Companycom wants to know how to keep track of the latest level of microcode for their p5 systems to stay current. What is the best way to monitor for new microcode?（）A、Run lscfg -vl, and check the ROM levelsB、Run cfgmgr -v, and check the ROM levelsC、Run inventory scout, and check the installed levelsD、Run lslpp -l grep devices, and check the filesets installed
Companycom wants to know how to keep track of the latest level of microcode for their p5 systems to stay current. What is the best way to monitor for new microcode?（）
- A、Run lscfg -vl, and check the ROM levels
- B、Run cfgmgr -v, and check the ROM levels
- C、Run inventory scout, and check the installed levels
- D、Run lslpp -l grep devices, and check the filesets installed
相关考题：
A customer reports that error messages occasionally appear and quickly disappear. Which of thefollowing is the BEST place for a technician to begin troubleshooting this issue?() A. Run a System RestoreB. Check Device ManagerC. Check the Event LogsD. Check the System Information
A user wants to install a new game and needs to make sure the proper version of DirectX isinstalled. Which of the following is the BEST way to check for the DirectX version?（）A、REGEDITB、services.mscC、DxdiagD、msconfig
Companycom is converting an application over to a p5 595 server with LPARs and has underestimated the processor requirements. The system has COD processors, but the customer does not know how to size the workload. What course of action would help identify the processor requirement?（）A、Activate the Trial COD for the processors and run a test to verify outcomeB、Activate the On/Off COD for the processors and run a test to verify outcomeC、Use rmss to simulate the processor workload and run a test to verify outcomeD、Use rmps to simulate the processor workload and run a test to verify outcome
An administrator has received an update CD with the latest technology level for AIX 5.3. The current operating system level of the server is at base AIX 5.3. What action needs to be taken to apply the new technology level to the server？（）A、Run smit update_allB、Run smit install_allC、Boot from the installation mediaD、Run the update_all command from the mounted CD
A Windows XP Professional PC needs to be checked for compatibility before being upgraded toWindows Vista Business. Which of the following would be the BEST action to take before theupgrade?（）A、Run the Windows Vista Upgrade Advisor on the target pc.B、Check the README file on the Vista installationdvd for system requirements.C、Check the manufacturer’s support pages for system requirements.D、Run the Windows AIK on the Vista installation dvd.
A customer reports that error messages occasionally appear and quickly disappear. Which of thefollowing is the BEST place for a technician to begin troubleshooting this issue?（）A、Run a System RestoreB、Check Device ManagerC、Check the Event LogsD、Check the System Information
Companycom is migrating from p670 systems running AIX 5.2 to p5 595 systems running AIX 5.3. They will be changing out only the system units. They will re-use the existing 61D drawers and adapters with the new p5 595 systems. What compatibility issue must be considered?（） A、APV features are not supported for some legacy POWER4 adaptersB、APV will require the most current maintenance level for AIX 5.2C、APV features will require that legacy POWER4 adapters be updated with new microcodeD、The Virtual IO Server must run AIX 5.3 and the LPARs can run either AIX 5.2 or AIX 5.3
An application fails to start after a Technology Level upgrade. The application vendor recommends that two filesets upgraded as part of the new Technology Level be rejected. What is the recommended method for performing this task?（）A、Run instfix -u to reject the filesets.B、Run installp -r to reject the filesets.C、Run installp -u to uninstall the filesets.D、Restore the system to previous state from the system backup.
Companycom has just added some new disk drives to a p5 590. The customer needs to know the largest Logical Track Group that these drives will support. What is the best way to locate this information?（）A、Use lquerypv to read the driveB、Use lspv and look at PP Size valueC、Look on the outside of the drive itselfD、Use bootinfo to find the LTG on the drive
Companycom wants to deploy WebSphere in an HACMP environment, running on two servers in LPARs. These servers will also host the test and dev LPARs. The customer would like to use the test and dev resources to support an HACMP failover. What is the best way to accomplish this task?（）A、Run the test and dev LPARs in an uncapped modeB、Activate COD resources if a failover should occurC、Use DLPAR to move resources between the test and dev and the HACMP LPARD、Stop the test and dev environments， bring up new profile for HACMP failover
Companycom is currently using a p690 and has just ordered a p5 590. They prefer to run in full system partition mode, since their application will utilize all the resources in the machine, and they don't want the overhead of an LPAR. What is the best response to the customer about the POWER5 capabilities?（）A、POWER5 runs in an SMP mode as defaultB、POWER5 can run in a full system mode the same as the p690C、POWER5 can run in full system mode with the purchase of PLMD、POWER5 can run in a full system mode， but it is in LPAR mode
An administrator suspects problems on a SCSI hard disk， but upon running diagnostics， no errors were found. What must be done to check the condition of the drive？（）A、Run diag and select the ’Certify Media’ task.B、Perform a read and write test on the disk and monitor errorlog.C、Update the disk firmware to the latest level and monitor errorlog.D、Format the disk to ensure bad blocks are omitted from the disk layout.
