Which two multicast IP addresses can be represented by the multicast MAC address 0100.5e0A.0A07?() A. 228.10.10.7B. 229.11.10.7C. 229.138.10.7D. 229.138.10.8E. 228.10.10.8F. 228.10.138.7
Which two multicast IP addresses can be represented by the multicast MAC address 0100.5e0A.0A07?()
A. 228.10.10.7
B. 229.11.10.7
C. 229.138.10.7
D. 229.138.10.8
E. 228.10.10.8
F. 228.10.138.7
相关考题：
Typically, an IP address refers to an individual host on a particular network. IP also accommodates addresses that refer to a group of hosts on one or more networks. Such addresses are referred to as multicast addresses, and the act of sending a packet from a source to the members of a （1）group is referred to as multicasting. Multicasting done （2）the scope of a single LAN segment is straightforward. IEEE 802 and other LAN protocols include provision for MAC-level multicast addresses. A packet with a multicast address is transmitted on a LAN Segment. Those stations that are members of the （3）multicast group recognize the multicast address and （4）the packet. In this case, only a single copy of the packet is ever transmitted. This technique works because of the （5）nature of a LAN: A transmission from any one station is received by all other station on the LAN.A.numerousB.onlyC.singleD.multicast@@@SXB@@@A.withinB.out ofC.beyondD.cover@@@SXB@@@A.differentB.uniqueC.specialD.corresponding@@@SXB@@@A.rejectB.acceptC.discardD.transmit@@@SXB@@@A.multicastB.unicastC.broadcastD.multiple unicast
Which two multicast IP addresses can be represented by the multicast MAC addre ss 0100.5e0A.0A07?() A. 228.10.10.7B. 229.11.10.7C. 229.138.10.7D. 229.138.10.8E. 228.10.10.8F. 228.10.138.7
Which two design concerns must be addressed when designing a multicast implementation?() A. only the low-order 23 bits of the MAC address are used to map IP addressesB. only the low-order 24 bits of the MAC address are used to map IP addressesC. only the high-order 23 bits of the MAC address are used to map IP addressesD. only the low-order 23 bits of the IP address are used to map MAC addressesE. the 0x01004f MAC address prefix is used for mapping IP addresses to MAC addressesF. the 0x01005e MAC address prefix is used for mapping IP addresses to MAC addresses
Typically, an IP address refers to an individual host on a particular network. IP also accommodates addresses that refer to a group of hosts on one or more networks. Such addresses are referred to as multicast addresses, and the act of sending a packet from a source to the members of a （1）group is referred to as multicasting. Multicasting done （2）the scope of a single LAN segment is straightforward. IEEE 802 and other LAN protocols include provision for MAC-level multicast addresses. A packet with a multicast address is transmitted on a LAN Segment. Those stations that are members of the （3）multicast group recognize the multicast address and （4）the packet. In this case, only a single copy of the packet is ever transmitted. This technique works because of the （5）nature of a LAN: A transmission from any one station is received by all other station on the LAN.空白（5）应选（ ）。 A. Multicast B. unicast C. broadcastD. multiple unicast
Typically, an IP address refers to an individual host on a particular network. IP also accommodates addresses that refer to a group of hosts on one or more networks. Such addresses are referred to as multicast addresses, and the act of sending a packet from a source to the members of a （1）group is referred to as multicasting. Multicasting done （2）the scope of a single LAN segment is straightforward. IEEE 802 and other LAN protocols include provision for MAC-level multicast addresses. A packet with a multicast address is transmitted on a LAN Segment. Those stations that are members of the （3）multicast group recognize the multicast address and （4）the packet. In this case, only a single copy of the packet is ever transmitted. This technique works because of the （5）nature of a LAN: A transmission from any one station is received by all other station on the LAN.空白（3）应选（ ）。 A. Different B. unique C. specialD. corresponding
Typically，an IP address refers to an individual host on a particular network. IP also accommodates addresses that refer to a group of hosts on one or more networks.Such addresses are referred to as multicast addresses，and the act of sending a packet from a source to the members of a （71）group is referred to as multicasting. Multicasting done （72） the scope of a single LAN segment is straight forward. IEEE 802 and other LAN protocols include provision for MAC-level multicast addresses. A packet with a multicast address is transmitted on a LAN segment.Those stations that are members of the （73）multicast group recognize the multicast address and （74）the packet.In this case,only a single copy of the packet is ever transmitted.This technique works because of the （本题）nature of a LAN:A transmission from any one station is received by all other stations on the LAN. A .multicastB. unicastC.broadcastD.multiple unicast
Which three IP multicast address related statements are true?（）A、Multicast addresses 224.0.0.13 and 224.0.0.22 are reserved link - local addresses used by PIMv2 and IGMPv3B、Because they would map to overlapping IP multicast MAC addresses, multicast addresses 224.0.1.1 and 238.1.1.1 could not be used toget herC、Multicast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted with Time to Live (TTL) greater than 1D、Multicast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routersE、The a dministratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in purpose to RFC 1918 private unicast addressesF、Multicast address 224.0.1.1 has been reserved for the Network Time Protocol (NTP) by the IANA
Which three IP multicast group concepts are true?（）A、If a packet is sent to a multicast group address, the multicast frame contains the source multicast address.B、A router does not have to be a member of a multicast group to receive multicast data.C、A router must be a member of a multicast group to send to the group.D、A router does not have to be a member of a multicast group to send to the group.E、If a packet is sent to a multicast group address, all members of the multicast group will rece ive it.F、A router must be a member of a multicast group to receive multicast data.
