.0/16 suppress；
You are a network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. The company’s main office is in Barcelona， and it has branch offices in Paris and London. The company has no immediate plans to expand or relocate the offices. The company wants to connect the office networks by using a frame relay WAN connection and Routing and Remote Access servers that are configured with frame relay WAN adapters. Computers in each office will be configured to use the local Routing and Remote Access server as a default gateway. You are planning the routing configuration for the Routing and Remote Access servers. You need to allow computers in Barcelona， Paris， and London to connect to computers in any office. You want to minimize routing traffic on the WAN connection. What should you do？ （）A、 At each office， add the OSPF routing protocol to Routing and Remote Access， add the WAN adapter to the OSPF routing protocol， and deploy OSPF as a single-area internetwork.B、 At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 broadcast and the incoming packet protocol as RIP version 1 and 2.C、 At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 multicast and the incoming packet protocol as RIP version 2 only.D、 At each office， configure the Routing and Remote Access server with static routes to the local networks at the other two offices.
单选题You are a network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. The company’s main office is in Barcelona， and it has branch offices in Paris and London. The company has no immediate plans to expand or relocate the offices. The company wants to connect the office networks by using a frame relay WAN connection and Routing and Remote Access servers that are configured with frame relay WAN adapters. Computers in each office will be configured to use the local Routing and Remote Access server as a default gateway. You are planning the routing configuration for the Routing and Remote Access servers. You need to allow computers in Barcelona， Paris， and London to connect to computers in any office. You want to minimize routing traffic on the WAN connection. What should you do？ （）A At each office， add the OSPF routing protocol to Routing and Remote Access， add the WAN adapter to the OSPF routing protocol， and deploy OSPF as a single-area internetwork.B At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 broadcast and the incoming packet protocol as RIP version 1 and 2.C At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 multicast and the incoming packet protocol as RIP version 2 only.D At each office， configure the Routing and Remote Access server with static routes to the local networks at the other two offices.
多选题What are two benefits of using a single OSPF area network design?（）Ait reduces the number of required OSPF neighbor adjacenciesBIt reduces the types of LSAs that are generatedCIt is less CPU intensive for routers in the single areaDIt increases LSA response times.EIt removes the need for virtual links
单选题Which description regarding OSPF Network LSAs is correct?（）AThey are originated by Area Border Router and are sent into a single area to advertise an Autonomous System Border Router.BThey are originat ed by Area Border Routers and are sent into a single area to advertise destinations outside that area.CThey are originated by the DR on every multi - access network. They include all attached routers including the DR itself.DThey are originated by every router in the OPSF network. They include all routers on the link, interfaces, the cost of the link, and any known neighbor on the link.
多选题Which of the following are characteristics of OSPF areas?（）AHierarchical OSPF networks need to be in one areaBMultiple OSPF areas must connect to area 0CSingle area OSPF networks must be configured in area 1DAreas can be assigned any number from 0 to 63535EArea 0 is called the backbone areaFEach OSPF area need to be configured with a loopback interface
单选题You want to suppress advertisement of all routes within the 200.200.0.0/16 range to your OSPFneighbors in other areas. Which configuration accomplishes this goal?（）A[edit protocols ospf area area-id] area-range 200.200.0.0/16 discard;B[edit protocols ospf area area-id] area-range 200.200.0.0/16 restrict;C[edit protocols ospf area area-id] area-range 200.200.0.0/16 no-summary;D[edit protocols ospf area area-id] area-range 200.200.0.0/16 suppress;
单选题A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?（） Router(config)#router ospf 1 Router(config-router)#network 10.0.0.0 255.0.0.0 area 0AThe process id is configured improperlyBThe OSPF area is configured improperlyCThe network wildcard mask is configured improperlyDThe network number is configured improperlyEThe AS is configured improperlyFThe network subnet mask is configuerd improperly
单选题The EIGRP configuration in the Glencoe router uses a single network statement.From the output shown in the graph would advertise these networks in EIGRP?（）Anetwork 172.26.168.0 area 478Bnetwork 172.26.0.0Cnetwork 172.26.168.128 0.0.0.127Dnetwork 172.26.168.128 area 478
多选题OSPF routing uses the concept of areas. What are the characteristics of OSPF areas?（）AEach OSPF area requires a loopback interface to be configured.BAreas may be assigned any number from 0 to 65535.CArea 0 is called the backbone area.DHierarchical OSPF networks do not require multiple areas.EMultiple OSPF areas must connect to area 0.FSingle area OSPF networks must be configured in area 1.
多选题在VRP操作系统中，如何进入OSPF区域0视图（）.A[Quidway]ospf area 0B[Quidway-ospf-1]area 0C[Quidway-ospf-1]area 0.0.0.0D[Quidway-ospf-1]area 0 enable