While troubleshooting connectivity issues, you log into a remote router. From there,you wish to see the layer 1 and layer 2 status of the interface.Which of the following IOS commands would you issue to check the current IP addressing, as well as theyer 1 and layer 2 status of an interface?（）A. TK1# show versionB. TK1# show protocolsC. TK1# show interfacesD. TK1# show controllersE. TK1# show ip interfaceF. TK1# show startup-config
While troubleshooting connectivity issues, you log into a remote router. From there,you wish to see the layer 1 and layer 2 status of the interface.Which of the following IOS commands would you issue to check the current IP addressing, as well as theyer 1 and layer 2 status of an interface?（）
A. TK1# show version
B. TK1# show protocols
C. TK1# show interfaces
D. TK1# show controllers
E. TK1# show ip interface
F. TK1# show startup-config
相关考题：
While troubleshooting a connectivity problem on the network, you issue the ping command from your PC command prompt, but the output shows "request times out."At which OSI layer is this problem associated with?A．The data link layerB．The application layerC．The access layerD．The session layerE．The network layer
While troubleshooting a connectivity issue from a PC you obtain the following information:Local PC IP address: 190.0.3.35/24Default Gateway: 190.0.3.1Remote Server: 190.0.5.250/24You then conduct the following tests from the local PC:Ping 127.0.0.1 - UnsuccessfulPing 190.0.3.35 - SuccessfulPing 190.0.3.1 - UnsuccessfulPing 190.0.5.250 – UnsuccessfulWhat is the underlying cause of this problem?A．TCP/IP not correctly installedB．Local physical layer problemC．NIC not functioningD．Remote physical layer problemE．None of the above
While troubleshooting a network connectivity issue, you suspect that a router may be missing a route, or may be receiving bad routing information to a destination. What command should you issue to view the route that the router will use to reach a given destination?（）A. pingB. traceC. show ip routeD. show interfaceE. show cdp neighbors
While troubleshooting a connectivity issue from a PC you obtain the following information: Local PC IP address: 190.0.3.35/24 Default Gateway: 190.0.3.1 Remote Server: 190.0.5.250/24 You then conduct the following tests from the local PC: Ping 127.0.0.1 - Unsuccessful Ping 190.0.3.35 - Successful Ping 190.0.3.1 - Unsuccessful Ping 190.0.5.250 - Unsuccessful What is the underlying cause of this problem?（）A、TCP/IP not correctly installedB、Local physical layer problemC、NIC not functioningD、Remote physical layer problem
While troubleshooting a connectivity issue from a PC you obtain the following information: Local PC IP address: 10.0.0.35/24 Default Gateway: 10.0.0.1 Remote Sever: 10.5.75.250/24 You then conduct the following tests from the local PC: Ping 127.0.0.1 – Successful Ping 10.0.0.35 – Successful Ping 10.0.0.1 – Unsuccessful Ping 10.5.75.250 – Unsuccessful What is the underlying cause of this problem?（）A、A remote physical layer problem exists.B、The host NIC is not functioning.C、TCP/IP has not been correctly installed on the host.D、A local physical layer problem exists.
You have a server that runs Windows Server 2003 Service Pack 2 （SP2）. The server has the Routing and Remote Access service enabled and is configured as a network address translation （NAT） router. You need to view a list of the current sessions on the Routing and Remote Access server and the private and public IP addresses and ports that are being used. What should you do？（）A、Run Nbtstat–S.B、Run Netstat–ano.C、From the Routing and Remote Access snap-in， right-click NAT/Basic Firewall and select Export List.D、From the Routing and Remote access snap-in， right-click the interface connected to the Internet and click Show Mappings.