In computer networking a multicast address is an identifier for a group of hosts that have joined amulticast group. Multicast addressing can be used in the Link Layer （OSI Layer 2）， such as Ethernet Multicast， as well as at the Internet Layer （OSI Layer 3） as IPv4 or IPv6 Multicast. Whichtwo descriptions are correct regarding multicast addressing？（）A、The first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value thatindicates a multicast applicationB、The last 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast applicationC、To calculate the Layer 2 multicast address， the host maps the last 23 bits of the IP address intothe last 24 bits of the MAC address. The high-order bit is set to 0D、The first 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application
Which three IP multicast address related statements are true？ （Choose three.） （） A、Multicast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted with Time to Live （TTL） greater than 1.B、Multicast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routers.C、Multicast addresses 224.0.0.13 and 224.0.0.22 are reserved link-local addresses used by PIMv2 and IGMPv3.D、Because they would map to overlapping IP multicast MAC addresses， multicast addresses 224.0.1.1 and 238.1.1.1 could not be used together.E、Multicast address 224.0.1.1 has been reserved for the Network Time Protocol （NTP） by the IANAF、The administratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in purpose to RFC 1918 private unicast addresses.
Which two are characteristics of an IPv6 multicast address？（）A、First （most significant ） octet is FF in hexB、Starts with a prefix of FE80 to FEBF in hexC、Starts with a prefix of FECO to FEFF in hexD、Second octet contains a 4-bit multicast scope fieldE、Last 64 bit contains the modified MAC address of the Ethernet interfaceF、Is allocated from the unicast address space
Which three statements about anycast RP are true？ （）A、MSDP is running between anycast RPsB、Anycast RP provides redundancy and load-sharing capabilitiesC、Multicast BGP is running between anycast RPsD、In anycast RP，two or more RPs are configured with the same multicast IP address on loopback interfacesE、In anycast RP，two or more RPs are configured with the same unicast IP address on loopback interfaces
Which two IP multicast addresses belong to the group represented by the MAC address of 0x01-00-5E-15-6A-2C？ （）A、 224.21.106.44B、 224.25.106.44C、 233.149.106.44D、 236.25.106.44E、 239.153.106.44
Which three IP multicast related statements are true？ （Choose three.） （）A、 Multicast addresses 224.0.1.0 through 238.255.255.255 are called globally scoped addresses. They are used to multicast data between organizations and across the InternetB、 The multicast address 224.0.0.1 is a globally scoped address that has been reserved for the Network Time Protocol （NTP） by the IANAC、 Multicast addresses 239.0.0.0 through 239.255.255.255 are called limited scope addresses. They are constrained to a local group or organizationD、 Multicast addresses 224.0.0.5 and 224.0.0.6 are limited scoped addresses that have been reserved for OSPFE、 Multicast addresses 224.0.0.0 through 224.0.0.255 are used for network protocols on local LAN segments. Because they are always transmitted with a Time to Live （TTL） of 1， they are never forwarded by a router
Which two multicast IP addresses can be represented by the multicast MAC addre ss 0100.5e0A.0A07?（）A、228.10.10.7B、229.11.10.7C、229.138.10.7D、229.138.10.8E、228.10.10.8F、228.10.138.7
Which two multicast IP addresses can be represented by the multicast MAC address 0100.5e0A.0A07?（）A、228.10.10.7B、229.11.10.7C、229.138.10.7D、229.138.10.8E、228.10.10.8F、228.10.138.7
Which two statements are true about the primary address on an interface?（）A、It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface.B、You use the primary address when you have multiple IP addresses belonging to the same subnet on the same interface.C、It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface.D、By default, the primary address on an interface is selected as the numerically highest local address configured on the interface.
