Which IEEE standard protocol is initiated as a result of successful DTP completion in a switch over FastEthernet?() A. 802.3adB. 802.1wC. 802.1QD. 802.1d
Which IEEE standard protocol is initiated as a result of successful DTP completion in a switch over FastEthernet?()
A. 802.3ad
B. 802.1w
C. 802.1Q
D. 802.1d
相关考题：
● Ethernet is the commonly used local area network communication protocol. The standard of Ethernet is __(72)__.（72）A．IEEE 802.1 B．IEEE 802.2 C．IEEE 802.3 D．IEEE 802.11
在一台Cisco Catalyst 2950交换机上作如下配置：Switch # config terminalSwitch (config) # interface fastethernet 0/1Switch (config-if) # switchport mode accessSwitch (config-if) # switchport access vlan2若要将fastethernet 0/1端口还原到默认配置状态，可以使用( )命令。A、Switch (config) # default fastethernet 0/1B、Switch (config) # default interface fastethernet 0/1C、Switch (config) # no fastethernet 0/1D、Switch (config) # erase interface fastethernet 0/1
Which three BGP states follow the successful completion of the underlying TCP connectivity? ()(Choose three.) A.IdleB.ConnectC.Open SentD.EstablishedE.Open Confirm
You are bringing up a new Ezonexam switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?A．Switch(config)# switchport trunk encapsulation islB．Switch(config)# switchport trunk encapsulation ietfC．Switch(config-if)# switchport trunk encapsulation islD．Switch(config-if)# switchport trunk encapsulation ietfE．Switch(config-if)# switchport trunk encapsulation dot1q
Which IEEE standard is used to define Wi－Fi?() A. IEEE 802.3B. IEEE 802.5C. IEEE 802.11hD. IEEE 802.11cE. IEEE 802.11
Switch ports operating in which two roles will forward traffic according to the IEEE 802.1w standard?() A.alternateB.backupC.designatedD.disabledE.root
Ethernet is the commonly used local area network communication protocol. The standard of Ethernet is （ ） .A.IEEE 802.1B.IEEE 802.2C.IEEE 802.3D.IEEE 802.11
Switch ports operating in which two roles will forward traffic according to the IEEE 802.1w standard?（）A、alternateB、backupC、designatedD、disabledE、root
Which spanning Tree Protocol has been implemented on switch 2？ （）A、STP/IEEE 802.1DB、MSTP/IEEE 802.1sC、PVST+D、PVRSTE、None of the other alternatives apply
Which two of these are recommended practices with trunks？ （）A、 use ISL encapsulationB、 use 802.1q encapsulationC、 set ISL to desirable and auto with encapsulation negotiate to support ILS protocol negotiationD、 use VTP server mode to support dynamic propagation of VLAN information across the network E、 set DTP to desirable and desirable with encapsulation negotiate to support DTP protocol negotiation.