EIGRP is being used as the routing protocol on the company network. While troubleshooting somenetwork connectivity issues， you notice a large number of EIGRP SIA （Stuck in Active） messages.What causes these SIA routes？（）A、The neighboring router stops receiving ACK packets from this routerB、The neighboring router starts receiving route updates from this routerC、The neighboring router is too busy to answer the query （generally caused by high CPUutilization）D、The neighboring router is having memory problems and cannot allocate the memory to processthe query or build the reply packet
While troubleshooting a connectivity problem on the network, you issue the ping command from your PC command prompt, but the output shows "request times out."At which OSI layer is this problem associated with?（）A、The data link layerB、The application layerC、The access layerD、The session layerE、The network layer
While troubleshooting connectivity issues, you log into a remote router. From there,you wish to see the layer 1 and layer 2 status of the interface. Which of the following IOS commands would you issue to check the current IP addressing, as well as theyer 1 and layer 2 status of an interface?（）A、TK1# show versionB、TK1# show protocolsC、TK1# show interfacesD、TK1# show controllersE、TK1# show ip interfaceF、TK1# show startup-config
While troubleshooting a network connectivity issue, you suspect that a router may be missing a route, or may be receiving bad routing information to a destination. What command should you issue to view the route that the router will use to reach a given destination?（）A、pingB、traceC、show ip routeD、show interfaceE、show cdp neighbors
You have been recently hired as a database administrator. Your senior manager asks you to study the production database server and submit a report on the settings done by the previous DBA. While observing the server settings， you find that the following parameter has been set in the parameter file of the database： REMOTE_OS_AUTHENT = TRUE What could have been the reason to set this parameter as TRUE？（）A、to enable operating system authentication for a remote clientB、to restrict the scope of administration to identical operating systemsC、to allow the start up and shut down of the database from a remote clientD、to enable the administration of the operating system from a remote clientE、to disable the administration of the operating system from a remote client
A user has a computer that runs Windows XP Professional. The user attempts to connect to the computer by using a Remote Desktop Connection and receives the following error message: “The local policy of the system does not permit you to log on interactively.” You need to ensure that the user can log on to the computer by using a Remote Desktop Connection. What should you do?（） A、From the System settings, disable Remote Assistance.B、Add the user's account to the Remote Desktop Users group. C、From Windows Firewall, modify the scope of the Remote Desktop exception. D、Set the Remote Desktop Help Session Manager service Startup type to Automatic, and then start the service.
You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server is configured as a router and provides access to the Internet. You need to log all connections made to the server. The log must contain the IP address and the port used to establish the connection. What should you do? （）A、Install Network Monitor Tools and create a new capture.B、Install Connection Manager Administration Kit （CMAK） and create a new profile.C、From Performance Logs and Alerts， create a trace log.D、From Routing and Remote Access， modify the Remote Access Logging settings.
You want to connect to your company network from your Windows 2000 Professional computer at home. You have an ISDN line that is used for internet connectivity. You create a VPN connection and are able to connect successfully to the company network. While connected to the company network, you are unable to access the Internet. What must you do so that you can access the Internet?（）A、Configure the ISDN connection to use SLIP instead of PPP.B、Select the Enable Internet Connection Sharing for this connection check box in the ISDN connection properties.C、Clear the Use default gateway on remote network check box.D、Install and configure the SAP Agent service.
You are the network administrator for Company.You need to connect to Company’s network from your Windows 2000 Professional computer at home.You have a DSL line that is used for Internet connectivity. You create an L2TP virtual private network（VPN） connection and are able to connect successfully to Company’s network. While connected toCompany’s network， you are unable to access the Internet.You want to be able to access the Internet while connected to Company’s network.How should you configure the connection properties？（）A、Configure the DSL connection to use PPTP instead of L2TP. B、Enable Internet Connection Sharing for the DSL connection properties. C、CLEAR THE Use default gateway on remote network check box. D、Clear the Require data encryption check box.
You have two computers named Computer1 and Computer2 that run Windows 7. You use Remote Desktopto connect from Computer1 to Computer2. You need to prevent the desktop background of Computer2from being displayed when you use Remote Desktop to connect to Computer2. What should you do on Computer1?（）A、From the Personalization options， change the theme.B、From the System properties， modify the Remote settings.C、From the Remote Desktop Connection options， modify the Performance setting.D、From the Remote Desktop Connection options， modify the Display configuration settings.
You have an Exchange Server 2010 Mailbox server.The server contains one mailbox database.You need to view the last logon time of all users in the organization.What should you do？（）A、From the Exchange Management Shell， run Get-MailboxDatabase.B、From the Exchange Management Shell， run Get-MailboxStatistics.C、From the Exchange Management Console， create and export a filter.D、From the Exchange Management Console， run the Remote Connectivity Analyzer.
You have an Exchange organization.All servers in the organization have Exchange Server 2010 Service Pack 1 （SP1） installed.You need to identify why a remote SMTP server rejects e-mail sent from the organization. What should you do？（）A、Modify the diagnostic logging level on the MSExchangeTransportService object， and then review the Application event logB、Modify the connectivity log settings on the Transport server， and then review the connectivity logs.C、Modify the message tracking settings on the Transport server， and then review the message tracking logs.D、Modify the protocol logging level on the Send connectors， and then review the protocol logs.
