The network administrator needs to address seven LANs. RIP version 1 is the only routing protocol in use on the network and subnet 0 is not being used. What is the maximum number of usable IP addresses that can be supported on each LAN if the organization is using one class C address block?（）A.8B.6C.30D.32E.14F.16
The network administrator needs to address seven LANs. RIP version 1 is the only routing protocol in use on the network and subnet 0 is not being used. What is the maximum number of usable IP addresses that can be supported on each LAN if the organization is using one class C address block?（）
A.8
B.6
C.30
D.32
E.14
F.16
相关考题：
A network administrator has configured source NAT, translating to an address that is on a locally connected subnet.The administrator sees the translation working, but traffic does not appear to come back.What is causing the problem?（）A. The host needs to open the telnet port.B. The host needs a route for the translated address.C. The administrator must use a proxy-arp policy for the translated address.D. The administrator must use a security policy, which will allow communication between the zones.
A network administrator is designing a Cisco network for a large company. The network must be able to use minimal bandwidth for routing updates, converge quickly, and support VLSM, CIDR, IP and IPX. Which routing protocol will best fit the requirements of this network?（）A. RIP v1B. RIP v2C. IGRPD. OSPFE. EIGRP
Which dynamic routing protocol should be recommended for the Testking networkshown in the graphic above?() A. OSPFB. RIP version 1C. RIP version 2D. IGRPE. EIGRP
The Testking Network consists of the following 5 IP networks:NETWORK 1: 192.168.10.0/26NETWORK 2: 192.168.10.64/27NETWORK 3: 192.168.10.96/27NETWORK 4: 192.168.10.128/30NETWORK 5: 192.168.10.132/30Which of the following routing protocols will support this IP addressing scheme?（）A. RIP version 1B. RIP version 2C. IGRPD. EIGRPE. OSPFF. BGP
RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?() A. CIDRB. Split horizonC. AuthenticationD. Classless maskingE. Hold-down timersF. Multicast routing updatesG. Path Vectoring
You need to choose a routing protocol for a new Testking network. This network will be running IP, IPX, and Appletalk, and you wish to utilize only one routing protocol. Which one would be the best choice?（）A. OSPFB. EIGRPC. RIP v2D. IGRPE. RIP v1
You are a network administrator and you need to implement a routing protocol onyour network that provides:* Scalability* VLSM support* Minimal overhead* Support for connecting networks using routers of multiple vendorsWhich of the following routing protocol would best serve your needs?（）A. VTPB. RIP version 1C. EIGRPD. OSPFE. IGRPF. CDP
管理员小李要为三层交换机配置支持VLSM的ripv2，并发布192.168.1.0/24的网络，则正确的是（ ）A.[Huawei]rip [Huawei-rip-1]version 2 [Huawei-rip-1]network 192.168.1.0 255.255.255.0B.[Huawei]rip [Huawei-rip-1]version 2 [Huawei-rip-1]network 192.168.1.0 24C.[Huawei]rip [Huawei-rip-1]version 2 [Huawei-rip-1]network 192.168.1.0 0.0.0.255D.[Huawei]rip [Huawei-rip-1]version 2 [Huawei-rip-1]network 192.168.1.0
A network administrator is designing a Cisco network for a large company. The network must be able to use minimal bandwidth for routing updates, converge quickly, and support VLSM, CIDR, IP and IPX. Which routing protocol will best fit the requirements of this network?（）A、RIP v1B、RIP v2C、IGRPD、OSPFE、EIGRP
Which three statements are correct about RIP version 2 (Choose three.)（）。A、It has the same maximum hop count as version 1B、It uses broadcasts for its routing updatesC、It is a classless routing protocolD、It has a lower default administrative distance than RIP version 1E、It supports authenticationF、It does not send the subnet mask in updates
RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?（）A、CIDRB、Split horizonC、AuthenticationD、Classless maskingE、Hold-down timersF、Multicast routing updatesG、Path Vectoring
Which three statements describe the differences between RIP version 1 and RIP version 2? (Choose three.)（）A、RIP version 1 broadcasts updates whereas RIP version 2 uses multicasts.B、RIP version 1 multicasts updates while RIP version 2 uses broadcasts.C、Both RIP version 1 and RIP version 2 are classless routing protocols.D、RIP Version 2 is a classless routing protocol whereas RIP version 1 is a classful routing protocol.E、Both RIP version 1 and version 2 support authentication.F、RIP version 2 sends the subnet mask in updates and RIP version 1 does not.
Which three statements are correct about RIP version 2? (Choose three.)（）A、It has the same maximum hop count as version 1.B、It uses broadcasts for its routing updates.C、It is a classless routing protocol.D、It has a lower default administrative distance than RIP version 1.E、It supports authentication.F、It does not send the subnet mask in updates.
You are a network administrator and you need to implement a routing protocol on your network that provides: * Scalability * VLSM support * Minimal overhead * Support for connecting networks using routers of multiple vendors Which of the following routing protocol would best serve your needs?（）A、VTPB、RIP version 1C、EIGRPD、OSPFE、IGRPF、CDP
You need to choose a routing protocol for a new Testking network. This network will be running IP, IPX, and Appletalk, and you wish to utilize only one routing protocol. Which one would be the best choice?（）A、OSPFB、EIGRPC、RIP v2D、IGRPE、RIP v1
A network administrator receives an error message while tring to configure the Ethernet interface of arouter with IP address 10.24.24.24/29.which statement explains the reason for this issue？（）A、The address is a broadcast addressB、The Ehernet interface is faultyC、VLSM-capable routing protocols must be enable first on the router.D、This address is a network address.