Which two statements are true about the primary address on an interface?（）A、It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interfaceB、You use the primary address when you have multiple IP addresses belonging to the same subnet on the same interfaceC、It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interfaceD、By default, the primary address on an interface is selected as the numerically highest local address configured on the interface
多选题Which two design concerns must be addressed when designing a multicast implementation？（）Aonly the low-order 23 bits of the MAC address are used to map IP addressesBonly the low-order 24 bits of the MAC address are used to map IP addressesConly the high-order 23 bits of the MAC address are used to map IP addressesDonly the low-order 23 bits of the IP address are used to map MAC addressesEthe 0x01004f MAC address prefix is used for mapping IP addresses to MAC addressesFthe 0x01005e MAC address prefix is used for mapping IP addresses to MAC addresses
多选题Which two multicast IP addresses can be represented by the multicast MAC addre ss 0100.5e0A.0A07?（）A228.10.10.7B229.11.10.7C229.138.10.7D229.138.10.8E228.10.10.8F228.10.138.7
多选题Which three IP multicast address related statements are true？ （Choose three.） （）AMulticast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted with Time to Live （TTL） greater than 1.BMulticast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routers.CMulticast addresses 224.0.0.13 and 224.0.0.22 are reserved link-local addresses used by PIMv2 and IGMPv3.DBecause they would map to overlapping IP multicast MAC addresses， multicast addresses 224.0.1.1 and 238.1.1.1 could not be used together.EMulticast address 224.0.1.1 has been reserved for the Network Time Protocol （NTP） by the IANAFThe administratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in purpose to RFC 1918 private unicast addresses.
多选题Which three IP multicast address related statements are true?（）AMulticast addresses 224.0.0.13 and 224.0.0.22 are reserved link - local addresses used by PIMv2 and IGMPv3BBecause they would map to overlapping IP multicast MAC addresses, multicast addresses 224.0.1.1 and 238.1.1.1 could not be used toget herCMulticast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted with Time to Live (TTL) greater than 1DMulticast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routersEThe a dministratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in purpose to RFC 1918 private unicast addressesFMulticast address 224.0.1.1 has been reserved for the Network Time Protocol (NTP) by the IANA
多选题Which three IP multicast related statements are true？ （Choose three.） （）AMulticast addresses 224.0.1.0 through 238.255.255.255 are called globally scoped addresses. They are used to multicast data between organizations and across the InternetBThe multicast address 224.0.0.1 is a globally scoped address that has been reserved for the Network Time Protocol （NTP） by the IANACMulticast addresses 239.0.0.0 through 239.255.255.255 are called limited scope addresses. They are constrained to a local group or organizationDMulticast addresses 224.0.0.5 and 224.0.0.6 are limited scoped addresses that have been reserved for OSPFEMulticast addresses 224.0.0.0 through 224.0.0.255 are used for network protocols on local LAN segments. Because they are always transmitted with a Time to Live （TTL） of 1， they are never forwarded by a router
多选题Which two statements are true about the primary address on an interface? （）AIt is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interfaceBYou use the primary address when you have multiple IP addresses belonging to the same subnet on the same intefaceCIt can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interfaceDBy default, the primary address on an interface is selected as the nmerically highest local address configured on the interface
多选题Which two statements are true about the primary address on an interface?（）AIt is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface.BYou use the primary address when you have multiple IP addresses belonging to the same subnet on the same interface.CIt can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface.DBy default, the primary address on an interface is selected as the numerically highest local address configured on the interface.
多选题In computer networking a multicast address is an identifier for a group of hosts that have joined amulticast group. Multicast addressing can be used in the Link Layer （OSI Layer 2）， such as Ethernet Multicast， as well as at the Internet Layer （OSI Layer 3） as IPv4 or IPv6 Multicast. Whichtwo descriptions are correct regarding multicast addressing？（）AThe first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value thatindicates a multicast applicationBThe last 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast applicationCTo calculate the Layer 2 multicast address， the host maps the last 23 bits of the IP address intothe last 24 bits of the MAC address. The high-order bit is set to 0DThe first 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application
多选题Which two multicast IP addresses can be represented by the multicast MAC address 0100.5e0A.0A07?（）A228.10.10.7B229.11.10.7C229.138.10.7D229.138.10.8E228.10.10.8F228.10.138.7