Companycom is migrating their application that was built on AIX 4.3, to a new p5 590 system that is running AIX 5.3. The application was a 32-bit program. What will need to be done with the application to allow it to run on the new system?（）A、Run without recompiling on AIX 5.3B、Relink to the 32-bit kernel in order to run the applicationC、Recompile to run on AIX 5.3 because the libraries are in different locationsD、Recompile 32-bit applications because the compiler flags and versions have changed
How does an administrator, logged in as padmin, check what commands have been recently run on the VIO server?（）A、lsgcl B、lsrep C、padmin_history D、alog o t console
An administrator wants to test the performance of an application at different memory sizes. What is the most effective way to perform the test and collect statistical information for each test？（） A、Run DLPAR to change the LPAR memory for each test.B、Run rmss command to simulate different memory for each test.C、Run chdev command to limit the system memory size for each test.D、Run chattr command to limit the system memory size for each test.
Companycom is planning on upgrading from a pSeries S85 running AIX 4.3.3 to a p5 570 with an HMC. The new server will run AIX 5L 5.2. What should be performed prior to the migration?（）A、Verify the ISV application runs on AIX 5.2B、Power4 to POWER5 upgrades are not supported without a application recompileC、Check the placement and size of the boot logical volume and disk space requirements on the S85D、AIX 4.3.3 to AIX 5L 5.2 migrations are perfectly compatible so nothing needs to be checked
An administrator plans to attach an IBM DS6000 and needs to know if the fibre channel adapter is at the latest firmware level. Which of the following is the fastest way for the administrator to determine the atest supported microcode level （）A、Call TechlineB、Validate via DS6000 menuC、Access IBM Storage WebsiteD、Contact the IBM Business Partner
After rebooting the machine, Companycom notices that the machine is not performing as well as before. The applications are running slower, and their CPU utilization has increased. How can the customer check to see if a CPU was deallocated?（）A、Run the vmstat commandB、Run the iostat commandC、Run the lparstat commandD、Check the logs in the /var/adm/ras directory
A system administrator is responsible for a vast and growing collection of dissimilar AIX systems. The verification of microcode levels and installation of new microcode is becoming increasingly unmanageable. What tool can be used to discover the existence of new microcode and automate the download and installation?（）A、NIMB、HMCC、sumaD、invscout
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters. How should the administrator configure the disks?（）A、Run 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.B、Run 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.C、Run 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.D、Run 'cfgmgr' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
Which of the following commands should be used to check the settings for a new tty that was just set up as tty2？（）A、lsattr -El tty2B、lscons -d /dev/tty2C、lscfg -vl tty2D、what /dev/tty2
Company.com is adding a new I/O drawer to an existing p5-570 with four LPARs and wants to re-balance the network cards in the I/O drawers. What is the best way to accomplish this？（）A、Add the devices as virtual adapters to a VIO server first,then add the I/O drawer and create the shared ethernet adaptersB、Power down the partitions,run the diag a command when the system is brought back up and reconfigure the network cardsC、Use the rmdev command to remove the devices,shut down the partitions and move the cads,then run the cfgmgr command after rebootD、Detach the network cards,run rmdev on the devices and then dynamically reassign theadapters to the partitions and reconfigure
Examine the section of the Health Check report given below： DBMS_HM.GET_RUN_REPORT（’HM_RUN_1061’） Run Name ： HM_RUN_1061 Run Id ： 1061 Check Name ： Data Block Integrity Check Mode ： REACTIVE Status ： COMPLETED Start Time ： 2007-05-12 22：11：02.032292 -07：00 End Time ： 2007-05-12 22：11：20.835135 -07：00 Error Encountered ： 0 Source Incident Id ： 7418 Number of Incidents Created ：0 Which two statements are true regarding the Health Check report？（）A、 Health Check was performed manually.B、 Health Check was performed to check the disk image block corruptions.C、 Health Check was performed to check interblock and intersegment corruption.D、 Health Check was performed to verify the integrity of database files and report failures.E、 Health Check was performed by the Health Monitor automatically in response to a critical error.
单选题A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters. How should the administrator configure the disks?（）ARun 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.BRun 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.CRun 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.DRun 'cfgmgr' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
单选题Companycom wants to know how to keep track of the latest level of microcode for their p5 systems to stay current. What is the best way to monitor for new microcode?（）ARun lscfg -vl, and check the ROM levelsBRun cfgmgr -v, and check the ROM levelsCRun inventory scout, and check the installed levelsDRun lslpp -l grep devices, and check the filesets installed
单选题Companycom is migrating their application that was built on AIX 4.3, to a new p5 590 system that is running AIX 5.3. The application was a 32-bit program. What will need to be done with the application to allow it to run on the new system?（）ARun without recompiling on AIX 5.3BRelink to the 32-bit kernel in order to run the applicationCRecompile to run on AIX 5.3 because the libraries are in different locationsDRecompile 32-bit applications because the compiler flags and versions have changed