单选题While troubleshooting a network connectivity issue, you suspect that a router may be missing a route, or may be receiving bad routing information to a destination. What command should you issue to view the route that the router will use to reach a given destination?（）ApingBtraceCshow ip routeDshow interfaceEshow cdp neighbors
单选题You have been recently hired as a database administrator. Your senior manager asks you to study the production database server and submit a report on the settings done by the previous DBA. While observing the server settings， you find that the following parameter has been set in the parameter file of the database： REMOTE_OS_AUTHENT = TRUE What could have been the reason to set this parameter as TRUE？（）Ato enable operating system authentication for a remote clientBto restrict the scope of administration to identical operating systemsCto allow the start up and shut down of the database from a remote clientDto enable the administration of the operating system from a remote clientEto disable the administration of the operating system from a remote client
单选题While troubleshooting a connectivity issue from a PC you obtain the following information: Local PC IP address: 10.0.0.35/24 Default Gateway: 10.0.0.1 Remote Sever: 10.5.75.250/24 You then conduct the following tests from the local PC: Ping 127.0.0.1 – Successful Ping 10.0.0.35 – Successful Ping 10.0.0.1 – Unsuccessful Ping 10.5.75.250 – Unsuccessful What is the underlying cause of this problem?（）AA remote physical layer problem exists.BThe host NIC is not functioning.CTCP/IP has not been correctly installed on the host.DA local physical layer problem exists.
单选题While troubleshooting a connectivity issue from a PC you obtain the following information: Local PC IP address: 190.0.3.35/24 Default Gateway: 190.0.3.1 Remote Server: 190.0.5.250/24 You then conduct the following tests from the local PC: Ping 127.0.0.1 - Unsuccessful Ping 190.0.3.35 - Successful Ping 190.0.3.1 - Unsuccessful Ping 190.0.5.250 - Unsuccessful What is the underlying cause of this problem?（）ATCP/IP not correctly installedBLocal physical layer problemCNIC not functioningDRemote physical layer problem
多选题Your network is suffering from regular outages. After troubleshooting， you learn that the transmit lead of a fiber uplink was damaged. Which two features can prevent the same issues in the future？（）Aroot guardBloop guardCBPDU guardDUDLDEBPDU skew detection
单选题You have a computer that runs Windows XP Professional Service Pack 2 (SP2). A remote user has a computer that runs Windows XP Professional SP2. The remote user experiences several errors while attempting to install an application. You need to remotely observe the actions the user performs. What should you do first?（）AInstruct the user to send you a Remote Assistance invitation. BInstruct the user to start the Remote Desktop Help Session Manager service.CAt the command prompt, establish a telnet session to the user's computer. DEnable a Remote Desktop and establish a Remote Desktop Connection. Log on by using the local administrator account.
单选题You have two computers named Computer1 and Computer2 that run Windows XP Professional. A local printer is connected to Computer1. From Computer1, you establish a Remote Desktop Connection to Computer2. You discover that there are no printers available from within the Remote Desktop Connection. The event log on Computer 2 displays the following event: Source: TermServDevices, ID: 1111. Description: Driver Printer 1000 required for printer Printer 1000 is unknown. Contact the administrator to install the driver before you log on again. You need to ensure that you can send a print job to the print device connected to Computer1 from the Remote Desktop Connection. What should you do?（）AOn Computer1, reinstall the printer. BOn Computer1, run mstsc /console, and then connect to Computer2.COn Computer2, install the driver from the print device manufacturer. DOn Computer1, disable printers in the Remote Desktop Connection configuration.
多选题EIGRP is being used as the routing protocol on the company network. While troubleshooting somenetwork connectivity issues， you notice a large number of EIGRP SIA （Stuck in Active） messages.What causes these SIA routes？（）AThe neighboring router stops receiving ACK packets from this routerBThe neighboring router starts receiving route updates from this routerCThe neighboring router is too busy to answer the query （generally caused by high CPUutilization）DThe neighboring router is having memory problems and cannot allocate the memory to processthe query or build the reply packet
单选题You have a server that runs Windows Server 2003 Service Pack 2 （SP2）. The server has the Routing and Remote Access service enabled and connects to the Internet by using a demand-dial connection. From the Routing and Remote Access snap-in， you open the properties of the server and enable the Log additional Routing and Remote Access information setting. You need to review the log file for issues related to the demand-dial connection. Which file should you review？（）A%systemroot%/debug/netsetup.logB%systemroot%/debug/oakley.logC%systemroot%/tracing/ipnathlp.logD%systemroot%/tracing/ppp.log