Switch R1 has been configured with DTP using the desirable option. Which statement describes Dynamic Trunking Protocol （DTP） desirable mode？（）A、 The interface actively attempts to convert the link to a trunk link.B、 The interface is put into permanent trunking mode but prevented from generating DTP frames. C、 The interface is put into permanent trunking mode and negotiates to convert the link into a trunk link.D、 The interface is put into a passive mode， waiting to convert the link to a trunk link. E、 None of the other alternatives apply
The core Company switches are configured to use 802.1Q trunks. Which three statements are correct with regard to the IEEE 802.1Q standard？（）A、 The IEEE 802.1Q frame format adds a 4 byte field to a Ethernet frameB、 The packet is encapsulated with a 26 byte header and a 4 byte FCSC、 The protocol uses point-to-multipoint connectivityD、 The protocol uses point-to-point connectivityE、 The IEEE 802.1Q frame uses multicast destination of 0x01-00-0c-00-00F、 The IEEE 802.1Q frame retains the original MAC destination address
You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?（）A、Switch(config)# switchport trunk encapsulation islB、Switch(config)# switchport trunk encapsulation ietfC、Switch(config-if)# switchport trunk encapsulation islD、Switch(config-if)# switchport trunk encapsulation ietfE、Switch(config-if)# switchport trunk encapsulation dot1q
Which IEEE standard is used to define Wi-Fi?（）A、IEEE 802.3B、IEEE 802.5C、IEEE 802.11hD、IEEE 802.11cE、IEEE 802.11
Which IEEE standard protocol is initiated as a result of successful DTP completion in a switch over FastEthernet?（）A、802.3adB、802.1wC、802.1QD、802.1d
Which two of these are recommended practices with trunks？（）A、use ISL encapsulationB、use 802.1q encapsulationC、set ISL to desirable and auto with encapsulation negotiate to support ILS protocol negotiationD、use VTP server mode to support dynamic propagation of VLAN information across the networkE、set DTP to desirable and desirable with encapsulation negotiate to support DTP protocol negotiation
You need to configure a new Company switch to support DTP. Which DTP switchport mode parameter sets the switch port to actively send and respond to DTP negotiation frames？ （）A、 AccessB、 No negotiateC、 TrunkD、 Dynamic desirableE、 Dynamic autoF、 None of the other alternatives apply
Which three BGP states follow the successful completion of the underlying TCP connectivity? （）(Choose three.)A、IdleB、ConnectC、Open SentD、EstablishedE、Open Confirm
Which three resource plan parameters are used to enable Automatic Consumer Group Switching to estimate job execution times automatically， and to perform a switch to a low priority consumer group before they are initiated？（）A、SWITCH_TIMEB、SWITCH_GROUPC、MAX_SESS_POOLD、SWITCH_ESTIMATE
多选题The core Company switches are configured to use 802.1Q trunks. Which three statements are correct with regard to the IEEE 802.1Q standard？（）AThe IEEE 802.1Q frame format adds a 4 byte field to a Ethernet frameBThe packet is encapsulated with a 26 byte header and a 4 byte FCSCThe protocol uses point-to-multipoint connectivityDThe protocol uses point-to-point connectivityEThe IEEE 802.1Q frame uses multicast destination of 0x01-00-0c-00-00FThe IEEE 802.1Q frame retains the original MAC destination address
单选题Switch R1 has been configured with DTP using the desirable option. Which statement describes Dynamic Trunking Protocol （DTP） desirable mode？（）A The interface actively attempts to convert the link to a trunk link.B The interface is put into permanent trunking mode but prevented from generating DTP frames. C The interface is put into permanent trunking mode and negotiates to convert the link into a trunk link.D The interface is put into a passive mode， waiting to convert the link to a trunk link. E None of the other alternatives apply
单选题You need to configure a new Company switch to support DTP. Which DTP switchport mode parameter sets the switch port to actively send and respond to DTP negotiation frames？ （）A AccessB No negotiateC TrunkD Dynamic desirableE Dynamic autoF None of the other alternatives apply
单选题Which IEEE standard protocol is initiated as a result of successful DTP completion in a switch overFastEthernet？（）A802.3adB802.1wC802.1QD802.1d
多选题Which two of these are recommended practices with trunks？（）Ause ISL encapsulationBuse 802.1q encapsulationCset ISL to desirable and auto with encapsulation negotiate to support ILS protocol negotiationDuse VTP server mode to support dynamic propagation of VLAN information across the networkEset DTP to desirable and desirable with encapsulation negotiate to support DTP protocol negotiation
多选题Switch ports operating in which two roles will forward traffic according to the IEEE 802.1w standard?（）AalternateBbackupCdesignatedDdisabledEroot
多选题Which three BGP states follow the successful completion of the underlying TCP connectivity? （）(Choose three.)AIdleBConnectCOpen SentDEstablishedEOpen Confirm
单选题Which spanning Tree Protocol has been implemented on switch 2？ （）ASTP/IEEE 802.1DBMSTP/IEEE 802.1sCPVST+DPVRSTENone of the other alternatives apply