The Testking Network consists of the following 5 IP networks: NETWORK 1: 192.168.10.0/26 NETWORK 2: 192.168.10.64/27 NETWORK 3: 192.168.10.96/27 NETWORK 4: 192.168.10.128/30 NETWORK 5: 192.168.10.132/30 Which of the following routing protocols will support this IP addressing scheme?（）A、RIP version 1B、RIP version 2C、IGRPD、EIGRPE、OSPFF、BGP
Which routing protocols will support the following IP addressing scheme? （） Network 1 - 192.168.10.0 /26 Network 2 - 192.168.10.64 /27 Network 3 - 192.168.10.96 /27 Network 4 - 192.168.10.128 /30 Network 5 - 192.168.10.132 /30A、RIP version 1B、RIP version 2C、IGRPD、EIGRPE、OSPF
You are a network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. The company’s main office is in Barcelona， and it has branch offices in Paris and London. The company has no immediate plans to expand or relocate the offices. The company wants to connect the office networks by using a frame relay WAN connection and Routing and Remote Access servers that are configured with frame relay WAN adapters. Computers in each office will be configured to use the local Routing and Remote Access server as a default gateway. You are planning the routing configuration for the Routing and Remote Access servers. You need to allow computers in Barcelona， Paris， and London to connect to computers in any office. You want to minimize routing traffic on the WAN connection. What should you do？ （）A、 At each office， add the OSPF routing protocol to Routing and Remote Access， add the WAN adapter to the OSPF routing protocol， and deploy OSPF as a single-area internetwork.B、 At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 broadcast and the incoming packet protocol as RIP version 1 and 2.C、 At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 multicast and the incoming packet protocol as RIP version 2 only.D、 At each office， configure the Routing and Remote Access server with static routes to the local networks at the other two offices.
Your network contains a server named Server1 that has the Routing role service installed. Server1 has two network connections. One network connection connects to the internal network. The other network connection connects to the Internet.All network connections connected to the internal network use private IP addresses. You install a Web server named Web1. Web1 hosts a secured Web site that only allows connections over TCP port 8281. Web1 is connected to the internal network.You need to ensure that the secure Web site can be accessed from the Internet.What should you do from the Routing and Remote Access console？（）A、Configure Routing Information Protocol (RIP), and then activate authentication on the RIP interface.B、Configure Routing Information Protocol (RIP), and then configure the incoming packet protocol settings on the RIP interface.C、Configure Network Address Translation (NAT), and then add a new service to the NAT interface.D、Configure Network Address Translation (NAT), and then enable the Secure Web Server (HTTPS) service on the NAT interface.
单选题You are a network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. The company’s main office is in Barcelona， and it has branch offices in Paris and London. The company has no immediate plans to expand or relocate the offices. The company wants to connect the office networks by using a frame relay WAN connection and Routing and Remote Access servers that are configured with frame relay WAN adapters. Computers in each office will be configured to use the local Routing and Remote Access server as a default gateway. You are planning the routing configuration for the Routing and Remote Access servers. You need to allow computers in Barcelona， Paris， and London to connect to computers in any office. You want to minimize routing traffic on the WAN connection. What should you do？ （）A At each office， add the OSPF routing protocol to Routing and Remote Access， add the WAN adapter to the OSPF routing protocol， and deploy OSPF as a single-area internetwork.B At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 broadcast and the incoming packet protocol as RIP version 1 and 2.C At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 multicast and the incoming packet protocol as RIP version 2 only.D At each office， configure the Routing and Remote Access server with static routes to the local networks at the other two offices.
多选题RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?（）ACIDRBSplit horizonCAuthenticationDClassless maskingEHold-down timersFMulticast routing updatesGPath Vectoring
多选题Which three statements describe the differences between RIP version 1 and RIP version 2? (Choose three.)（）ARIP version 1 broadcasts updates whereas RIP version 2 uses multicasts.BRIP version 1 multicasts updates while RIP version 2 uses broadcasts.CBoth RIP version 1 and RIP version 2 are classless routing protocols.DRIP Version 2 is a classless routing protocol whereas RIP version 1 is a classful routing protocol.EBoth RIP version 1 and version 2 support authentication.FRIP version 2 sends the subnet mask in updates and RIP version 1 does not.
多选题Refer to the exhibit. A junior network administrator was given the task of configuring port security on SwitchA to allow only PC_A to access the switched network through port fa0/1. If any other device is detected, the port is to drop frames from this device. The administrator configured the interface and tested it with successful pings from PC_A to RouterA, and then observes the output from these two show commands.Which two of these changes are necessary for SwitchA to meet the requirements? （）APort security needs to be globally enabled.BPort security needs to be enabled on the interface.CPort security needs to be configured to shut down the interface in the event of a violation.DPort security needs to be configured to allow only one learned MAC address.EPort security interface counters need to be cleared before using the show command.FThe port security configuration needs to be saved to NVRAM before it can become active.
单选题You are a network administrator and you need to implement a routing protocol on your network that provides: * Scalability * VLSM support * Minimal overhead * Support for connecting networks using routers of multiple vendors Which of the following routing protocol would best serve your needs?（）AVTPBRIP version 1CEIGRPDOSPFEIGRPFCDP
多选题Which three statements are correct about RIP version 2 (Choose three.)（）。AIt has the same maximum hop count as version 1BIt uses broadcasts for its routing updatesCIt is a classless routing protocolDIt has a lower default administrative distance than RIP version 1EIt supports authenticationFIt does not send the subnet mask in updates
单选题The network administrator needs to address seven LANs. RIP version 1 is the only routing protocol in use on the network and subnet 0 is not being used. What is the maximum number of usable IP addresses that can be supported on each LAN if the organization is using one class C address block?（）A8B6C30D32E14F16